Quick Start Guide

ManualsBrandsLA CROSSE TECHNOLOGY ManualsElectronicsRAIN SENSOR

Find your full manual and product information here: bit.ly/laxtech_support

RAIN SENSOR

QUICK START GUIDE

MODEL #: LTV-R3V2

DC: 091322

STEP 1:

POWER U P S E N S O R S AND S TATION S

STEP 3:

MOUN T YOU R S E NSOR S

STEP 2:

CONNECT TO T HE LA CRO SSE VIEW™ A P P

SENSORS

In any order, insert batteries into your Thermo-Hygro, Wind,

and Rain Sensors.

AAA

STATIONS

• Insert the power cord into an outlet, then into your weather

station.

• Remove the battery insulation tab installed on the bottom of the

station.

• Insert 2 “AAA”batteries into the Bonus Display.

Note: It may take up to 10 minutes for your sensor data to appear

on your stations’ screen.

THERMO-HYGRO

Keep out of direct sunlight & ensure the sensor is well ventilated.

We recommend mounting under a deck or eave facing north.

WIND

Ensure the sensor is mounted vertically, an unobstructed rooftop is

ideal. Your Wind Sensor should be the tallest object in the area to

avoid reduced wind speed values.

RAIN

Check the sensor often to remove leaves or other debris that

could cause low rainfall readings.

Thermo-Hygro Sensor

LTV-TH2i

Weather Station

V30v4

Bonus Display

LTV-D2

Wind Sensor

LTV-W2

Rain Sensor

LTV-R3V2

DOWNLOAD

onto your mobile device.

LAUNCH & FOLLOW

CONNECT TO YOUR WI-FI NETWORK

1. The La Crosse View App is required to connect your station to the Wi-Fi

Network. Download the app ﬁrst.

2. The app will provide detailed instructions and inform you which buttons to press

while connecting your station to the Wi-Fi Network.

INITIAL SETUP OF NEW STATION If this is a new station and not yet added to

your account, tap ADD DEVICE in the app and follow the instructions to add

your staion to the app and connect to Wi-Fi.

RECONNECTING TO WI-FI: If the station is already in your account and you

want to recoonect to Wi-Fi, tap CONNECT WIFI in the app and follow the

instruction on your mobile device to connect to Wi-Fi.

3. When connected the Wi-Fi Indicator will become solid on your station.

For more troubleshooting tips and support visit:

www.lacrossetechnology.com/lacrosseviewsupport

Feature Standalone Connected

Wind Speed ✓ ✓

Wind Direction ✓

Rainfall Data ✓ ✓

Indoor & Outdoor Temperature ✓ ✓

“Feels Like” Temperature ✓ ✓

Indoor & Outdoor Humidity ✓ ✓

12-Hour Forecast ✓ ✓

Barometric Pressure ✓ ✓

Internet Time & Calendar ✓

Advanced Forecast Icons ✓

Daily Forecast HIs & LOs ✓

% Chance of Precipitation ✓

Ability to Add Sensors ✓ ✓

Data Stream Technology ✓

Beneﬁts of Connecting to La Crosse View™

Page 2 Page 3 Page 4

For weather station V30v4

Summary of content (3 pages)

PAGE 1
STEP 1: POWER U P S ENSO RS AND STAT I ON S STEP 2: For weather station V30v4 C O N N E CT TO THE L A C ROSSE VIEW™ A PP SENSORS In any order, insert batteries into your Thermo-Hygro, Wind, and Rain Sensors. - AA + AA onto your mobile device. - - AA + AA + LAUNCH & FOLLOW + C C Thermo-Hygro Sensor LTV-TH2i Wind Sensor LTV-W2 Rain Sensor LTV-R3V2 STATIONS • Insert the power cord into an outlet, then into your weather station.
PAGE 2
BU TTON S & F U N C TIONS For weather station V30v4 SE NSOR PLACE ME NT AND M O UN T I N G Buttons located on side of Color Weather Station • Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw through the front of your sensor. Buttons located on top of Color Weather Station SET Hold for basic setting. Press to view Wi-Fi status. TEMP, WIND, RAIN Press to view history. LIGHT Press to adjust brightness. Hold to set Auto Dim.
PAGE 3
CARE & M AIN T E NA N CE Replace the Coin Cell Battery 1. Use a coin to turn the battery cover to the left to remove it. 2. Pull back the metal pin and gently remove the battery. 3. Insert a fresh CR2032 battery with the + side up and snap into place. 4. Replace the battery cover and use the coin to turn it to the right to lock. Caution! WARNING 1. This product contains a button battery. 2. If swallowed, it could cause severe injury or death in just 2 hours. 3. Seek medical attention immediately.