User's Manual

ManualsBrandsLANYA ELECTRONIC ManualsElectronicsBluetooth Car Kit

Introduction:

Thank you for your interest at our Bluetooth Handsfree. This devicet is a

wireless Bluetooth Handsfree based on the Bluetooth technology that allows

you to making and talking calls without touching your mobile phone.

Read this user guide carefully before using the device .Read also the user

guide for your phone, which provides important safety and maintenance

information. Keep the device out of reach of small children.

Bluetooth wireless technology

Bluetooth wireless technology makes it possible to connect compatible

communication devices without using cables. A Bluetooth connection does not

require the devices to be in line of sight, but both devices should be within 10

meters (30feet) of each other. Connections can be subject to interference from

obstructions.

The device is compliant with Bluetooth Specification 2.1.

There may be restrictions on using Bluetooth technology in some

locations .Check with your local authorities or service provider.

Get started

Overview

1--MUTE

2--LED display

Summary of content (5 pages)

PAGE 1
Introduction: Thank you for your interest at our Bluetooth Handsfree. This devicet is a wireless Bluetooth Handsfree based on the Bluetooth technology that allows you to making and talking calls without touching your mobile phone. Read this user guide carefully before using the device .Read also the user guide for your phone, which provides important safety and maintenance information. Keep the device out of reach of small children.
PAGE 2
3-- MIC input 4--Multi-function Button (MFB) 5--Volume + button 6--Volume- button 7—Mini USB 5 PIN for the charging socket 8—speaker Before you start using the device, you must charge the battery and pair the device with a compatible mobile phone. Charger This device is intended to use with the usb cable that is included in the package. Charge the battery This device has a Rechargeable Lithium Polymer Battery 3.7V, 750mAH battery. 1. Connect the device to the PC USB port.
PAGE 3
Pair the device with a compatible phone 1. make sure your device is switched off 2. press and hold the "MFB" until the blue and red light flashes alternately and there is a tone prompt. The device is now in pairing state. 3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 4. Select the device (BCK08A) from the list of found devices. 5. Enter the pass code 0000 to pair and connect the device to your phone.
PAGE 4
Press volume+ or volume - key to increase or to decrease the volume during a call. Mute During a call, press and hold mute button for about 2 second to mute the MIC, the same operation to withdraw from the MIC mute state. LED indicator status: Switch on: the blue LED flash five times.
PAGE 5
FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.