Laon Technology KUM1000-MA0-03 AUG 23, 2019 LAON Technology Co., Ltd.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Revisions Date Version AUG 23, 2019 1.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 3/ 19 - Contents 1. Overview ................................................................................................................. 4 1.1. 2. 3. Features and Functions ........................................................................................ 4 Specifications ............................................................................................................ 5 2.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 4/ 19 1. Overview 1.1. Features and Functions LAON Technology(‘LAON’)’s KUM1000-MA0-03(“MA0-03”) has been designed to meet IEEE 802.11a standard specification requirements adopting 5.0GHz band which provides sufficient number of usable channels for smooth full-duplex audio communications with less frequency interferences.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 5/ 19 2. Specifications 2.1. “MA0-03” specifications No 1 Parameters Specifications Frequency Band Remarks - 5170MHz ~ 5250MHz 1 - 5250MHz ~ 5330MHz 2 - 5490MHz ~ 5710MHz 3 2 Channel Band Width 20MHz 3 Wireless Media OFDM Refer to ‘Channel ID’ BPSK : 6Mbps 4 QPSK : 12Mbps Modulation 16-QAM : 36MbPs 5 Data Rate 6Mbps,12Mbps,36Mbps 6 Transmitted Power - +26dBm(Max.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 6/ 19 The channels and frequency bandwidths currently being used by “MA0-02” are as following tables. 1) Frequency band: 5170~5250MHz No. LaON Channel WiFi Channel Center ID Freq. Range Remarks Freq. 1 2 36 5180 MHz 5170~5190 MHz 2 3 40 5200 MHz 5190~5120 MHz 3 4 44 5220 MHz 5210~5230 MHz 4 5 48 5240 MHz 5230~5250 MHz Center Freq. Range 2) Frequency band: 5250~5330MHz No.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 8 19 128 5640 MHz 5630~5650MHz DFS 9 20 132 5660 MHz 5650~5670 MHz DFS 10 21 136 5680 MHz 5670~5690 MHz DFS 11 22 140 5700 MHz 5690~5710 MHz DFS 2.2. Pin Maps (System Interface) 1) CON1 : Connector : 04-6296-051-931846 1-1.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 43 I2C_EN O I2C Enable /GPIO15 45 Ni-MH Input AI Battery Monitoring 47 GND Page 8/ 19 - Pin Maps Continued (CON1) 1-4.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 40 VCC VCC +3.3V 42 VCC VCC +3.3V 44 VCC VCC +3.3V 46 GND 48 GND 50 GND 2) CON2 : Connector : 04-6296-051-931846 2-1.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 45 CLK_20MHz O 47 ETH_WE O 49 ETH_RD O 51 ETH_CE O - Pin Maps Continued (CON2) 2-3. Ethernet Address Pin No Pin Name Type8 2 Address0 I 4 Address1 I 6 Address2 I 8 Address3 I 10 Address4 I 12 Address5 I 14 Address6 I 16 Address7 I 18 Address8 I 20 Address9 I 22 Address10 I 24 Address11 I 26 Address12 I 28 Address13 I Description TCP/IP Address[ 0..
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 11/ 19 2-5. UART2 46 UART_Tx2 O UART2_Tx /GPIO16 48 UART_Rx2 I UART2_Rx /GPIO17 50 GND 3. Product applications and cases 3.1. Product applications “MA0-03” has been developed with a focus on miniaturization in view of various applications that require even compact and portable devices.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 12/ 19 3.2.1. System usages Below is a system configuration example in indoor to fill the blind spots or halls of wireless coverage using the Base Station(in the middle of the image below) and UTP Cable. Using this system enables audio communications even in blind areas and supports fully flexible scalability to expand wireless coverage regardless of the places within the network.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 4.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 14/ 19 5. Operating Description 1) Operating Frequency Range Operating Frequency Range is that : - 1st Band : 5150MHz ~ 5250MHz - 2nd Band : 5250MHz ~ 5330MHz - 3rd Band : 5490MHz ~ 5710MHz 2) MAX2829 IC It performs modulation function to send DATA after generating 5GHz TX frequency required by LAON ASIC MCU control. It also performs the ability to amplify the desired RF POWER LEVEL in DRIVE AMP.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 Page 15/ 19 a switch that is operated only during the RX cycle. It is amplified from the DRIVER AMP to a demodulator level on the MAX2829. It also uses 5GHz BPF to eliminate unnecessary frequencies.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 6. Parts Layout 6.1.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 6.2.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 7. KUM1000-MA0-03 Page 18/ 19 RF Shield Method Use RF shield can as the RF shield method. Shield can Size : 19 X 43.5 X 2 mm The RF module is protected by a shield can. The shield can not be removed by hand without tools. The shield can is tightly sealed. It is designed to be opened only with sharp tools such as tweezers.
Document name : Product Spec. Date prepared: July 11, 2019 Product: Version : 1.0 KUM1000-MA0-03 8. Label 8.1.
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.