LTE-M Cellular Communication Module Data Sheet Publication: 98-2539 Rev AA © Landis+Gyr 2020 | Proprietary + Confidential
Limitation on Warranties and Liability Information in this document is subject to change without notice. This manual or any part of it thereof may not be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr.
LTE-M Cellular Communication Module Data Sheet LTE-M Cellular Module Overview The LTE-M Cellular communication module incorporates a power supply, cellular modem, ZigBee circuitry, and interface connector for integration into Landis+Gyr electric meters. A U.FL connector is provided to attach a cellular antenna and the ZigBee antenna is incorporated into the PCB. Figure 1.
LTE-M Cellular Communication Module Data Sheet The LTE-M Cellular module is not available as a standalone product. The module assembly contains: • LTE-M Cellular module • External Flex antenna LTE-M Cellular Module Specifications Table 1.
LTE-M Cellular Communication Module Data Sheet Table 2. Electrical, Mechanical and Environmental Category Electrical Mechanical Environmental Specification Details Voltage 11 to 28 VDC Power 5W peak; .8W continuous Size 5.06 x 2.87 x .94 Storage Temperature -40 to +85 Degrees Celsius Operating Temperature -40 to +75 Degrees Celsius Relative Humidity 0 to 95% Relative Humidity non-condensing Table 3. Cellular Modem Specification Details Supported Bands 2, 4, 12, 13, 25 Table 4.
LTE-M Cellular Communication Module Data Sheet LTE-M Cellular Outline The PCB outline is shown below. Figure 2. P CB Outline FCC and Industry Canada Compliance FCC Class B This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
LTE-M Cellular Communication Module Data Sheet WARNING: Changes or modifications to this device not expressly approved by Landis+Gyr could void the user’s authority to operate the equipment. RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
LTE-M Cellular Communication Module Data Sheet radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.