User's Guide

ManualsBrandsLaird Connectivity ManualsElectronicsLC840PA

https://www.lairdconnect.com/ 1

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0610

LC840PA

Regulatory Information v1.3

1 CURRENT REGULATORY CERTIFICATIONS

The LC840PA holds current certifications in the following countries:

Country/Region Regulatory ID

USA (FCC) SQG-LC840PA

Canada (ISED) 3147A-LC840PA

2 CERTIFIED ANTENNAS

The antennas listed below were tested for use with the LC840PA. The OEM can choose a different manufacturer’s antenna

but must make sure it is of same type and that the gain is less than or equal to the antenna that is approved for use.

Manufacturer Model

Laird Connectivity

Part Number

Type Connector

Maximum

Gain

Laird Connectivity NanoBlue EBL2400A1-10MH4L PCB dipole IPEX MHF4 2.0

Laird Connectivity FlexPIFA 001-0022 PIFA IPEX MHF4 2.0

Laird Connectivity 2.4 GHz dipole 001-0001 Dipole RP-SMA male 2.0

Mag.Layers EDA-8709-2G4C1-B27-CY 0600-00057 Dipole IPEX MHF4 2.0

Laird Connectivity mFlexPIFA EFA2400A3S-10MH4L PIFA IPEX MHF4 2.0

Laird Connectivity NFC 0600-00061 NFC N/A -

Laird Connectivity BL654 PCB printed antenna N/A Printed PCB N/A 0.0

3 DOCUMENTATION REQUIREMENTS

To ensure regulatory compliance, when integrating the LC840PA into a host device, it is necessary to meet the documentation

requirements set forth by the applicable regulatory agencies. The following sections (FCC and ISED Canada) outline the

information that may be included in the user’s guide and external labels for the host devices into which the LC840PA is

integrated.

Applicable FCC rules to module - FCC Part 15.247

Summary of content (6 pages)

PAGE 1
LC840PA Regulatory Information 1 v1.3 CURRENT REGULATORY CERTIFICATIONS The LC840PA holds current certifications in the following countries: Country/Region Regulatory ID USA (FCC) SQG-LC840PA Canada (ISED) 3147A-LC840PA Applicable FCC rules to module - FCC Part 15.247 2 CERTIFIED ANTENNAS The antennas listed below were tested for use with the LC840PA.
PAGE 2
LC840PA Regulatory Information 4 FCC REGULATORY Model US/FCC LC840PA SQG-LC840PA The 453-00087 and the 453-00088 hold full modular approvals. The OEM must follow the regulatory guidelines and warnings listed below to inherit the modular approval. 4.
PAGE 3
LC840PA Regulatory Information Consult the dealer or an experienced radio/TV technician for help.  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2.
PAGE 4
LC840PA Regulatory Information Manufacturer Model Laird Connectivity Part Number Type Connector Maximum Gain Laird Connectivity NanoBlue EBL2400A1-10MH4L PCB dipole IPEX MHF4 2.0 Laird Connectivity FlexPIFA 001-0022 PIFA IPEX MHF4 2.0 Laird Connectivity 2.4 GHz dipole 001-0001 Dipole RP-SMA male 2.0 Mag.Layers EDA-8709-2G4C1B27-CY 0600-00057 Dipole IPEX MHF4 2.0 Laird Connectivity mFlexPIFA EFA2400A3S-10MH4L PIFA IPEX MHF4 2.
PAGE 5
LC840PA Regulatory Information IMPORTANT NOTE: If this condition cannot be met (for example, certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator is responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
PAGE 6
LC840PA Regulatory Information 7 REVISION HISTORY Version Date Contributor(s) Approver 1.0 22 Sept 2021 Initial version Raj Khatri, Henry Wagner Brian Petted 1.1 19 Oct 2021 Corrected typos, updated FCCID Henry Wagner Brian Petted 1.2 15 Dec 2021 Corrected typos, updated minimum. Exposure distance in ISED statement Henry Wagner 1.3 20 Dec 2021 Updated FCC radiation exposure statement Henry Wagner https://www.lairdconnect.