User's Manual

ManualsBrandsLANYA ELECTRONIC ManualsAudio EquipmentBluetooth Headset

Bluetooth Headset User Manual Model:BH08 FCC ID:ZG8BH08

1. Introduction :

The Bluetooth headset BH08U allows you the freedom to make and receive calls

while on the move or in the office, after you connect the headset to a compatible

phone that supports Bluetooth wireless technology.

Read this user guide carefully before using the headset. Read also the user guide for

your phone, which provides important safety and maintenance information.

2. Specification:

* Bluetooth Specification v2.1+EDR

* Supports connecting to two phones simultaneously

* Supports Bluetooth Headset and Hands-free Profile (HFP 1.5)

3. Bluetooth wireless technology:

Bluetooth wireless technology makes it possible to connect compatible

communication devices without using cables. A Bluetooth connection does not require

that the phone and the headset be in line of sight, but both devices should be within 10

meters (30feet) of each other. Connections can be subject to interference from

obstructions, such as walls or other electronic devices.

BH08U is compliant with Bluetooth Specification v2.1 supporting Headset profiles

1.1 and Hands-Free Profiles 1.5.

There may be restrictions on using Bluetooth technology in some locations .Check

with your local authorities or service provider.

4. Overview:

The headset contains the following parts as shown in the figure:

Summary of content (6 pages)

PAGE 1
Bluetooth Headset User Manual Model:BH08 FCC ID:ZG8BH08 1. Introduction : The Bluetooth headset BH08U allows you the freedom to make and receive calls while on the move or in the office, after you connect the headset to a compatible phone that supports Bluetooth wireless technology. Read this user guide carefully before using the headset. Read also the user guide for your phone, which provides important safety and maintenance information. 2. Specification: * Bluetooth Specification v2.
PAGE 2
(1)Answer/end key. (2)Led Indicator (red/blue) (3)Microphone (4)Volume up and volume down buttons (5)Ear piece (6)Charger socket (7) Ear Hook Before you start using the headset, you must charge the battery and pair the headset with a compatible phone. 5. Charging the headset: This device has an internal, rechargeable battery which must be fully charged before used for the first time. It takes you about 3 hours to charge the battery full for the first time. During charging, the indicator shows a steady red.
PAGE 3
To switch off, when BH08U is in on state, press and hold the answer/end key for 3seconds until the Red indicator light flashes for 3 times. 7. Pair the headset with a compatible phone: Pairing is the process of establishing encrypted link between BH08U and Bluetooth devices. Step-1 The headset must be powered off before you begin to initiate the paring. Step-2 press and hold the answer/end key for 6 second until the Blue and Red light flash alternatively. The headset is now in paring mode.
PAGE 4
Voice dialing (dialing a number by saying a name): It is possible to make a call directly from the headset using voice recognition. To use this voice dialing function, your mobile phone must provide this option and corresponding voice samples must have been recorded. Step-1 Enable voice recognition function of your mobile and set the mobile to handsfree state.
PAGE 5
its lifetime. If left unused, a fully charged battery will lose its charge over time. Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15℃ and 25℃(59℉ and 77℉). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.
PAGE 6
MPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.