Dual Alarm Clock For online video support: http://bit.
Table of Contents Button Function Explanation .................................................... Buttons and Ports ................................................................... Setup ................................................................................... Settings Menu ....................................................................... Set Alarm 1 | Set Alarm 2 ....................................................... Deactivate or Activate Alarm ........................................
Setup 1. Insert the 5.0 volt power cable into the wall outlet, then into the back of the clock. 2. (Optional), Insert 2 AAA batteries (not included) into the back of the clock to maintain time in the event of a power outage. Note: Batteries only will not provide a constant backlight. 3. Set time, calendar, etc. AAA AAA Power Cable Settings Menu • Hold the SET button to enter the settings menu. • Press the + or - buttons to adjust the values.
1. Beep ON | OFF 2. Set Hour 3. Set Minutes 4. Set Year 5. Set Month 6. Set Date 7. Format M/D | D/M 8. Fahrenheit | Celsius 9. English | Spanish Page | 3 www.lacrossetechnology.
Set Alarm 1 | Set Alarm 2 Setting the alarm and activating the alarm are separate actions. Alarm Time setting order: 1. Hours, 2. Minutes Set Alarm 1: 1. Hold the ALARM button to enter alarm setting mode. 2. Press the + or - buttons to adjust the alarm hour. 3. Press the ALARM button to confirm and set the minutes. 4. Press the + or - buttons to adjust the alarm minutes. 5. Press the ALARM button to confirm and exit. Set Alarm 2: Repeat steps 1-5 using ALARM 2 button.
USB Charging Port Charge mobile phones, cameras, or other devices when powering the alarm using the provided power cable. Note: This is a power-output charging port. It does not provide power to the alarm clock. • Connect your external device’s USB charging cable (not included) to the USB charging port on the front of the clock. • Charging times will vary. • USB Power Output: 1A maximum current. Charge 1A devices or devices that are self-regulating. Backlight For a constant backlight, use the power cable.
Visit Us on Social Media Latest video content http://bit.ly/LaxTech_YouTube For personalized interaction http://bit.ly/LaxTech_Facebook Join the conversation http://bit.ly/LaxTech__Twitter Pin and share http://bit.
Care and Maintenance • • • • • • • • Do not mix old and new batteries. Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries. Always purchase the correct size and grade of battery most suitable for intended use. Replace all batteries of a set at the same time. Clean the battery contacts and also those of the device prior to battery installation. Ensure the batteries are installed with correct polarity (+ and -). Remove batteries from equipment when it is not used for an extended period of time.