Note: This unit is based on Android 4.4.4 platform. Besides the standard Apps we provided with the unit, you can also download thousands of Apps and install it on our platform. Please kindly note NOT all Apps are compatible with this platform. If you have any compatibility problem with a 3rd party App, please contact your App provider. For the operation instruction of a certain 3rd party App, please also contact your App provider. We are not responsible for any problem with your 3rd party Apps.
Compatibility This unit is a standard “Double Din” sized radio. Check to see that your vehicle accepts a double din sized radio. This unit conforms to the standard size and dimensions of a double din radio. Your vehicle may require a vehicle speci ic or 3 rd party double din installation kit. Precautions & Warnings Please take a moment to read through this information booklet and heed all precautions to ensure a positive user experience.
System Installation: Before starting: To prevent short circuits, be sure to disconnect the battery terminal before starting. Installation Guide - Double Din Fitting: Caution: 1) This screen opens up. Install the unit within 30 degrees of the horizontal plane. Check that the screen has enough room to fully open. Restricting screen movement will cause damage to the mechanism. 2) Consult your vehicle dealership before making any modi ications to your car’s body (ex.
Installing Steering Wheel Control Note on compatibility: This unit is a dual wire code learning Steering wheel interface, adaptable to any vehicle with existing steering wheel controls. This unit has the ability to wire directly to your vehicle’s steering wheel column and does not, but may, require a 3 party steering wheel control interface. Pyle Audio Technical support can assist you in interfacing into vehicles with existing steering wheel controls.
Volume up Tips: Navi----You might have several maps in this device, by pressing Navi button, you will enter into the map which you set as default in the Navi path, if you want to change the navi path to another map, please go to setting to change it Setting Car setting Navi setting .
Swipe left/right to access more apps Navigation Radio All Apps list BT Settings Navi Loads Navigation software (if you have several maps in this device, you can set the default map. Setting Car setting Navi setting.
Settings 1) Scrolling Use the red bar to scroll through the list of all available options. 2) Turn on/ off Many settings can be toggled on or off in this screen *Note: Factory setup is not adjustable by user. Do not attempt to enter this setup menu. Set Time 1) Time Options You can select using GPS to provide positioning time or using net work-provided time. 2) Date and Time Use the up and down arrows to set the date and time accordingly. 3) Select time zone accordingly.
Calendar Displays the day, month and year. Use forward and back arrows the view past or future months. Selected dates are highlighted in blue Note: Calendar does not allow entry of appointments.
Radio 1) Scanning: Press, hold, and drag the slider to quickly tune the radio. 2) Current Station: The currently selected station will be displayed in the center. Press the forward and back arrows to change the current station. 3) Favorite Stations: Press and hold one of the six preset slots to set and save a selection for later. 1 2 3 USB - Flash Memory File Browsing Plug in lash drives to access music video and photos.
Third Party Apps For the detailed operation instruction for a certain 3rd party App, such as Google map, Youtube etc., please contact your 3rd party App provider for further service.Thank you. Trouble Shooting Q: Unit doesn’t power up A: Use a multi-meter to check for 12v+ to red and yellow wires. Check for proper Ground on the Black wire. Q: My video does not play A: Attach “PARK” wire to parking break.
Trouble Shooting Q: How do I use / set-up RDS? A: (*Traf ic and weather feature only available in Europe) Q: My Bluetooth microphone is not working as expected A: -Check that nothing is covering microphone port.
WIFI ANTENNA 3G/USB/DVR 3G/USB/DVR 3G/USB/DVR BT/MIC SUBWOOFER OUTPUT GPS ANT RADIO ANT A. Video Input B. Video Output 1 C. Video Output 2 D. Left Audio Input E. Front Left Audio Output F. Rear Left Audio Output G. Right Audio Input H. Front Right Audio Output I.
GROUND BACK UP CAMERA Green/White Blue/White Orange Brown Pink Blue Gray/White Black (RCA) Red Yellow Black Orange Brown Purple Green Gray White 13 Radio Antenna Radio antenna receptacle Subwoofer Output Audio / Video Input Audio / Video Output 1 Audio / Video Output 2 SW KEY AMP REMOTE TURN ON ILLUMINATION BACK UP CAMERA PARKING AUTO ANTENNA SW-GROUND CAM VIDEO IN ACC FUSE/ POWER B+ GROUND CANBUS INTERFACE CANBUS INTERFACE Speaker Rear R Speaker Rear L Speaker Front R Speaker Front L Pre amp subwoofe
DVD DVD app will only open if a compatible DVD disc is detected. 1) Scrubbing Press and drag along the time line to quickly skip through DVD times line.
Bluetooth Bluetooth app allows Bluetooth pairing with compatible devices for making calls and music playback. To pair your phone, ensure Bluetooth is enabled in your phone’s system settings and that you are disconnected from all other devices. In the Bluetooth app of your radio, press the “Gear” icon in the left column to access Bluetooth settings. Next, press the “Magnifying glass” icon to set the radio into pair mode.
How to access internet How to access internet? You can have three ways to access internet. 1. Use a 3G dongle Insert USB type 3G dongle to one of the rear USB port, wait for few seconds, then 3G signal icon will be shown on status bar, and you can access internet now. 2. Use your smartphone as hotspot Please turn on your smartphone hotspot, then go to this car Android unit and turn on wi i, ind out your smartphone hotspot and connect it, now you can access internet. 3.
Phone Link Software User Manual This phone link software is developed by a 3rd party Apps developer, which we provided to our valued customers free of charge. As mobile phones manufacturers are keeping on upgrading their system, this device may not be compatible with their upgraded operating system, we will not be responsible for these incompatibility. your kind understanding is highly appreciated. 1.Product introduction 2 2.Product support information 2 2.1.Supported vehicle navigato 2 2.2.
1.Product introduction Easyconnected is a software product which is developed by Wuhan Carbit Information Co., Ltd. and achieves the interconnection between a mobile phone and a vehicle navigator. This product can achieve double screen interconnection between the mobile phone and vehicle navigator by the standard USB interface or Wi-Fi connection manner.
3.Important 3.1.Enable USB debugging Before connecting Easyconnected to Android mobile phone, ensure that [USB Debugging] option of Android mobile phone has been enabled. If you do not know how to enable it, please check [7.1 How to enable USB debugging switch of Android mobile phone]. 3.2.Select USB cable Since there's great difference in the performances of mobile phone data cables on the market, you're strongly recommended to use your original USB data cable of your phone for connection.
4.Legal statement Carefully read and thoroughly understand this Statement before using this software. You may not use this software, while you're considered to accept the whole contents of this Statement if you use it. 1. Please operate this software before the car runs or when the car parks. Do not operate it when the car is running, or else you shall shoulder the responsibility for the safety accidents arising therefrom. 2.
5.2.Connection manner 5.2.1.Android USB connection Enable the USB debugging of mobile phone according to the prompt Connect with USB cable Check and con irm Allow USB Debugging on the mobile phone during connection for the irst time, and check "Always allow to debug with this computer" to facilitate use next time.
Allow to install Phone Link service and Drivemode software on the mobile phone according to the prompts (not required to con irm on some mobile phones). 5.2.2.Android Wi-Fi connection Enable the network share and portable hotspot function of mobile phone, record the name of mobile phone hotspot, and use the mobile phone Wi-Fi as hotspot for vehicle navigator connection. Select the mobile phone hotspot enabled just now from the box on the left side, and enter a password for connection.
Enter connection authentication by USB connection manner for mobile phone connection for the irst time or after mobile phone restart to ensure the connection security. Refer to [Android USB Connection]. Enter the welcome interface of Drivemode successfully, which means successful connection. 5.2.3. IOS Wi-Fi connection Enable the personal hotspot function of mobile phone, record the name of mobile phone hotspot, and use the mobile phone Wi-Fi as hotspot for vehicle navigator connection.
Slide on the screen of mobile phone to open the control bar, click Airplay to select EC-Mirror-**, and then enable mirror switch. Open Drvie mode APP on the phone, if don't have, you can scan QR code and download. 5.3.
6.Setting Enter the setting interface by clicking "Setting" button in the pop-up function menu: Name Function description Autostart When enabling this function, the vehicle navigator, after started, will prompt the user whether to automatically start Easyconnected to enter double screen interaction when detecting the mobile phone connection with USB debugging enabled, or Wi-Fi connection.
7.2.Checklist of connection problems Mobile phone type Android mobile phone iPhone mobile phone Problem Cause analysis Solution USB Debugging icon does not appear on the mobile phone screen Physical USB connection fails. 1. Check whether the mobile phone has enabled [USB Debugging mode] 2. Check and replace USB cable 3. Check the USB interface of vehicle navigator 4.