Certification Exhibit FCC ID: R7PEC1R1S1 FCC Rule Part: 15.247 ACS Project Number: 12-0278 Manufacturer: Landis+Gyr Technology Inc. Model: Elster Multi-Function Meter Module Manual 5015 B.U.
Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide Publication: 98-1289 Rev AA LANDIS+GYR CONFIDENTIAL INFORMATION
Draft 8/23/2013 Limitation on Warranties and Liability Information in this document is subject to change without notice. This manual or any part of it thereof may not be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr.
Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide Overview The Elster Multi-Function Meter Module (MFMM) is designed to provide active energy (Kilo-Watt hour) and reactive energy (Kilo-Var hour) data from Elster Alpha+ (A2) meters for use in residential and industrial commercial services. Figure 1 - 1.
Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide • Landis+Gyr Antenna Required Software To work with the endpoint, you need at least one of the following software tools and documentation: • UtiliNet Solution Center (USC) • Meter Master Lite software • • Meter Master Lite Quick Start Guide, publication number 98-0071 Elster ALPHA Plus software Landis+Gyr recommends you have RF Verify software and the RF Verify User Guide, publication number 98-0069.
Draft 8/23/2013 Landis+Gyr Elster Multi-Function Meter Module Quick Start Guide Table 1. Elster Label Identification Label Description 2 Landis+Gyr FCC ID Federal Communications Commission (FCC) Identification (ID) number assigned to the Elster Multi-Function Meter Module for use in the Elster Alpha+ meter. 3 Landis+Gyr LAN ID Identifies the Elster Multi-Function Meter Module to the Landis+Gyr billing network (printed and barcoded).
Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide Landis+Gyr Power Outage/Restoration The Multi-Function Meter Module gets Power Fail signal from meter. The communication module saves critical endpoint data to non-volatile memory, creates and sends a configurable number of power fail messages (typically 20) to the host system that include the LAN ID.
Draft 8/23/2013 Landis+Gyr Elster Multi-Function Meter Module Quick Start Guide RF Exposure In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element shall be installed such that a minimum separation distance of 20 centimeters will be maintained. Host FCC Label Requirement In the final installation, the following information must be visible: “Contains FCC ID: R7PEC1R1S1 This device complies with Part 15 of the FCC rules.
Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide Landis+Gyr Product Specifications Table 3. Elster Multi-Function Meter Module Specifications Category Compatible Meters Specification Value or Range Elster ALPHA Plus Supported Meter Forms NOTE: Contact Elster Electricity for additional forms.
Landis+Gyr Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide Table 3. Elster Multi-Function Meter Module Specifications Category Standards Compliance Environmental Specification Value or Range FCC Title 47 CFR Part 15 Subpart B & C Radiated and Conducted Emissions IEC 61000 4-2,3,4,5 Electromagnetic Compatibility ANSI C12.1-2011 Electricity Metering ANSI C12.20-2002 Electricity Meters Standard ANSI C37.90.
Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide Landis+Gyr Physical Dimensions The ALPHA Plus meter fits all standard S-base services. Meters with an A-base are also available. Figure 1 - 1 illustrates the S-base meter type and dimensions. NOTE: The dimensions are for reference purposes only and should not be used for construction. Figure 1 - 1.
Landis+Gyr Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide Figure 1 - 2. A-base Meter Type and Dimensions in Inches (millimeters) - Front and Side View Figure 1 - 3.
Draft 8/23/2013 Elster Multi-Function Meter Module Quick Start Guide 12 98-1289 Rev AA Landis+Gyr Landis+Gyr Confidential Information