Installation Guide

ManualsBrandsLa Crosse Technology ManualsDecorProjection Gray Digital Alarm Clock with Temperature

Page 3

Page 4

Page 2

ATOMIC PROJECTION

ALARM CLOCK

WITH INDOOR & OUTDOOR TEMPERATURE

MODEL: WT5220UITV2

DC: 071118

Full manual can be found under the Support tab here: bit.ly/wt-5220u-itv2

POWER UP

1. Insert 2-AA batteries into the back of your Outdoor Sensor.

2. Insert the 4.5 volt power cord into an outlet, then into the

bottom of your Alarm Clock. Optional: Insert 3-AA batteries for

backup.

3. Adjust time and date settings on your Alarm Clock.

5. Once the Outdoor Sensor is reading to your alarm clock, place

it outside in a shaded location.

WWVB ATOMIC TIME SIGNAL

• WWVB Icon will ﬂash when searching.

• The WWVB icon will remain on constantly when the time signal

has been received during the past 24 hours.

• For information about WWVB Atomic time visit:

http://bit.ly/AtomicTime

SETTINGS

1. Hold the MODE/MIN button to enter Settings Menu.

2. Press the MODE/MIN or AL/HOUR button to adjust values.

3. Press the SNOOZE button to conﬁrm adjustments and move to

next item.

Note:

When setting the time, both the hour and minutes will ﬂash:

• Use the AL/HOUR button to set the hour.

• Use the MODE/MIN button to set the minutes.

When setting the date, both the month and date will ﬂash:

• Use the AL/HOUR button to set the month.

• Use the MODE/MIN button to set the date.

Settings Menu Order:

• Time Zone

• Hour & Minutes (together)

• Year

• Month/Date (together)

• 12/24 Hour Format

• Fahrenheit/Celsius

• Daylight Saving Time ON/OFF

This clock can be set to time

zone +/- 12 or

anywhere in between.

North American time zones:

-4h ATL - Atlantic

-5h EST - Eastern (default)

-6h CST - Central

-7h MST - Mountain

-8h PST - Paciﬁc

-9h ALA - Alaska

-10h - Hawaiian

PROJECTION

Alternating Time and Outdoor Temperature:

• The clock will alternate projecting the time and the outdoor

temperature every 5 seconds.

• This cannot be adjusted.

Rotate Projection:

• Press and release the ARROWS button to rotate the image.

• The projected image can be rotated in 90 degree increments.

Projection Intensity:

Press and release the SUN button to change the brightness of the

projected image:

• High

• Medium

• Low

• OFF

ADUSTABLE DISPLAY

Press and release the MODE/MIN button to change what your

clock will display.

• Temperature

• Seconds counting

• Alarm Time

• Calendar

• The backlight will come on for 8 seconds whenever a button is

pressed. The backlight does not stay on constantly.

BACKLIGHT

Outdoor Sensor

TX37U-IT

Alarm Clock

WT-5220U-ITv2

Summary of content (2 pages)

PAGE 1
POWE R UP 1. Insert 2-AA batteries into the back of your Outdoor Sensor. ATOMI C PR OJ E CT ION AL AR M CLO CK WITH I N D O O R & OUTDOOR TEM PER AT URE 2. Insert the 4.5 volt power cord into an outlet, then into the bottom of your Alarm Clock. Optional: Insert 3-AA batteries for backup. 3. Adjust time and date settings on your Alarm Clock. 5. Once the Outdoor Sensor is reading to your alarm clock, place it outside in a shaded location.
PAGE 2
SE T A LA R M 1. Hold the AL/HOUR button to enter the Alarm Settings Menu. 2. Press the AL/HOUR button to adjust the hour, and MODE/MIN button to adjust the minutes. 3. Press the SNOOZE button to confirm adjustments and exit. ACTI VAT E | D E ACTIVATE A LA RM • Press the AL/HOUR button to activate or deactivate the alarm. • The Alarm Icon will appear when activated. SNO OZE POSIT ION SE NSOR SPE C I FI CAT I O N S • Mount the Outdoor Sensor on a north-facing wall in a well shaded area.