ITCNFA324 Module Certification OEM Integrator Instructions Document Number: ITCNFA324-IG-001 Revision Number: C ` NOTICE TO PERSONS RECEIVING THIS DRAWING AND/OR TECHNICAL INFORMATION INTRINSYC Technologies Corp. claims proprietary rights to the material disclosed hereon.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 IDENTIFICATION Document Title ITCNFA324 Module Certification Document Number ITCNFA324-IG-001 Version C Date 15-Nov-2018 HISTORY Version A Date Purpose Pages 27-Jul-15 Original Document All B 26-Oct-16 Added additional dipole antenna to Allowable Antennas. Removed reference to the FCC Interference Handbook booklet in section 11.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 Table of Contents 1 Introduction ........................................................................................................................... 1 2 Applicable Module ................................................................................................................
INTRINSYC TECHNOLOGIES CORP. 1 Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 Introduction This document describes the steps that the OEM integrator must follow when designing and manufacturing a system utilizing the ITCNFA324 Module. Failing to follow the instructions in this document may invalidate the FCC certification and authorization of the Module for use in the U.S. and other countries.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 Table 1 Allowed Maximum Gain (dBi) PIFA, Including Antenna Cable Loss 2.4 GHz 5.150-5.350 GHz 5.470-5.850 GHz 3.62 3.08 4.76 Table 2 Allowed Maximum Gain (dBi) Dipole, Including Antenna Cable Loss 2.4 GHz 5.150-5.350 GHz 5.470-5.825 GHz 3.8 5.5 5.5 Table 3 Allowed Maximum Gain (dBi) Chip, Including Antenna Cable Loss 2.4-2.5 GHz 4.9-6.0 GHz 2.68 5.
INTRINSYC TECHNOLOGIES CORP. • • • • Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 When transmitting antennae are installed in the display section of notebook/netbook/laptops, the display section shall not have metallic components and material that can influence or change the operating and RF exposure characteristics of the antennae. The separation between the main and aux antennae must be at least 3 cm.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 installed. The FCC logo below should not be affixed unless the OEM integrator has obtained the necessary Part 15 approval, e.g., self-declaration of conformity. If the host system is approved to FCC Class B digital emissions limits under a grant of certification issued by a TCB, the FCC ID number shown on the grant should be used on the label instead of the FCC logo below.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 Note: The Integrator is expected to translate text into appropriate languages for the European countries into which the product will be marketed or sold.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 11 Required Regulatory Wording for User Manual/Installation Manual The OEM integrator must include text in the user manual meeting the regulators’ requirements. The text below or similar wording should be used. (Text in red font must be replaced.) FCC compliance information This device complies with Part 15 of the FCC Rules.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 Industry Canada notice This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
INTRINSYC TECHNOLOGIES CORP. Title Date Originated Revision: 15-Nov182015 C Doc #: ITCNFA324-IG-001 Date Revised: 15-Nov-2018 European Community (R&TTE) user manual wording and declaration Europe – EU Declaration of Conformity Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE directive of the European Union (1999/5/EC).