MINI USER MANUAL www.laney.co.
MINI USER MANUAL IMPORTANT SAFETY INSTRUCTIONS 1). Read & Retain these Instructions carefully before installing or operating this product. 2). Comply with Warnings: All warnings and instructions for these products should be adhered to. 3). Unpacking: On unpacking your product please check carefully for any signs of damage that may have occurred whilst in transit from the Laney factory to your dealer.
MINI USER MANUAL INTRODUCTION Welcome to your MINI amplifier. Great tone should be available anywhere.....now it is! Battery powered and designed to give you great tone wherever you want it, the MINI is as happy on your desk as it is in your bedroom or backstage. With two great sounding guitar channels the MINI represents an exciting development in the Laney guitar amp range, it features the ground breaking Laney Smart Interface.
MINI USER MANUAL FEATURES 1 - GUITAR: - Mono jack socket – connect your guitar here. Please use a good quality guitar cable. 2 - GAIN: Control the level of gain in the signal. For clean sounds dial in less gain, for more distorted sounds dial in more gain 3 - DRIVE BUTTON: This button engages the drive circuitry in the amplifier for more high gain sounds. 4 - TONE: Sets the overall EQ of the guitar signal. 5 - AUX IN: A 3.
MINI USER MANUAL FEATURES 6 - LSI: Laney Smart Interface socket. This totally unique feature allows you to connect your amp to your smart device; using the Laney LSI cable supplied to access the world of DIGITAL GUITAR. No other amp on the market offers you this facility. With nothing more than your amp, your smart device and an LSI cable you have access to thousands of digital guitar tones at your finger tips. 7 - VOLUME: Controls the overall volume of anything connected to the amplifier.
MINI USER MANUAL SETTING UP TO USE TONEBRIDGE Download the correct version of the TONEBRIDGE APP for your device from your preferred APP provider. When you first open “TONEBRIDGE” the APP checks your device for compatibility and gives it a rating along with some useful information about using the APP on your device. Once this is complete you can make your guitar sound like any of 10,000 songs of your choice! Lets start by setting your MINi up ready to use “TONEBRIDGE”.
MINI USER MANUAL Once you are happy with the mix you can choose whatever song you want and immediately have the authentic tone at your fingertips! The amps controls can be used to further enhance the characteristics of the tone depending on what guitar you choose to use. Should you experience any feedback when using “TONEBRIDGE” you need to adjust the noise gate within “TONEBRIDGE” which can be found in the additional setting tab for the tone that you have loaded.
MINI USER MANUAL INSTALLING BATTERIES If used incorrectly batteries may leak or explode and cause damage or injury, please take the following precautions.
MINI USER MANUAL USING A PSU Your MINI can be powered using the optional extra -12V 0.75A PSU (MINI-LANEYPSU) This is easily fitted between the mains outlet and the amp. When using the amp with the power supply a few precautions should be followed: Only use the DC power supply that is recommended. The use of other DC power supplies may cause damage or other problems. Turn the power switch to OFF and disconnect any other attached devices before plugging in and turning ON the DC Power Supply.
Technical Specifications MINI Guitar Amplifier Product Power 3W Channels 2 Features Gain Tone Drive Aux in (3.5mm) LSI - Laney Smart Interface (3.5mm TRRS lead included) Speaker 3” Full Range Unit Size/mm 120x173x100 (HxWxD) Unit Weight 0.75Kg Carton Size mm 141x181x109 (HxWxD) Packed Weight 0.9 Kg Power Consumption 5W Power 6*AA (LR6/NiMH) or optional 12V dc adaptor Optional Adaptor 12V 0.
TRANSLATIONS
SAFETY INFORMATION