Data Sheet

WWW.LABGRUPPEN.COM
▸ 2350 W per channel @ 2 ohms**
▸ 2300 W per channel @ 4 ohms**
▸ 2U chassis weighing only 13.5 kg (30 lbs)
▸ Class TD
®
output stage
▸ Regulated Switch Mode Power Supply (R.SMPS
™
)
▸ Copper-nned Intercooler
®
with transverse-mounted output devices
▸ Full suite of protection and fault monitoring features
▸ Comprehensive loudspeaker preset database
▸ LoadLibrary
™
load “Fingerprint” (identity and characteristics) data
▸ Comprehensive LoadSmart
™
load verication and SpeakerSafe
™
con-
tinuous loudspeaker performance monitoring
▸ Dante
™
low-latency digital network included as standard
▸ Compatible with Lake LM 26, Dolby
®
Lake Processor and other legacy
Lake devices
▸ Primary and secondary network connections
▸ Digitally controlled ”amplier gain” adjustable in 0.1 dB steps from 22 to
44 dB
▸ Digital output attenuation in 0.25 dB steps from -inf to 0 dB
▸ Binding post or Neutrik
®
speakON
®
(1 x NLT8, 2 x NLT4) power output
connectors
▸ Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Lim-
iting (ISVPL
™
) adjustable in 0.1 V steps from 17.8 to 153 V
▸ Power Average Limiter (PAL)
▸ High-brightness front-panel LCD display
▸ Moisture resistant silicone touchpad for front-panel display mode selec-
tion and menu navigation
** More power available when driven asymmetrically.
▸ Raised Cosine Equalization
™
▸ Linear phase and classical crossovers
▸ LimiterMax
™
– peak and RMS limiters
▸ Iso-Float
™
ground isolation
▸ Super Module capability
▸ Integration of third party frequency measurement and analysis system via
the Lake Analyzer Bridge
▸ Analog and AES digital inputs with loop-thru outputs
▸ Auto-select input router for all inputs with user denable priorities
PLM 10000Q Powered Loudspeaker Management system
The PLM 10000Q seamlessly integrates networked digital signal
distribution, drive processing, power amplication, and load verication
plus performance monitoring in a single hardware unit with unied
software controller. Designated Powered Loudspeaker Management
(PLM
™
), this cohesive blend of Lake
®
Processing and Lab.gruppen
power affords signicant benets when compared to conventional
approaches utilizing separate components. The two-input, four-output
PLM 10000Q features a software-controlled bridge mode, allowing
one or both adjacent channel pairs can to be coupled for two or three
output channels with a power rating of 4700 W (@ 4 ohms) on the
bridged outputs.
Lab.gruppen Technology
Lake Processing Technology
PLM 10000Q
Technical Data
PLM™ Series: Powered Loudspeaker Management