Certification Exhibit FCC ID: R7PEG1R1S6 IC: 5294A-EG1R1S6 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Project Number: 15-0242 Manufacturer: Landis+Gyr Technology, Inc. Model: G5 Integrated FOCUS AXe 5015 B.U.
Draft 10/7/2015 Landis+Gyr Gridstream RF Generation 5 (G5) Integrated FOCUS AXe Endpoint Quick Start Guide Publication: 98-2412 Rev AA LANDIS+GYR CONFIDENTIAL INFORMATION
Draft 10/7/2015 Limitation on Warranties and Liability Information in this document is subject to change without notice. This manual or any part of it thereof may not be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr.
Draft 10/7/2015 Gridstream RF Generation 5 (G5) Integrated FOCUS AXe Endpoint Quick Start Guide Gridstream RF Generation 5 (G5) Integrated FOCUS AXe Endpoint Figure 1 - 1. FOCUS AXe Meter with a G5 Integrated FOCUS AXe Endpoint G5 Integrated FOCUS AXe Endpoint Overview Landis+Gyr FOCUS AXe meters are designed for use in residential and light commercial services. The FOCUS AXe Advanced Function meter is an Active Energy kWh/kW/TOU Meter.
Draft 10/7/2015 Endpoint Quick Start Guide Landis+Gyr features Digital Multiplication Measurement Technique, meets ANSI standards for performance and utilizes ANSI C12.19 protocol. Contact your Landis+Gyr distributors for documentation and details on programming the FOCUS AXe meter. About the LAN ID The LAN ID is a unique identifier for each Landis+Gyr endpoint and it is always displayed in hex values. Landis+Gyr provides the LAN address. You cannot change the LAN ID of an endpoint.
Draft 10/7/2015 Landis+Gyr Endpoint Quick Start Guide • Module, ZigBee and Metrology firmware can be upgraded via the network • Metrology firmware can also be upgraded over the optical port • Normal operation during upgrades (displays blanks momentarily during F/W Flash) • Meter software remotely and locally readable • Remote or local load side voltage test • Self-reads occur at midnight for each register • Support for 12 self reads • 8-channels of load profile • Interval data of 1, 5, 1
Draft 10/7/2015 Endpoint Quick Start Guide Landis+Gyr Time of Use (Battery-free) Landis+Gyr offers the capability of the endpoint to remotely control up to four TOU schedules. The Meter requires Network Time to keep TOU. The endpoint keeps time once acquired from the Network. The meter must be enabled for TOU.
Landis+Gyr Draft 10/7/2015 Endpoint Quick Start Guide personnel and consumers of the capabilities and limitations of HAN technology. ZigBee radio devices will need to be programmed to respond correctly to each pricing event or Time of Use rate from the meter. An in-home display like the ecoMeter, for instance, will request energy and instantaneous demand data every 7 seconds. It will also request price, which will be provided as flat or Time of Use (TOU) depending on how the meter is programmed.
Draft 10/7/2015 Endpoint Quick Start Guide Landis+Gyr The communication module stores a history of up to the last five power outage and restoration event pairs in the event log. The Host can request this data. NOTE: The module is designed with a high temperature protection feature in which the firmware automatically starts draining the super capacitor responsible for outage notification at 65 degrees Celsius.
Draft 10/7/2015 Landis+Gyr Endpoint Quick Start Guide Gridstream RF G5 FOCUS AXe Specifications Table 1. Specifications Category Specification Value or Range FOCUS AXe Compatible Meters Landis+Gyr FOCUS AXe Supported Meter Forms FOCUS AXe-SD Form Class Form Class 1S-120V 100 1S 200 1S-240V 200 2S 200 2S 200 2SE 320 3S-120V 10/20 3S-240V 10/20 3SC-120V 10/20 3SC-240V 10/20 4S 10/20 Voltage 11.4 V-12.6 V DC (from the meter's power supply) Power Max: 4 W; Typical: 0.
Draft 10/7/2015 Endpoint Quick Start Guide Landis+Gyr Table 1. Specifications (Continued) Category Environmental Specification Value or Range General Environmental Outdoor, rain-protected, sunlight-exposed Operating Temperature Range -40 to +85 C (under meter cover Humidity 0 to 95% relative humidity, non-condensing Hazard Identification U WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Landis+Gyr Draft 10/7/2015 Endpoint Quick Start Guide Cet équipement est conforme aux limites FCC d'exposition aux radiations définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 29cm entre le radiateur et votre corps. Cet émetteur ne doit pas être co-implantés ou exploités en conjonction avec une autre antenne ou émetteur. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s).
Draft 10/7/2015 Endpoint Quick Start Guide 12 98-2412 Rev AA Landis+Gyr Quick Start Guide
