Re: Certification for Hyperlink IN2401 Radio Model: IN2401 FCC ID: MYF-H9PLA4121 CANADA: to be provided by IC USER'S MANUAL INFORMATION (PRELIMINARY) The User's Manual is in preparation. The following material will be contained in the manual: FCC ID: MYF-H9PLA4121 CANADA: to be provided by IC This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Hyperlink / Intel PRO Wireless Professional Extended-Range Antenna Kits Featuring Intel Spread Spectrum Radio Technology Installation Manual NOTE: The antenna system shall be installed ONLY by experienced antenna installers who are familiar with local building and safety codes, and wherever necessary have been licensed by appropriate government regulatory bodies.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Disclaimer: The diagrams used in this manual are for illustrative purposes only. They should not be confused with the Intel end-user installed antenna options. When these diagrams are used the transceiver will be installed in conjunction with the specific Professionally-Installed Antenna Kits including DC Injector/Lightning Protector, Amplifier, cables and antennas listed in this manual. Copyright © 2001, Hyperlink Technologies, Inc..
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems USA- Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Caution: Exposure to Radio Frequency Radiation. The radiated output power of this product is below the FCC radio exposure limits. Nevertheless, this product shall be used in such a manner that the potential for human contact during normal operation is minimized. Antenna shall be mounted in such a manner as to minimize the potential for human contact during normal operation.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Professional Antenna Kit Overview In addition to the standard Stratum MP end-user installable antenna options there are 12 additional Professional Extended-Range Antenna Kits that are available for Professional Installation Only.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Types of Installations The type of application will determine which type of kit to install: Multipoint Network This type of installation typically requires an Omni Directional Kit at the central node for 360-degree coverage.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems HYPERLINK / INTEL EXTENDED RANGE ANTENNA SYSTEMS Operating Frequencies / Channel Settings Hyperlink / Intel PRO-Wireless Extended Range Antenna Systems are approved for operation in different operating frequency channels. These channels are based upon the eleven standard IEEE 802.11 channels. NOTE: This equipment authorized for operation according to the tables below.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems CENTER FREQ 2412 2417 2422 2425 2427 2432 2437 2442 2447 2449 2452 2457 2462 HG2408PA HG2409PA HG2414PA M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M DIRECTIONAL ANTENNA SYSTEMS AMPLIFIED HG2415YA HG2419GA HG2424GA M M M M M M M M M M M P P P P P P P P NOTES: M - These systems are authorized for Point-to-Point as well as Multipoint operation.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Antenna SYSTEM CONNECTION NOTE: THE ANTENNA SYSTEM SHALL BE INSTALLED ONLY BY EXPERIENCED ANTENNA INSTALLERS WHO ARE FAMILIAR WITH LOCAL BUILDING AND SAFETY CODES, AND WHEREVER NECESSARY HAVE BEEN LICENSED BY APPROPRIATE GOVERNMENT REGULATORY BODIES. FAILURE TO DO SO MAY VOID THE PRODUCT WARRANTY, AS WELL AS EXPOSE THE END-USER TO LEGAL AND/OR FINANCIAL LIABILITIES.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Preparing for Antenna System Installation Warning: These antennas are designed to be mounted in open areas such as rooftops or building exterior walls. They are designed to be installed at least 6 feet away from areas occupied by people. During system operation, always keep the antenna at least 1 foot away from your head. Warning: Before performing the following steps make certain that there are not any power lines within 50 ft.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Installing Non-Amplified Antenna Systems Follow these instructions for the following kits: HG2408U HG2414P HG2410U HG2415Y HG2415U HG2424G Overall System Configuration The overall system configuration is shown below. Refer to this diagram while reading the section which follows, and during system installation.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Mounting and Cabling the Non-Amplified Antenna System: Note: Different model antenna kits have different mounting requirements and procedures. Refer to Appendix A in this manual for antenna mounting details. 1. Attach the mast mounting hardware to a solid structure on your building (e.g., the roof itself, concrete bulkhead, vent pipe). 2.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Installing Amplified Antenna Systems Follow these instructions for the amplified antenna kits. Overall System Configuration The overall amplified system configuration is shown below. Refer to this diagram while reading the section which follows, and during system installation.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Installing the Amplifier Bracket for mast-mounting: Install the right angle bracket as shown above using two (2) #10-32 screws and split lock washers as shown. Note the orientation of the label relative to the 90 degree bend in the bracket. Proper positioning will ensure better visibility of the indicator LEDs when installed on the mast.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Installing the DC Injector Mounting Bracket: Install the bracket as shown above using two (2) self-tapping screws and split lock washers as shown. For optimal lightning protection, it is recommended that one screw also be used for attachment of a suitable ground wire.
Hyperlink / Intel PRO – Extended-Range Professional Antenna Systems Mounting and Cabling the Amplified Antenna System: Note: Different model antenna kits have different mounting requirements and procedures. Refer to Appendix A in this manual for antenna mounting details. 1. Attach the mast mounting hardware to a solid structure on your building (e.g., the roof itself, concrete bulkhead, vent pipe). 2.