Product Info

ManualsBrandsLaird Connectivity ManualsElectronicsLow Power RM024

https://www.lairdconnect.com/

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852-2762-4823

RM024

Regulatory Information v1.6

1 CURRENT REGULATORY CERTIFICATIONS

The RM024 holds current certifications in the following countries:

Country/Region

Regulatory ID

USA (FCC)

KQL-RM024

KQL-RM02410

N/A

UK (UKCA)

N/A

Canada (ISED)

2268C-RM024

2268C-RM02410

Japan (MIC)

RM024-P10-C: 204-820089

Taiwan (NCC)

N/A

Korea (KC)

R-C-LAI-RM024-S10-C

Australia

N/A

New Zealand

N/A

Russia

N/A

2 CERTIFIED ANTENNAS

The antennas listed below were tested for use with the RM024. The OEM can choose a different manufacturer’s antenna but

must make sure it is of same type and that the gain is less than or equal to the antenna that is approved for use.*

*Note: Japan (MIC) lists applicable antennas on its certificates. If your antenna is not on the approved list, regardless of

whether it is comparative, it must be added to the certificate before it can be used in Japan.

Manufacturer

Manufacturer Part

Number

Laird Connectivity Part

Number

Type

Gain (dBi)

Laird Connectivity

WIC2450-A

0600-00042

Chip

Laird Connectivity

NZH2400-MMCX

2150-00006

Microstrip

Laird Connectivity

001-0014

FlexPIFA

Nearson

S181FL-6-PX-2450S

0600-00040

Dipole

Laird Connectivity

MAF94045

PCB Trace

Summary of content (13 pages)

PAGE 1
RM024 Regulatory Information 1 v1.
PAGE 2
RM024 Regulatory Information 3 FCC REGULATORY Product Family 3.1 US/FCC RM024 (125mW) KQL-RM024 RM024 (10mW) KQL-RM02410 RM024 Family Part Number * Form Factor Tx Output Antenna RM024-S125-C-XX Surface Mount 125 mW U.FL RM024-P125-C-XX Pluggable 125 mW U.FL RM024-S10-C-XX Surface Mount 10 mW U.FL RM024-P10-C-XX Pluggable 10 mW U.FL * The last two slots (XX) in the Part Number column are used for custom setups. They can be values ranging from 01-99, aa-zz.
PAGE 3
RM024 Regulatory Information 3.3 FCC Documentation Requirements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
RM024 Regulatory Information 4 ISED (CANADA) STATEMENT 4.1 Industry Canada Statement Product Family Canada/IC RM024 (125mW) 2268C-RM024 RM024 (10mW) 2268C-RM02410 The end user manual shall include all required regulatory information/warning as shown in this manual. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference; and 2.
PAGE 5
RM024 Regulatory Information NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
PAGE 6
RM024 Regulatory Information 5 MIC (JAPAN) CERTIFICATION The following are the applicable MIC certificates and IDs (Table) 5.1 MIC Associated Products 204-820089 RM024-P10-C Antenna Information The RM024 series was tested with antennas listed below. Note: Japan (MIC) lists applicable antennas on its certificates. If your antenna is not on the approved list, regardless of whether it is comparative, it must be added to the certificate before it can be used in Japan.
PAGE 7
RM024 Regulatory Information 6 KOREA (KC) REGULATORY The RM024-S10-C is approved for use in the Korean market. Model Certificate Number RM024 R-C-LAI-RM024-S10-C R-C-LAI-RM024-S10-C 7 AUSTRALIA AND NEW ZEALAND REGULATORY RCM: Pending Compliant to standards EN 300 328 V1.9.1, AS/NZS 4268: 2012-A1:2013, and EN 55022:2010/AC:2011 If this device is used in a product, the OEM has responsibility to verify compliance of the final end product to the Australia/New Zealand (RCM) Standards.
PAGE 8
RM024 Regulatory Information 9 UK (UKCA) REGULATORY Manufacturer Laird Connectivity Products Model: RM024 Part Numbers: DVK-RM024-CE RM024-P10-C RM024-S10-C RM024-S10-M Product Description 2.
PAGE 9
RM024 Regulatory Information 10 EU REGULATORY Part Number * RM024-S10-C-XX RM024-S10-M-XX RM024-P10-C-XX Form Factor Surface Mount Surface Mount Pluggable Tx Output 10 mW 10 mW 10 mW Antenna U.FL U.FL or Chip U.FL * The last two slots (XX) in the Part Number column are used for custom setups. They can be values ranging from 01-99, aa-zz. Currently, these values are -30, for FW version 3.0. 10.
PAGE 10
RM024 Regulatory Information ▪ EU 2015/863 (RoHS 3) Declaration of Compliance – EU Directive 2015/863; Reduction of Hazardous Substances (RoHS) This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
PAGE 11
RM024 Regulatory Information Norsk [Norwegian] Herved [navnet på produsenten], erklærer at denne [type utstyr] enheten, er i samsvar med de grunnleggende kravene og andre relevante bestemmelser i direktivene 2014/53/EU Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/UE.
PAGE 12
RM024 Regulatory Information 10.2.1 EU Declaration of Conformity Manufacturer Laird Connectivity Products Model: RM024 Part Numbers: DVK-RM024-CE RM024-P10-C RM024-S10-C RM024-S10-M Product Description 2.4 GHz Radio Modules EU Directives 2014/53/EU – Radio Equipment Directive (RED) Reference standards used for presumption of conformity: Article Number Requirement Reference standard(s) 3.1a Low voltage equipment safety EN 62368-1:2014+A11:2017 3.
PAGE 13
RM024 Regulatory Information 11 REGULATORY DOMAIN SUPPORT Domain support but not currently certified for – TBD 12 REVISION HISTORY Version Date 1.0 21 Feb 2021 1.1 Contributor(s) Approver Initial version Sue White Jonathan Kaye 10 Jun 2021 Added ISED ICES-003 Issue 7 compliance declaration Sue White Brian Petted 1.2 23 Nov 2021 Added UKCA regulatory information Sue White Brian Petted 1.3 15 Feb 2022 Updated FCC / ISED for 10/125mW Jonathan Kaye Brian Petted 1.