USER MANUAL PC DVD Playback Card October 1998 A-120-0034 Version 1.
W9922PF PC DVD Playback Card The information in this document is subject to change without notice FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
W9922PF PC DVD Playback Card TABLE OF CONTENTS 1. DESCRIPTION .................................................................................................3 1.1. FEATURES .................................................................................................................................... 3 1.2. SYSTEM REQUIREMENTS .............................................................................................................. 3 1.3. CARD FIGURE .............................................
W9922PF 1. PC DVD Playback Card DESCRIPTION This is a new PC DVD Playback Card that provides at low cost, high integration system for playback of MPEG-2, Dolby video and audio bitstreams in Windows-based personal computers. Our PC DVD Playback card not only meets the new demands of advanced PC audio and video applications but also enables the integration of a complete multimedia subsystem. It has software support for games, DVD and Video-CD movies in Microsoft® Windows® operating systems. 1.1.
W9922PF 1.3. PC DVD Playback Card Card Figure P1 DAC & MUX Winbond SDRAM W9951TF VGA Monitor Connector (to VGA Monitor) P2 VGA LOOP Back Con. (to VGA Card) TV Encoder J1 MPEG-II Winbond W9922PF Composite VIDEO Output Con. TV-SET J2 S-VIDEO Output Con. lllllllllllllllllllllllllllllllll lllllll Winbond Chipset W9922PF Figure - 1 1.4.
W9922PF 2. PC DVD Playback Card HARDWARE INSTALLATION 2.1. Package Contents Before you start to install your PC DVD Playback Card you should check that the package is complete. It should contain the following items: • • 1 LAB DVD Decoder CARD 1 Installation CD-title CABLE: • 1 VGA Loop Back Cable 2.2. Handling the DVD Decoder Card WARNING: Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready to work with it.
W9922PF PC DVD Playback Card 7.) Insert the card into the PCI/AGP expansion slot. Press down gently on the top edges of the board to ensure that all connecting points are seated securely. Anchor the board’s mounting bracket using the screw removed earlier. 8.) Replace the cover of your PC and reconnect the power cord. NOTE: If you install a DVD-ROM drive at the same time as the PC DVD Playback Card, remember to attach the CD-Audio cable from the DVD-ROM drive to your sound card.
W9922PF PC DVD Playback Card 2.3.2. TV Connections There are two methods of connecting your PC DVD Playback Card to a television set: S-Video by using a standard S-Video cable, or Composite Video by using a standard Composite Video cable. A) S-VIDEO Output Connector J2 The S-Video Output connector on the PC DVD Playback Card is a 4-pin female S-Video connector, which can be connected directly to a TV using a standard S-Video cable. The S-Video Out connector provides better picture quality.
W9922PF B) PC DVD Playback Card Composite VIDEO Output Connector J1 If your television set does not support an S-Video input port, you may connect it to the PC DVD Playback Card by using a Composite Video cable. Composite Video is more common and works with most televisions. Figure - 4 Installation: Step 1. Plug the COMPOSITE VIDEO Cable into the RCA Jack J1 on the PC DVD Playback Card and the other side into the Composite VIDEO Input port of your TV set.
W9922PF 3. PC DVD Playback Card SOFTWARE INSTALLATION 3.1. Software Contents There is one CD title which comes with this package, labeled: PC DVD Player DRIVER & APPLICATION” This CD title includes the device drivers and application software for the Microsoft® Windows® 95 operating system. 3.2. Device Driver and Application Installation Under Windows® 95 3.2.1.
W9922PF PC DVD Playback Card 4.) The next “Update Device Driver Wizard” window will inform you that Windows was unable to locate a driver for your device. Please click on the other Locations...” push button. 5.) Please type the path of the device driver files into the command line of the “Select Other Location” dialog box. Assuming your CD-ROM drive is D, type the command D:\DRV and click on the “OK” push button.
W9922PF 6.) PC DVD Playback Card This “Update Device Driver Wizard” dialog box will show you the updated driver for your “Winbond DVD Decoder” device. If you want to accept this driver click now on the “Finish” push button.
W9922PF PC DVD Playback Card 3.2.2. Application Software Installation Under Windows® 95 If you want to install the application software for your PC DVD Playback Card onto your PC system, please do the following: 1.) First start up your Microsoftâ Windowsâ 95 operating system. 2.) Then click on the START button and select the RUN item. 3.) Insert your CD-title, labeled PC DVD Player DRIVER & APPLICATION”, into your CD-ROM drive D or E. Assuming your CD-ROM drive is D, type D:\DRV\SETUP.
W9922PF PC DVD Playback Card 5.) The WinMPEG-II Installation” dialog box will appear as shown below. Please read the text carefully and click on the “Next>” push button. 6.) The next “WinMPEG-2 Installation” dialog box appears. You are asked to select the destination directory. You may accept the default directory C:\Program Files\WinMPEG2 and click on the “Next>” push button or you can choose a directory you prefer by clicking on the “Browse” push button.
W9922PF PC DVD Playback Card 7.) When the next dialog box appears you just need to click on the “OK” push button to continue. 8.) The next “WinMPEG-2 Installation” window will show you the message “Ready to Install!”. Please click on the “Next>” push button to continue the installation of the application program.
W9922PF 9.) PC DVD Playback Card A “Notification” dialog box will appear, asking you if you want to install “Remote Control”. Please select the appropriate COM port and click on the “Yes” or “No” push button to proceed. 10.) The “ReadMe” window will appear. Please click on the “Yes” or “No” push button to continue. 11.) The WinMPEG-II Installation” window will appear. Congratulations! You have successfully installed the application software. Please click on the “Finish” push button.
W9922PF PC DVD Playback Card 12.) Click now on “OK” to restart your system so the changes can take effect immediately. 3.3. Region Code Configuration If you want to configure the region code for your PC DVD Playback card, please follow the steps as described below: 1.) 2.) 3.) 4.) Please start up your Microsoftâ Windowsâ 95 operating system. Click on the Start button and select the RUN item. Insert your CD-title into your CD-ROM drive D or E. Assuming your CD-ROM drive is D, type D:\DRV \SETUP.
W9922PF PC DVD Playback Card 5.) The following window will appear: 6.) Please select the correct region code which matches the region code of the movies you wish to play and click on the “Next>” push button.
W9922PF 4. PC DVD Playback Card WinMPEG-2 Application Software 4.1.
W9922PF PC DVD Playback Card ............ Direction button ..........Play back control for VCD 2.0 ............ Direction button ..........Config button ............ Direction button ..........Repeat button ............ Direction button ..........Menu select ....... Enter button ..........Lower audio volume ........... Multi subpicture ........... Multi audio ........... Multi angle ........... Output select (VGA/NTSC/PAL) ...........
W9922PF PC DVD Playback Card ............. Play previous segment ............. Scan backward play ............. Stop button ............. Fast play ............. Play button ............. Slow play ............. Pause button ............. Play step by step ............. Play next segment ............. Scan forward play ......... Power ON/OFF ............. Play previous segment ......... Minimize ............ Play next segment ......... Open disk to play ............ Fast play .........
W9922PF 5. PC DVD Playback Card About PC DVD 5.1. DVD License Statements This product is manufactured under licenses from Dolby Laboratories, CSS, and Macrovision. 5.1.1. Notice for Dolby Laboratories "Dolby", Pro logic" and the double- D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. (c)1992-1997 Dolby Laboratories, Inc. All rights reserved. 5.1.2.
