Compenser™ Parts List Parts List The packing unit should include the following items: ➀ ➁ ➂ ➃ ➄ Compenser™ Cable for Connection to Hands-Free-Car Kit (5m/16.5ft.
Safety Precautions Compenser™ Safety Precautions Improper Installation: The installation of the COMPENSER™ requires special knowledge, abilities and tools. Improper installation may cause damage to the unit or to the vehicle! We therefore strongly recommend having the installation done by a professional installer.
Compenser™ Safety Precautions Damage of Car Components: Drilling holes or using self-tapping screws when mounting the COMPENSER™ may cause damage to important vehicle components or to the wiring. Make sure there is enough space left behind drilling holes and screws! Effects on the Car's Electrical System: Although the COMPENSER™ has been designed for minimum radiation levels, improper installation of components of the system may influence the electronic equipment of the vehicle.
Functional Description Compenser™ Functional Description The COMPENSER™ is a bi-directional transmitting and receiving booster which compensates for all cable and plug losses which occur in the signal path between the mobile phone and the external antenna. This provides optimum call quality through optimized transmitting and receiving characteristics. The COMPENSER™ is ready for operation when the vehicle's ignition is turned on.
Compenser™ Installation Guide Installation Guide The following installation instructions are not meant to be a guide for self installation, rather than a supporting document for the professional installer. Should you decide to install the COMPENSER™ yourself, which will void the RAYTEL LLC Limited Warranty, please read and follow the installation instructions very carefully and strictly observe all safety precautions.
Installation Guide Compenser™ RAYTEL LLC recommends the use of its Mobile Phone Antenna which will fit to the antenna cable adapter of the COMPENSER™. Should you decide to use an existing mobile phone antenna of another brand, you may have to use an Antenna Adapter.
Compenser™ Installation Guide The COMPENSER™ may only be opened by authorized specialized workshops. The guarantee is void if opened by any other person. If you require service, please ask your specialized dealer or contact our customer and product support department. Preparations First decide on where to install the COMPENSER™, taking into consideration the safety criteria, and fitting it as close as possible to the antenna.
Installation Guide Compenser™ Figure 3 Installation Risk of injury: Unsuitable installation locations can cause injuries during a traffic accident or render safety devices ineffective. Do not install the COMPENSER™ in the airbag's action area. Disconnecting the minus pole in the car battery The minus pole in the car battery must always be disconnected during work on terminals in the vehicle's electrical system. It is recommended to disconnect the minus pole during the entire installation.
Compenser™ Operating the COMPENSER™ The COMPENSER™ will be installed as shown in Figure 3. First lay the (5m/16.5ft) RF cable type RG58, inserted between the mobile phone holder / hands-free kit and the COMPENSER™. Tighten the plug on both sides torque : 1 Nm/0.7ft./lb.. The telephone connection ( ) on the COMPENSER™ is to be used for this purpose. Then plug the adapter (10cm/4in. RF cable) to the antenna connection on the COMPENSER™ ( ).
Declaration of Conformity Compenser™ Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Support Customer support and product assistance is available by e-mail: support@tellphone.com.
Compenser™ Drilling Template Drilling Template -15-
TM Visit us at www.raytel-llc.com © RAYTEL LLC. All rights reserved. RAYTEL™ and Tellphone™ are trademarks of RAYTEL LLC. Compenser™ is a Registered Trademark of Funkwerk Dabendorf GmbH. Printed in Germany.
