User's Manual

Thank you for purchasing a Bluetooth Dongle USB06M

product and we hope you enjoy using it.

Installation Steps:

1. Uninstall previous version of BlueSoleil. If a previous version

has been installed. Then reboot the PC.

2. Insert the Installation software CD-ROM into the CD-ROM

drive of your computer.

3. Install the program for the adaptor you are now using, If the

Installation program does not start automatically; please

double click the “Setup.exe” file on the CD manually.

4. Then follow the instructions to finish the software installation.

5. Restart the computer. After the BlueSoleil software package

is installed. This is to ensure the installed Bluetooth Device

takes effect.

6. Plug the bluetooth adaptor into a computer USB port.

7. When the computer had been restarted, start the BlueSoleil

application by clicking. (Start-Programs-IVT BlueSoleil-

BlueSoleil)

FCC Statement：

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly

approved by manufacturer could void your authority to operate this

equipment.

PAGE 1
Thank you for purchasing a Bluetooth Dongle USB06M product and we hope you enjoy using it. Installation Steps: 1. Uninstall previous version of BlueSoleil. If a previous version has been installed. Then reboot the PC. 2. Insert the Installation software CD-ROM into the CD-ROM drive of your computer. 3. Install the program for the adaptor you are now using, If the Installation program does not start automatically; please double click the “Setup.exe” file on the CD manually. 4.
PAGE 2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specification Compliant with Bluetooth V4.0(Dual Mode) Supported: Networking/Dial-up Fax/LAN access/Headset Operating systems: Win2000/XP/VISTA Interface: USB 1.1, 2.