AirMaster 4000D B12/17 LTE Outdoor CPE User Manual
Table of Contents 1. OVERVIEW ............................................................................................................................................... 4 USER INTERFACE SPECIFICATION ............................................................................................................ 4 LTE INTERFACE SPECIFICATION .............................................................................................................. 4 2. GETTING STARTED....................................
PLEASE READ THESE SAFETY PRECAUTIONS! RF Energy Health Hazard The radio equipment described in this guide uses radio frequency transmitters. Although the power level is low, the concentrated energy from a directional antenna may pose a health hazard. Do not allow people to come in close proximity to the front of the antenna while the transmitter is operating.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 1. Overview The AM4000D is a high performance 4G LTE outdoor CPE product designed to enable quick LTE fixed data service deployment to the remote customers. It provides high data throughput and networking features to end users who need both bandwidth and quality service in the remote area. 1.1.
Power Cord Mounting brackets PC Ethernet Cable 1 1 1 If you find any of the items missed, please contact your local distributor immediately. CPE Packing List: Please unpack the package and check the unit for the following items. 2.2. Installing the Equipment Device logic connection For outdoor CPE product, it is preferred that the CPE device be installed in a shaded area to avoid direct sun light exposure which may cause over heat in certain extreme weather condition.
Installing Outdoor Unit (ODU) Mounting Bracket: Header Connection: Page 6
Page 7
3. RF Signal Adjusting RF Signal Adjusting After the CPE outdoor unit has installed, the direction of antenna’s azimuth and pitch angle needs to adjust for the best signal strength. In near line of sight condition, the CPE will have the best signal when the antenna is directly pointing the base station. User can adjust the holder to change the direction and angle of the antenna while observing the RF LED on the outdoor unit which indicates the signal strength.
LED Display LED Indicator Function Description PWR Power Indicator Green Color – Device is powered on RUN System Run Indicator Fast Blinking – Device is rebooting Solid Green – Device is in normal operation LAN LAN port status Solid Green – LAN port is up Blinking Green – LAN data activity in progress SIM SIM Card Indicator Light is on – SIM card state ready.
Device Status Once the user is logged in, the following window device status window will be prompted for viewing. It contains both the wireless link information, networking and device information configured for the device. For wireless info gives quite detailed information about the radio connection and user can use it to determine the receiving signal strength and transmit power of the device.
operation. Applications Configuration Port Range Forwarding: Certain applications may require to open specific ports in order for it to function correctly. Examples of these applications include servers and certain online games. When a request for a certain port comes in from the Internet, the device will route the data to the computer you specify. Due to security concerns, you may want to limit port forwarding to only those ports you are using, and uncheck the Enable checkbox after you are finished.
concerns, you may want to limit port forwarding to only those ports you are using, and uncheck the Enable checkbox after you are finished. UPnP Setting Forwards: Configure Port forwarding for UPnP. Click the trash sign to delete individual entry. UPnP Service: Allows applications to automatically setup port forwarding.
Firmware Upgrade over HTTP: Click on the Browser button to select the firmware file to be uploaded to the device. Click the Upgrade button to begin the upgrade process. Upgrade must not be interrupted. Old Password: The password currently in use. New Password: The new password must not exceed 63 characters in length and must not include any spaces. Enter the new password a second time to confirm it. Firmware Update Checking: This will disable or enable the firmware update check during user login.
configuration and make sure the DHCP is enabled. To release and renew the correct IP address, please unplug the Ethernet cable from PC and wait for about 5 seconds, then connect it again. If the problem persists, please contact the operator or distributor for further diagnose. 3) My CPE networking is not working properly. You may want to check if the LTE connection is up and running properly. You can do this by login the WEB GUI and check the LTE Interface Info page.
