EN FR CAN CPU Module Important Product Information www.laerdal.
English CAN CPU Module Important Information Warnings and Cautions A Warning states a condition, hazard, or unsafe practice that can result in serious personal injury or death. A Caution states a condition, hazard, or unsafe practice that can result in minor personal injury or damage to the manikin. Notes Important information about the product or its operation.
English CAN CPU Module Important Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Français CAN CPU Module Informations importantes Avertissements et mises en garde Un avertissement identifie les conditions, les risques ou les mauvaises pratiques pouvant blesser gravement une personne ou provoquer sa mort. Une mise en garde identifie les conditions, les risques ou les mauvaises pratiques pouvant blesser des personnes ou endommager le mannequin. Notes Informations importantes relatives au produit ou à son utilisation.
Français CAN CPU Module Informations importantes Cet équipement a été testé et déclaré conforme aux limites pour appareils numériques de classe B, conformément à l'article 15 de la réglementation de la FCC. Ces limites visent à assurer une protection raisonnable contre les interférences dans une installation résidentielle. Cet appareil génère, utilise et peut émettre une énergie radioélectrique.
OEM integration instructions: This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the external antenna(s) that has been originally tested and certified with this module.
This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 25 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
Manufacturer: Laerdal Medical AS P.O. Box 377 Tanke Svilandsgate 30, 4002 Stavanger, Norway T: (+47) 51 51 17 00 Printed in Norway www.laerdal.com 20-1148X Rev A © 2017 Laerdal Medical AS. All rights reserved.
