User's Manual

ManualsBrandsLANKE XUNTONG TECHNOLOGY ManualsElectronicsBluetooth low energy 4.0 modules

Table Of Contents

PTR5618

PTR5618

Coin-size Ultra Low Power Bluetooth Low Energy

System on Module

Embedded Cortex™ M4F 32 bit processor

The PTR5618 ultra-low power Bluetooth Low Energy/ANT/2.4GHz Proprietary

Multi-protocol modules based on the nRF52832 from Nordic Semiconductor. The module

with an ARM® Cortex™ M4F 32 bit processor, embedded 2.4GHz transceiver, and

integrated antenna, provide a complete solution with no additional RF design, allowing

faster time to market, while simplifying designs, reducing BOM costs, also reduce the

burden of Regulatory approvals to enter the world market. Making you more quickly into

the bluetooth smart application and remove the worries.

Features

 System on Module(SOM) base on Nordic nRF52832

 Bluetooth Low Energy/ANT/2.4GHz Proprietary Multi-protocol support

 Complete Bluetooth Low Energy stack/profiles solution (Bluetooth 4.x and Higher)

 ARM® Cortex™-M4F 32 bit processor, 512 kB flash memory, 64 kB RAM

 11 General Purpose I/O, Configurable mapping Pins, Simple layout of external application

 12-bit/200KSPS ADC, PWM, SPI Master/Slave (8 Mbps)

 Low power comparator, Temperature sensor, Random Number Generator

 Two 2-wire Master/Slave (I2C compatible)

 I2S audio interface, PDM audio interface

 UART (w/ CTS/RTS and DMA)

 20 channel CPU independent Programmable Peripheral Interconnect (PPI)

 Quadrature Demodulator (QDEC)

 128-bit AES HW encryption

 5 x 32bit Timers, 3 x 24bit Real Timer Counters (RTC), Watchdog Timer

 Internal RC Oscillator 32.768 kHz(± 250 ppm).

 No external components required

 Over-the-Air (OTA) firmware updates available

 Ultra small size(smaller than CR2032 coin battery), about 15mmx15mmx1.6mm with Antenna.

Summary of content (6 pages)

PAGE 1
PTR5618 Coin-size Ultra Low Power Bluetooth Low Energy System on Module Embedded Cortex™ M4F 32 bit processor The PTR5618 ultra-low power Bluetooth Low Energy/ANT/2.4GHz Proprietary Multi-protocol modules based on the nRF52832 from Nordic Semiconductor. The module with an ARM® Cortex™ M4F 32 bit processor, embedded 2.
PAGE 2
Typical Applications:               - 2.4 GHz Bluetooth low energy systems - Proprietary 2.
PAGE 3
Block diagram: Pin Description of Module（Top View）: Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Name P0.11 P0.12 P0.13 SWDIO SWDCLK P0.17 P0.18 P0.21 GND VDD P0.26 P0.27 Description Note I/O I/O I/O Debug and flash programming I/O Debug and flash programming I/O I/O I/O Reset/ IO Power Ground Power Supply I/O I/O COPYRIGHT ©2016 ALL RIGHTS RESERVED XunTong Tech Configurable as pin reset. TEL: +86 755 26675941 E-mail: nrf@freqchina.
PAGE 4
13 14 15 P0.28 P0.29 P0.30 I/O I/O I/O ADC IN ADC IN ADC IN Note: An internal 4.7μF bulk capacitor has been included on the module. For those application that with heavy GPIO usage and/or current draw, it is good design practice to add additional bulk capacitance as required for your application. General Purpose I/O: The general purpose I/O is organized as one port enabling access and control of the 32 available GPIO pins through one port.
PAGE 5
PCB Footprint （Top View）: Recommended RF Layout & Ground Plane: The module integrated antenna requires a suitable ground plane to radiate effectively. The area under and extending out from the antenna portion of the module should be kept clear of copper and other metal. The module should be placed at the edge of the PCB with the antenna edge facing out. Reducing the ground plane will reduce the effective radiated power.
PAGE 6
Ordering Information: Part Number Description PTR5618 Bluetooth Low Energy System on Module PTR5618-EVB Evaluation boards for module，with key, LED, I/O extend，sock for coin cell battery. Absolute Maximum Ratings: Symbol VCC_MAX VIO_MAX VIO_MAX TS Parameter Voltage on supply pin Voltage on GPIO pins (VCC > 3.6V) Voltage on GPIO pins (VCC ≤ 3.6V) Storage Temperature Range Min. Max. Unit -0.3 -0.3 -0.3 -40 3.9 3.9 VCC + 0.