Smart Watch, Phone, and Earbuds pictured are not included. 2.
BASICS Table of Contents Initial Setup ALARM BASICS Power Up PROJECTION 02 Setting the Alarm 07 Projection Brightness 09 Buttons 03 Activate/Deactivate 08 Adjusting the Projection 09 LCD Display 04 Snooze Duration 08 Projection Image Options 10 Initial Setup Accessories & Ports 04 LCD Display Brightness 05 Auto-Dim Settings 05 Display Modes 06 Display Mode Options 06 CHARGING Settings Menu Order Note: To enter the Settings Menu after the initial startup, hold the of the cl
BASICS BASICS Buttons LCD Display 8 Time 2 3 4 5 Auto Dim Indicator Display Modes Calendar Calendar AM/PM Indicator 6 Temperature Alarm Indicator Alarm Auto-scroll all modes 7 Low Battery Indicator 1 Top View 1. DISPLAY OPTION Tap to select LCD display mode options 4. PLUS + Press to increase values, hold to change values quickly 7. SNOOZE/BACKLIGHT Press to adjust backlight or snooze a sounding alarm. Hold for Auto-Dim Settings. 2. MINUS - 3. Press to adjust projection intensity.
BASICS BASICS LCD Display Brightness Display Modes Adjusting the LCD Display Brightness Selecting the Display Mode Press the SNOOZE/BACKLIGHT button on the top of the clock to adjust the backlight intensity. There are 4 brightness levels, plus an off option. Tap the button on the front of the clock to select a display mode or automatically cycle through all of the available options. Auto-Dim Settings Program your LCD display to automatically dim during preselected times.
ALARM ALARM Time Alarm Time Alarm Setting the Alarm Activating & Deactivating the Alarm 1. Press the ALARM button to activate/deactivate the alarm (ON/OFF). 1. Hold the ALARM button on the top of the clock to enter the Alarm Settings Menu. 2. The icon will appear on the normal time display when the alarm is active. 2. Use the +/- buttons to set your desired time. Press the ALARM button to confirm. Ascending Alarm The alarm will increase in frequency over a 2-minute period.
PROJECTION PROJECTION Adjusting the Projection Image Projection Options Projection Brightness Projection Image Options You can choose to see the (1) time, (2) outdoor temperature and humidity, or (3) cycle through both options. Outdoor weather information is only available if an add-on sensor is connected. Current Time Selecting Your Projection Image Press the PROJECTION button to adjust the projection’s brightness (HI/LOW/OFF).
CHARGING CHARGING 5W Wireless Charger Adjustable Charging Coil As phone sizes can vary greatly, simply slide the Phone Charger Adjustment Handle up or down to best match your device and get it charging correctly. Charging your Qi-Enabled Phone • Place your Qi-Enabled phone on the platform. Your phone should be centered and should sit flush to the charging cradle. Note: Although this clock is capable of delivering 5W wireless charging, actual charging times will be determined by your mobile device.
CHARGING CHARGING Earbud Charging Smart Watch Stand 1. Remove the Dock Cover from the top of the alarm clock. The removable Smart Watch Stand is engineered to fit a variety of smart watch brands. Its open design allows for easy access to your device’s unique charging port location, for use with the included USB Charging Port. 2. Open the bottom Accessory Compartment and find the Earbud Dock and Cable Fittings. How to attach the Smart Watch Stand 1.
CHARGING ADD-ON SENSOR Cable Organizer Add-On Sensor Setup Use the included Cable Organizer to keep your charging cords neat and secure. Insert the organizer into the Cable Clip Keyhole and slide it down to lock in place. Lift up and pull the Cable Organizer out to remove it. 2. Hold the + button on the clock to search for the sensor. 1. Insert 2 “AA” Batteries into the sensor battery compartment. 3. Press the TX button inside the sensor battery compartment to transmit a signal.
ADD-ON SENSOR APPENDIX Optional Add-On Sensor Specifications • If the sensor loses connection to the clock for any reason, the clock will show NO after 30 minutes of disconnection. • The Sensor Reception Icon will disappear from the bottom right of the LCD and the clock will search for up to 3 minutes every hour to try to reestablish the connection. • To manually reconnect, hold the + button on the top of the clock to search for the sensor.
APPENDIX APPENDIX Warranty FCC Statement La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product, relating to manufacturing defects in materials and workmanship. 1.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
APPENDIX Button Cell Battery For detailed product videos, manuals, and more visit our support website: bit.ly/616a-1413_support WARNING 1. This product contains a button battery. 2. If swallowed, it could cause severe injury or death in just 2 hours. 3. Seek medical attention immediately. WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN 1. Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus. 2.