Data Sheet

Product Information

Page 1 of 2

EPIC® H-A 4 Valid: 07.02.2012

H-A inserts with screw termination up to 2.5 mm² wire cross section

Product Description

H-A inserts with screw termination up to 2.5 mm² wire cross section;The small H-A 4s are used wherever space is at a

minimum. Screw termination with straight cable insertion from the rear

Application range

• Machine and equipment manufacturing

• Control engineering

Benefits

• H-A inserts with screw termination up to 2.5 mm² wire cross section

• The small H-A 4s are used wherever space is at a minimum. Screw termination with straight cable insertion from

the rear

PAGE 1
Product Information Page 1 of 2 EPIC® H-A 4 Valid: 07.02.2012 H-A inserts with screw termination up to 2.5 mm² wire cross section Product Description H-A inserts with screw termination up to 2.5 mm² wire cross section;The small H-A 4s are used wherever space is at a minimum. Screw termination with straight cable insertion from the rear Application range • Machine and equipment manufacturing • Control engineering Benefits • H-A inserts with screw termination up to 2.
PAGE 2
Product Information Page 2 of 2 EPIC® H-A 4 Valid: 07.02.2012 Technical Data Rated voltage (V) Termination methods IEC: 400 V UL: 600 V CSA: 600 V Screw termination: 0.5 - 2.5 mm² (2.5 mm² with conductor Rated impulse voltage end sleeves depending on the crimping profile) 4 kV Cycle of mechanical operation Rated current (A) 100 IEC: 23 A UL: 10 A CSA: 10 A Temperature range Contact resistance -40 °C to +100 °C, short-term up to +125 °C 1.