OWNER’S MANUAL PLL SYNTHESIZER STEREO RADIO WITH COMPACT DISC PLAYER DIGITAL VBD 500
INSTALLATION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
1. Dashboard 1 2. Nut (5mm) 6 3. Spring washer 7 4 2 4. Screw (5 x 25mm) 5 5. Screw 3 6. Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. (Fig. 2) 7. Plain washer Removing the unit 1. Frame 1 2. Insert fingers into the groove in the front of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove downwards and attach it.) 3 3.
USING THE DETACHABLE FRONT PANEL To Detach the Front Panel 1. Press the open button (open), then the front panel will be folded down. Open 2. Remove the front panel by pulling its middle-hand outward. Front Panel 3. For safekeeping, store the front panel in the supplied protective case immediately after being removed. Protective case Front panel 4. Push the front metal plate into the main body. A ‘click’ sound should be heard.
To Reinstall the Front Panel 1. Push the front panel into the main body. A ‘click’ sound should be heard. 2. Note that if the front panel fails to lock in position properly, press control button may not function and LCD display may be missing some segments. Pushing the open button and then reinstall the front panel again. Precautions when Handling 1. Do not drop the front panel. 2. Do not put pressure on the display or control buttons when detaching or reinstalling the front panel. 3.
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR SUBWOOFER CABLE IGNITION RED SWITCH (B+) MEMORY YELLOW BACK-UP BLACK GROUND (B–) (GREEN) (GREY) RCA CABLE Rch RED Lch WHITE POWER ANTENNA FRONT Lch SPEAKER REAR Lch SPEAKER BLUE WHITE GREY WHITE/BLACK GREY/BLACK GREEN VIOLET GREEN/BLACK VIOLET/BLACK 6 FRONT Rch SPEAKER REAR Rch SPEAKER
OPERATION 12 13 7 11 3 2 10 1 19 21 8 22 16 20 26 9 23 15 24 5 6 25 27 14 18 17 4 GENERAL OPERATION • ON/OFF Switch on the unit by pressing any button [except OPEN button (7) and EJECT button (4)]. When system is on, press PWR button (9) to turn off the unit. • FACEPLATE RELEASE Press OPEN button (7) to detach the removable faceplate.
• SOUND ADJUSTMENT Press SEL button (11) to select the desired adjustment mode. The adjustment mode will change in the following order: Volume Bass Treble By pressing VOLUME button (12) or VOLUME adjust the desired sound quality. Balance Fader button (13), it is possible to • LOUDNESS Press LOU/BND button (14) for several seconds to reinforce the bass output and display will show “LOUD”. Press it for several seconds again to release this function.
RADIO OPERATION • BAND SELECTION At tuner mode, press LOU/BND button (14) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 AM • STATION SELECTION Press MAN/SEK button (17) or MAN/SEK button (18) shortly to activate automatic seek function. Press for several seconds until “MANUAL” appeared on the display, the manual tuning mode is selected.
CD OPERATION • SELECT TRACKS Press MAN/SEK button (17) or (18) to move to the previous track or the following track. Track number shows on display. Hold MAN/SEK button (17) or (18) to fast reverse or fast forward. CD play starts from when you release the button. • STOP PLAYING Press PAU button (21) to pause CD player. Press it again to resume play. • REPEAT THE SAME TRACK Press RPT button (23) to continuously repeat the same track. Press again to stop repeat.
REMOTE CONTROL HANDSET 3 1 2 9 4 5 6 8 7 10 13 14 12 11 15 CONTROL & FUNCTION KEYS 1. POWER 2. MOD 3. S (SEL) 4. DSP 5. BND 6. AMS 7. VOL + 8. VOL – 9. TUN/SEK 10. TUN/SEK 11. M1 - M6 12. PAU 13. SCN 14. RPT 15.
SPECIFICATION GENERAL Power Supply Requirements Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 KHz) Maximum Output Power Current Drain : DC 12 Volts, Negative Ground : 178 (W) x 163 (D) x 50 (H) : : : : +10 dB / –10 dB +10 dB / –10 dB 50W x 4 (ch) 15 Ampere CD PLAYER Signal to Noise Ratio Channel Separation Frequency Response : More than 60 dB : More than 60 dB : 20 Hz - 20 KHz RADIO FM 87.5 to 107.9 MHz 10.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom No power. Disc cannot be loaded or ejected. No sound. Cause Solution The car ignition is not on. If the power supply is properly connected to the car accessory terminal, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Presence of CD disc inside the player.
www.lanzar.
