MachOne EV1935 - PCI SOUND CARD APPLICATION INSTALLATION Under WINDOWS 95 OSR2/ WINDOWS 98 and WINDOWS NT4.
MachOne EV1935 PCI Sound Card Windows 95OSR2/ 98/ NT4.0 MachOne EV1935 PCI Sound Card How to Install “Media Rack” Application Software 1.) To install the application software “Media Rack”, please start up your operating system. 2.) The “MachOne PCI Setup” windows will appear. If you want to install the application software in English now, please click on the first push button on the left side “install MediaRack (English)”. The Setup program will initialize.
MachOne EV1935 PCI Sound Card Windows 95OSR2/ 98/ NT4.0 4.) The next Setup window warns you about possible harm to your hearing. Please read the text carefully, before using your headphones. Click on OK to proceed to the next step. 5.) Setup program informs you that the installation of your new application software has been completed successfully. Please click on OK to finish the installation process. 6.
MachOne EV1935 - PCI SOUND CARD Configuration and Hardware USER MANUAL November 1998
MachOne EV1935 PCI Sound Card Configuration/Hardware TABLE OF CONTENTS 1. DESCRIPTION ............................................................................... 2 1.1. FEATURES ...................................................................................................2 1.2. SYSTEM REQUIREMENTS ..............................................................................3 1.3. CARD FIGURE ..............................................................................................3 1.4.
MachOne EV1935 PCI Sound Card 1. Configuration/Hardware DESCRIPTION The MachOne PCI is a 16-bit stereo PCI sound card based on the MachOne EV1935 PCI Audio controller chip. The MachOne PCI is compatible with all major PC sound standards, including Sound Blaster™ Pro, AdLib™, MPU-401 and Windows Sound System™. The MachOne PCI provides an integrated sound solution for business, educational and entertainment audio, and other multimedia applications. 1.1.
MachOne EV1935 PCI Sound Card Configuration/Hardware 1.2. System Requirements The MachOne PCI is manufactured for IBM PC compatible computers, software, and related computer components: • • • • Intel Pentium, Pentium II and compatibles (eg.
MachOne EV1935 PCI Sound Card Configuration/Hardware 1.4.2. Internal Connectors: J10: ........................Connector for CD-AUDIO IN. (ATAPI) J11: ........................Connector for CD-AUDIO IN. (JST) JP1: ........................Jumper for switching between SPEAKER OUT/LINE OUT. 1.4.3. Audio Connectors: J10: CD-Audio-In ATAPI L: LEFT CHANNEL SIGNAL G: GROUND R: RIGHT CHANNEL SIGNAL L G G R J11: CD-Audio-In JST L: LEFT CHANNEL SIGNAL G: GROUND R: RIGHT CHANNEL SIGNAL G L G R . 1.4.4.
MachOne EV1935 PCI Sound Card Configuration/Hardware 2.2. Handling the PCI Sound Card WARNING: Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready to work with it. Follow these precautions when handling the card: • • • • Before you open the static protective bag, touch it to a metal expansion slot cover on the back of your computer. This drains static electricity from the package and from your body.
MachOne EV1935 PCI Sound Card 3. Configuration/Hardware SOFTWARE INSTALLATION 3.1. Software Contents There is one installation CD-title which comes with this package. This CD-title includes the necessary device driver and application software for Microsoft® Windows® 95(OSR2)/98/NT4.0 operating system. 3.2. Driver Installation You might need the original Windows 95/98 or NT installation disk in some of the installation steps. 3.2.1.
MachOne EV1935 PCI Sound Card Configuration/Hardware 3.2.3. Windows NT4.0 1. 2. 3. 4. 5. 6. 7. 8. 9. From the Windows Taskbar (usually located at the bottom of your screen), go to “Start” ⇒ “Settings” ⇒ “Control Panel”, and open the “Control Panel” window. Double-click on the “Multimedia” icon to open the “Multimedia Properties” window. Select the “Devices” tab. Click on the “Add” button. Select “Unlisted or Updated Driver” from the list box, then click on “OK”.
MachOne EV1935 PCI Sound Card Configuration/Hardware 3.3. Application Installation “Media Rack” 3.3.1. Windows 95 (4.00.950B OSR2) 1. 2. Please start up your Microsoft Windows 95 OSR2 operating system. The “MachOne PCI Setup” windows will appear. Click on the first push button labeled “R”. The Setup program will initialize. The “Setup” dialog box will appear. Click on OK to accept the default directory "C:\Audio" as the destination location of your new Audio Software or type the name of a directory you
MachOne EV1935 PCI Sound Card Configuration/Hardware 3.6 System will prompt you for the Windows 95/98/NT4.0 installation disk. 3.7 After installation, double-click on the “Speaker” icon on the Windows taskbar (usually located at the bottom of your screen). The “Speaker” icon is located in the right corner of the Windows taskbar. The “Master volume” control window is shown as follows. 4.
MachOne EV1935 - PCI SOUND CARD DEVICE DRIVER INSTALLATION Under WINDOWS 95 OSR2 November 1998
MachOne EV1935 PCI Sound Card Windows 95 OSR2 MachOne EV1935 PCI Sound Card DEVICE DRIVER Installation Guide under Windows 95 OSR2 1.) The “Update Device Driver Wizard” dialog box will appear informing you that a new “PCI Multimedia Audio Device” has been found and will guide you through the rest of the SETUP program. Please insert now the installation CD-title that came with your PCI sound card. Click on the “Next>” push button to continue the installation of the device driver. 2.
MachOne EV1935 PCI Sound Card Windows 95 OSR2 3.) The “Select Other Location” dialog box will appear. Please type the letter of your CDROM drive. Assuming your CD-ROM drive is D, type the command D:\Win9x and click on the OK push button. 4.) The “Update Device Driver Wizard” dialog box will appear, informing you that the “MachOne PCI Sound System” has been found by the system. Please continue by clicking on the “Finish” push button.
MachOne EV1935 PCI Sound Card Windows 95 OSR2 5.) The “Insert Disk” dialog box will ask you to insert the “MachOne PCI Multimedia Disk”. Please insert your installation CD-title into your CD-ROM drive and click on OK. 6.) The “Copying Files…” dialog box will inform you that some files cannot be found. In order to complete the copying process key in the path name D:\Win9x. All necessary files will be copied onto your system. 7.
MachOne EV1935 PCI Sound Card 9.) Windows 95 OSR2 The system will copy all the necessary files from the Windows 95 CD-ROM. After several dialog boxes flash by the MachOne EV1935 PCI sound card installation has been completed. Congratulations! You have finished the installation of your new audio device driver “MachOne EV1935”. You are ready to use it now.
MachOne EV1935 PCI Sound Card Windows 95 OSR2 Verifying Device Driver Installation If you want to view the correct installation of the device driver for your MachOne EV1935 PCI sound card, please follow the steps as described below. 1.) Go to >START/ >”Settings”/ >”Control Panel" and double-click on the “System” icon. 2.) From the “System Properties” window select the “Device Manager” tap and you will see the following window displayed. 3.
MachOne EV1935 - PCI SOUND CARD DEVICE DRIVER INSTALLATION Under WINDOWS 98 November 1998 .
MachOne EV1935 PCI Sound Card Windows 98 MachOne EV1935 PCI Sound Card DEVICE DRIVER Installation Guide under Windows 98 If you want to install the device driver please follow the steps as described below: 1.) After you have installed your MachOne EV1935 PCI sound card, start up your Microsoft Windows 98 operating system. 2.) The “Add New Hardware Wizard” dialog box will appear as shown below. Click on the “Next>” push button to continue. 3.
MachOne EV1935 PCI Sound Card Windows 98 4.) In the next “Add New Hardware Wizard” dialog box click on the selection box “Specify a location” and “CD-ROM drive”. Please insert your installation CD-title into your CDROM drive now. Assuming your CD-ROM drive is D, please type the path D:\Win9x in the command line. Click on the “Next>” push button. 5.) The next “Add New Hardware Wizard” dialog box will inform you that the wizard has found the “MachOne PCI Sound System” audio device.
MachOne EV1935 PCI Sound Card Windows 98 6.) The next dialog box will display the message “MachOne PCI Sound System”. Please click on the “Finish” push button to complete the installation of the new device driver software. Congratulations! You have finished the installation of your new audio device driver “MachOne EV1935”. You are ready to use it now.
MachOne EV1935 PCI Sound Card Windows 98 Verifying Device Driver Installation If you want to view the correct installation of the device driver for your MachOne EV1935 PCI sound card, please follow the steps as described below. 1.) Go to >START/ >”Settings”/ >”Control Panel" and double-click on the “System” icon. 2.) From the “System Properties” window select the “Device Manager” tap and you will see the following window displayed. 3.
MachOne EV1935 - PCI SOUND CARD DEVICE DRIVER INSTALLATION Under WINDOWS NT4.