User's Manual

ManualsBrandsKZ Broadband Technologies ManualsElectronicsWIFI VOIP GATEWAY

iSurf 1000 Multi-Service Home Gateway

User Operation Manual

Version 1.1

KZ BROADBAND TECHNOLOGY Co. Ltd. CONFIDENTIAL

This document and the information contained in it is confidential information of KZ Broadband Technologies Ltd (KZ Tech),

and shall not be used, or publish, or disclosed, or disseminated outside of KZ Tech in whole or in part without KZ Tech’s

consent. This document contains trade secrets of KZ Tech. Reverse engineering of any or all of the information in document

is prohibited. The copyright notice does not imply publication of this document

CONFIDENTIAL INFORMATION

Information contained herein is proprietary to KZ Tech for whose benefit

confidentiality shall be maintained.

Summary of content (13 pages)

PAGE 1
iSurf 1000 Multi-Service Home Gateway User Operation Manual Version 1.1 KZ BROADBAND TECHNOLOGY Co. Ltd. CONFIDENTIAL This document and the information contained in it is confidential information of KZ Broadband Technologies Ltd (KZ Tech), and shall not be used, or publish, or disclosed, or disseminated outside of KZ Tech in whole or in part without KZ Tech’s consent. This document contains trade secrets of KZ Tech. Reverse engineering of any or all of the information in document is prohibited.
PAGE 2
iSurf 1000 User Operation Manual 1. Packing List The product is shipped with the following standard accessory and parts. The user should contact the local distributor if there is any part missing. Content Quantity Main System Unit 1 12V DC Power Adapter 1 RJ45 Ethernet Cable 1 Quick User Manual 1 Product Warranty Card 1 2.
PAGE 3
iSurf 1000 User Operation Manual 3.
PAGE 4
. Front Panel Description Table 1 Front Panel LED Specification LED Function Description PWR Power supply indicator, Orange Color – Device is booting up Green Color – Device in normal operation dual color LED WAN WAN port status LED Orange Color – Device WAN port is not yet ready for ( dual color) normal operation. Solid Green – Device WAN port is up and ready. Blinking Green – WAN port data transmission in progress.
PAGE 5
iSurf 1000 User Operation Manual 5. Rear Panel Description Interface Function Description 12V DC Power connector DC Power Supply with harmonic suppression: 12V 1.5A. Reset Device Restart and Factory Default Reset Press and immediate release: reboot the device. Press and hold (10 seconds): Reset the device to factory default settings. User configuration data will be deleted. WPS Wi-Fi Protected Service Access Press the WPS button to begin automatic user access process.
PAGE 6
iSurf 1000 User Operation Manual 【2】 Check the product label carefully and make sure the device S/N and MAC is clearly visible. 【3】 Connect your PC to the one of the LAN port using regular Ethernet cable. 【4】 Connect the device WAN port to the ADSL modem or other uplink networking devices via Ethernet networking cable. 【5】 Connector analog phone cables to the RJ11 ports of the device. 【6】 As a last step, connect the DC power supply and plug the DC power adapter into AC power source.
PAGE 7
iSurf 1000 User Operation Manual user also has the option to navigate the configuration menu to complete the setup. For advanced user or system operator, the admin level WEB GUI management interface is available. It requires special admin password to gain full access of the device and configure the devices. Note admin level management function is not described in this manual.  Login Once the user enters the correct URL (http://172.16.1.1), the following login window will be prompted.
PAGE 8
iSurf 1000 User Operation Manual  Setup Wizard Select the “Setup Wizard” and click on the “Next” to enter Wizard welcome page as shown below.
PAGE 9
iSurf 1000 User Operation Manual PPPoE) to connect to Internet based on his access network type. If the user is not sure about the type of access type he should use, please consult with the service provider. For PPPoE dial up Internet access, the user will be required to configure the User name and Password for PPPoE dial up access. The user can also select the appropriate operation mode he needs.
PAGE 10
iSurf 1000 User Operation Manual In this configuration page, the user requires to enter the SIP account and password information if he desires to configure the VoIP networking. The SIP server configuration will be performed by the network operator via admin management. The SIP account status is displayed for user information. When the SIP line is registered and ready, the LINE LED in the front panel will be light up.
PAGE 11
iSurf 1000 User Operation Manual Once the device restarts, please wait for a few minutes until the following windows appear again. The user may select “Advanced Self Setup” to quickly review and confirm the all setup. Click “Next” to proceed and enter the Self Setup menu as below.
PAGE 12
iSurf 1000 User Operation Manual For device maintenance operation, the user can use Device Maintenance menu to perform the operation required. There are three type maintenance operations are supported by user level management: 1) Update Device Firmware 2) Import Device Configuration File 3) Reset Device Configuration to Operator or Factory Default. 8.
PAGE 13
iSurf 1000 User Operation Manual  FCC Notice to user This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.