SR128 User Manual
SR128 User Manual Rev. A Document History Date 11 Sep 2022 Version A Author Huy Le Change Initial release © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A General Note This document is intended for information purposes. STYL makes every effort to ensure that the quality of the information is available. The content of this documentation is provided on an “as is” basis and may contain deficiencies or inadequacies. STYL disclaims any warranty and all responsibility for the application of the device(s) that is made in relation to the accuracy, reliability or contents of this document.
SR128 User Manual Rev. A Contents 1. 1.1. 2. 2.1. 2.2. 2.2.1. 2.2.2. 2.2.3. 2.3. 2.3.1. 2.3.2. 3. 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.7. 4. 5. 6. 6.1. 6.2. 6.3. 6.4. 6.5. 7. Introduction ..................................................................................................................................... 5 Abbreviations ................................................................................................................................... 5 Contactless Product Construction .........
SR128 User Manual Rev. A 1. Introduction The Contactless Product consists of PCD module, also known as SIRIUS contactless reader SR128, integrated with a 7” LCD display. The PCD module uses the latest NXP front end NFC IC PN5190 for improved RF performance to meet latest EMVCo L1 and L2 VISA/MasterCard specifications. Its antenna is integrated around the PID making the display as the touch point for validating the Fare Media.
SR128 User Manual Rev. A 2. Contactless Product Construction This section describes the construction of the Contactless Product. 2.1. Overview The Contactless Product comprises of the following main components: a) LCD module b) PCD module – Application Processor board, SAM board and Antenna/Reader board Figure 1. System overview © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A 2.2. PCD Module 2.2.1. PCD-APP board interfaces Figure 2. Connector USB-C1 Connector B2B connector PCD-APP board PCB with main connector pinout Table 1. PCD-APP board PCB main connectors Function USB interface to HOST Support USB 2.0 data only APP board to SAM board connection © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A 2.2.2. PCD-SAM board interfaces Figure 3. PCD-SAM board PCB main connector © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Figure 4. Rev. A PCD-HOST 10 Pins - main connector pin out configuration Connector USB-C2 Connector Table 2. PCD-APP board PCB main connectors Function USB interface for reader operating in PCSC/CCID mode B2B connector PCD-Host 10-pin conn PCD-Reader Antenna conn For expansion to 8 SAM Reader power input and RS232/485 connectivity to HOST Connection to Antenna © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A 2.2.3. PCD-Antenna board interfaces Figure 5. Table 3. Connector PCD-Reader Antenna conn PCD-Reader-Antenna board PCB PCD-READER ANTENNA board PCB main connector Function Antenna connection to reader © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A 2.3. Assembly 2.3.1. Contactless Product Assembly Figure 6. Figure 7. Top view Bottom view © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A 2.3.2. Physical dimension Figure 8. Figure 9. Physical dimension without cables Physical dimension with cables © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A 3. Specifications 3.1. Operating Conditions No. 1 2 3 Specification Temperature Temperature Humidity Type Min. Operating -10 -20 Storage 0 Relative Typ. - Max. +60 +85 95 Unit o C o C % Remarks non-condensing 3.2. Power Supply No. Specification 1 10 Pin Connector 2 USB C1 Type Min. Voltage Current Voltage - USB C2 Max. 650 900 Unit VDC mA VDC mA 5 500 1500 900 mA VDC mA Current Voltage 3 Typ. 12 5 500 - Current Remarks 500mA (for USB2.
SR128 User Manual No. 3 Specification Baud-rate Description 106kbps, 212kbps, 424kbps, 848kbps 4 5 Card type supported Communication Range All ISO 14443-X contactless cards CPU-based card: up to 8.5cm Memory-based card: up to 10cm Rev. A 3.6. Data Communication Interface No. 1 2 Specification USB interface Serial interface Description USB Type C RS232/422/485 Baud-rate configurable 9600, 19200, 115200 and 230400 kbps 3.7. Standards & Certification No.
SR128 User Manual Rev. A 4. Reader Connection The SR128 reader interfaces with the host via the 10pin serial and power connection when operating hostreader configuration. SR128 Reader SAM Board 12 VDC Host RS232/RS485 APP Board 10 -Pin Interface (RS232/RS485) Antenna Board Assembly USB C2 Interface In PCSC/CCID mode, the host can connect to the reader using the USB-C2 interface. The reader will present itself as a standard PCSC reader to the Operating System.
SR128 User Manual Rev. A 5. Installing and Replacing SAM card Figure 10. SAM cards position in bottom view • Installing and Uninstalling SAM card Step 1: Push the metal lock of the sim towards the arrow Step 2: Open the cover and insert the SAM card inside and then close the cover and wipe the metal lock towards the arrow © Copyright 2022 STYL Solution Pte., Ltd.
SR128 User Manual Rev. A Step 4: Reversed the Step to take out the SAM Card. 6. Operational Precautions 6.1. General Safety Instructions The SR128 reader contains ESD sensitive components. When handling with the device, avoid in contact with components especially the ICs on the boards. The operating voltage of the SR128 reader has 12VDC. The 10pin connector accepts 12VDC. Operating the SR128 reader other than the rated voltage will experience performance deterioration or damage the reader. 6.2.
SR128 User Manual Rev. A 6.3. Reader Status Indicators There are LED indicators and DC Buzzer located on Reader module APP/SAM boards for various Reader status indicators.
SR128 User Manual Rev. A 6.4. Battery Safety Information CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS a. Use only CR1220, BATTERY LITHIUM COIN 3V 20MM. Observe the following guidelines for safe use of Li Ion batteries. b. Do not expose the battery to excessive heat or cold. Do not short-circuit. It may explode. c. To avoid risk of fire, burn or damage to your battery, do not allow a metal object to touch battery contacts. d.
SR128 User Manual Rev. A Important: Caution: Any changes or modifications not expressly approved by the party responsible for compliance to this equipment would void the user’s authority to operate this device. © Copyright 2022 STYL Solution Pte., Ltd.
