Alarm Clock Charging Station with 2 USB Charging Ports For online video support: http://bit.
Table of Contents LCD Features ......................................................................... 1 Setup .................................................................................... 1 Buttons ................................................................................. 2 Settings ................................................................................. 2 Nap Feature ........................................................................... 3 USB Charging Ports ..................
Buttons Z PLUS MINUS ALARM NAP SET Z SNZ/LIGHT Settings • Hold the SET button to enter the settings menu. • Press the +/- buttons to adjust the values. • Press the SET button to confirm adjustments and move to the next item. • Press the SNZ/LIGHT button at any time to exit. Setting menu order: 1. Language (English or Spanish) 2. Beep ON/OFF 3. Hour 4. Minutes 5. Year 6. Month 7. Date 8. Fahrenheit/Celsius 9. Snooze duration (5 minutes-120 minutes) Begin: Hold the SET button for 3 seconds.
Month Year Date Fahrenheit | Celsius Snooze Duration Nap Feature Set the nap duration one time, then, a simple press of the NAP button starts the nap countdown. Set Nap Duration: 1. Hold the NAP button for 3 seconds. NAP and the nap duration will show (default is 10 minutes). 2. Use the +/- buttons to select a nap duration (up to 120 minutes). 3. Press the NAP button to confirm and start nap count down to zero. 4. Press the SNZ/LIGHT button at any time to exit nap setting menu.
USB Charging Ports USB Output: 1 Amp output from each port. • Charge devices that self-regulate. • Do not charge multiple devices from the same USB port. • Must operate clock with power cable to charge other devices. • Plug your device into one of the USB ports. • The clock will show HELLO for 3 seconds. • The lightning bolt will flash while charging. • When no device is connected, no battery will show.
Time Alarm Note: Setting and activating the alarm are separate functions. Set Alarm: 1. Press and release the ALARM button to view alarm time. 2. With alarm time showing, hold the ALARM button for 3 seconds to enter alarm time set mode. 3. Press the +/- buttons to adjust the alarm hour. 4. Press the ALARM button to confirm and move to the minutes. 5. Press the +/- buttons to adjust the alarm minutes. 6. Press the ALARM button to confirm and move to alarm type. 7.
Activate/Deactivate Alarm • When you finish settings, the alarm is active. • From the normal time display, press and release the ALARM button to view alarm. • Press and release the ALARM button to deactivate or to activate the alarm. • When active the alarm clock icon will show. • The clock icon will not show if the alarm is not active. Snooze • When the alarm sounds, press the SNZ/LIGHT button. The alarm will be silent for the preselected snooze duration.
Care and Maintenance • • • • • • • • Do not mix old and new batteries. Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries. Always purchase the correct size and grade of battery most suitable for intended use. Replace all batteries of a set at the same time. Clean the battery contacts and also those of the device prior to battery installation. Ensure the batteries are installed with correct polarity (+ and -). Remove batteries from equipment when it is not used for an extended period of time.