Product Info
Table Of Contents
- 1 Introduction
- 2 Applicable Module
- 3 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 4 Compliant/Allowable Tx Power Settings
- 5 Allowable Antennas to use with the Radio Module
- 6 Antenna Placement inside the Host System and RF Safety
- 7 Simultaneous Transmission with other Integrated or Plug-in Radios
- 8 Module May Not Be Installed by End Users
- 9 Required Labeling on the Outside of the Host
- 10 Required Labeling on the Module
- 11 Required Regulatory Wording for User Manual/Installation Manual
- 12 OEM Integrator Checklist
ITCNFA324 Module Certification
OEM Integrator Instructions
Document Number: ITCNFA324-IG-001
Revision Number: C
`
NOTICE TO PERSONS RECEIVING THIS
DRAWING AND/OR TECHNICAL INFORMATION
INTRINSYC Technologies Corp
. claims proprietary rights to the material disclosed hereon. This drawing and/or technical information is
issued in confidence for engineering information only and may not be reproduced or used to manufacture anything shown or referred to
hereon without direct written permission from INTRINSYC Technologies Corp
. to the user. This drawing and/or technical information is the
property of INTRINSYC Technologies Corp. and is loaned for mutual assistance, to be returned when its purpose has been served.