LTV-THP1Probe Sensor Specifications 031518 REMOTE SENSOR + LTV-THP1 LCD Full LCD Ambient - No probe Ambient w/ Probe (Ambient Temp/Humidity alternate) Sensor only (no probe): The ambient temperature is on the bottom and ambient humidity is on the top. With Probe: The word PROBE will show. Probe reading on the bottom, ambient Temp/Humidity alternates on top.
LTV-THP1Probe Sensor Specifications 031518 Note: • The full LCD has segments for all six types of probes. • This first sensor will only work with 3 probes: Temperature, Contact, and Wet/Dry. • The additional segments for future probes will not show.
LTV-THP1Probe Sensor Specifications 031518 2. Wet / Dry Probe: • Displays: WET or DRY 3. Contact Probes: • Displays: OPEN / CLSD Probe connected indicator • • When customer insert probe wire into sensor correctly, the word PROBE and probe readings will appear on LCD. If probe was not inserted correctly the word PROBE and probes readings will not show on LCD. Transmission Indicator • • The La Crosse View icon will be solid to indicate the sensor has power.
LTV-THP1Probe Sensor Specifications 031518 TX Button: Press and release to force a signal transmission. The La Crosse View Icon will flash twice. F/C Button: Press and release to change from Fahrenheit to Celsius temperature reading on the sensor LCD. Low Battery Indicator • Low battery indicator will only show when battery replacement is needed. Deltas • • Sensors will check the delta at the intervals below and if Delta is not met they will not transmit data until the transmit interval is met.
LTV-THP1Probe Sensor Specifications 031518 WARRANTY INFO La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd 2830 S. 26th St. La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.
LTV-THP1Probe Sensor Specifications 031518 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LTV-THP1Probe Sensor Specifications 031518 All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences.
