User Instructions

ManualsBrandsLAKSHMI INTERNATIONAL ManualsAudio Equipment2 in 1 Portable Earbuds

2 in 1 Portable Earbuds

LK807

1，TWS Earbuds Technical Parameters

Wireless version: wireless V5.0

Transmission distance: 10M

Battery: 30mAh

Charging voltage: 3.7V

Support profile: A2DP/HFP/HSP/AVRCP

2. Speaker Technical Parameters

Battery: 3.7V 1500mah

Frequency response:120HZ-18KHZ

Speaker Power: 4Ω/5W

Size: L46mm*W46mm*H12

6.5mm

Weight: 170 g

Key instructions:

Power charging

Power bank

Speaker power control

Speaker battery indicator

Earbuds control

Earbuds indicator

Summary of content (4 pages)

PAGE 1
2 in 1 Portable Earbuds LK807 1，TWS Earbuds Technical Parameters Wireless version: wireless V5.0 Transmission distance: 10M Battery: 30mAh Charging voltage: 3.7V Support profile: A2DP/HFP/HSP/AVRCP 2. Speaker Technical Parameters Battery: 3.7V 1500mah Frequency response:120HZ-18KHZ Speaker Power: 4Ω/5W Size: L46mm*W46mm*H126.
PAGE 2
1. Earbuds pair automatically A. TWS earbuds will turn on automatically when pick out earbuds from the charging case with speaker power off. B. Earbuds will connect with another one to be TWS mode after turning on with voice prompt. C. Turn on the BT on your device, you can search for your pairing name LK807 from your wireless device to wirelessly connect to your earbud. You will hear “Connected” when pairing is complete. 2. Earbuds pair by hand A.
PAGE 3
C. Select “LK807” from the list of found/available devices. 3. Speaker case charging A. Put the earbuds into the case for charging automatically, the red light of the earbud is on when charging, and the light will be off when fully charged. B. Press the speaker button for battery power indication. C. Press the power button about 4 seconds to turn ON/OFF the speaker, it will be switched to speaker mode if you put earbuds back into the charging case. Touch key function: A.
PAGE 4
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.