Owner manual

ManualsBrandsLand of Nod ManualsFurnitureCube Collection 3 Cube Bench

WARNING: Adult Assembly Required

CUBE

3-CUBE BENCH

Made in Thailand - r07 Page 1 of 4

HARDWARE

COMPONENTS

Thank you for purchasing the 3 Cube Bench. This page

lists all the contents included in the box. Please take the

time

to identify the hardware as well as the individual

components

to this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com

A. With the assistance of another adult, place top

and bottom panel onto a clean, padded surface

as shown. Insert 4 wood dowels and 2 cam

screws into top panel as shown. Secure, but do

not over tighten, each cam screw using a phillips

head screwdriver.

B. Insert 4 wood dowels into bottom panel as

shown.

8 - flat

washers

8 - spring

washers

1 - top panel

1- bottom panel

2 - side panels

(1 left, 1 right)

1 - support2 - partitions

1 - back

panel

top

panel

Missing hardware? Please call 800.933.9904 for replacements.

NOTE: Contains small parts. Keep away from small children.

TOOLS REQUIRED

18 - wood

dowels

phillips head screwdriver allen wrench (included)

(We recommend the use of hand tools instead of power tools)

18 - small

screws

6 - large

screws

8 - bolts

2 - cams2 - cam

screws

bottom

panel

NOTE: Do not over

tighten the cam screws

Summary of content (4 pages)

PAGE 1
CU BE 3-CUBE BENCH HARDWARE 18 - wood dowels 18 - small screws 6 - large screws 8 - bolts 2 - cam screws 2 - cams 8 - spring washers 8 - flat washers Missing hardware? Please call 800.933.9904 for replacements. NOTE: Contains small parts. Keep away from small children. Thank you for purchasing the 3 Cube Bench. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
CU BE 3-CUBE BENCH NOTE: Make sure arrow points toward nearest edge with holes A partition partition B top panel side panel 2 A. Insert 1 cam into each partition as shown. Make sure arrow of cam points toward nearest edge with holes. B. Insert 4 wood dowels into each side panel as shown. 3 Fit dowels of top panel into corresponding holes of partitions as shown. Using a screwdriver, turn each cam until it securely engages the cam screw.
PAGE 3
CU BE 3-CUBE BENCH NOTE: Do not over tighten the bolts right side panel 6 Fit dowels of left and right side panels into corresponding holes of assembled unit as shown. Secure each side with 4 bolts, 4 spring washers and 4 flat washers using an allen wrench. Do not over tighten the bolts. left side panel NOTE: Make sure slots of back panel are positioned on top during assembly Cleaning and Care Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
CU BE 3-CUBE BENCH OPTIONAL CUSHION ASSEMBLY 3 cube cushion (sold separately) Velcro strap back panel slot 3 CUBE CUSHION ASSEMBLY 8 Made in Thailand - r06 Unfasten Velcro straps on cushion. Place cushion (sold separately) onto top of 3 Cube Bench as shown. Loop Velcro straps through the front edge of the top panel and into the back panel slots. Fasten Velcro straps to secure cushion. Customer Service 800.933.9904 | Latest instructions available at www.landofnod.