T Torino S2300 D R AF user guide User Guide 1
are owned by Bluetooth SIG, Inc. and used by Kyocera Communications Inc. under license. All other trademarks are the property of their respective owners. Copyright © 2010 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2010 Kyocera Wireless Corp. 82-A6074-1EN, Rev.
Display Grant section www.fcc.gov/oet/ea after searching on the FCC ID: OVF-K5302. Additional information on SAR can be found on the Cellular Telecommunications and Internet Association (CTIA) web-site at www.ctia.org. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
Potentially unsafe areas T Use with care Use only in normal position (to ear). Avoid dropping, hitting, bending, or sitting on the phone. Avoid magnetic environments Keep the phone away from magnets which can cause improper functioning of the phone. Keep your phone dry D R Posted facilities—Turn your phone off in any facility when posted notices require you to do so. Aircraft—FCC regulations prohibit using your phone on a plane that is in the air.
Radio Frequency (RF) energy hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings—Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
D T AF R
Table of Contents 2 Get Started . . . . . . . . . . . . . . . . . . . . . . . . 9 6 Call Features . . . . . . . . . . . . . . . . . . . . . 16 7 16 16 16 16 17 17 17 17 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 22 22 22 23 23 24 25 26 27 28 28 D R Contacts Menu . . . . . . . . . . . . . . . . . . . . . Access Contacts . . . . . . . . . . . . . . . . . . . . Add Contacts . . . . . . . . . . . . . . . . . . . . . . Use Contacts . . . . . . . . . . . . . . . . . . . . . . .
12 Settings . . . . . . . . . . . . . . . . . . . . . . . . . .56 Settings Menu . . . . . . . . . . . . . . . . . . . . . . 56 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Convenience . . . . . . . . . . . . . . . . . . . . . . . 61 Voice Features . . . . . . . . . . . . . . . . . . . . . .
1 Get Started Charge the Battery Install the Battery 1. Open the microUSB jack cover on the top of the phone. Connect the AC adapter to the microUSB jack. 2. Plug the adapter into a wall outlet. The battery icon in the upper-right corner of the screen tells you whether the phone is: – Charging (the icon is animated) – Partially charged – Fully charged You must have at least a partial charge in the battery to make or receive calls.
Battery Safety Guidelines • • • D R • • • • • • • Common Causes of Battery Drain • • • • • • • • 10 Replace the battery only with another qualified battery. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether a replacement battery is compatible, contact customer support. Promptly dispose of used batteries in accordance with local regulations and recycle if possible. Do not dispose as household waste.
Phone Overview Get to Know Your Phone # Q A 2 E 3 R T / F G 8 9 % 5 Z X CAP 0 C V _ ) _ Y U I H J K L ‛ M ‛‛ . ( D 6 S 7 4 = & B N Space + O $ ! @ P ? SYM D R AF Fn 1 W ‘ T The following shows the phone’s keypad. 1. Earpiece speaker. 1 2. Home screen. 2 3. Left softkey selects items that appear on the lower left of the display. At the home screen, you can select Menu. 4.
1 4 2 5 3 6 T The following shows the back of the phone. 1. Jack for a hands-free headset (sold separately). 2. Camera lens. 3. Accessory eyelet (for optional straps and lanyards). 4. Jack for AC adapter (included) and microUSB cable (sold separately). 5. External speaker. 6. Camera key activates camera mode. Press and hold the Camera key to activate camera mode. 7. Volume key raises or lowers ringer volume. Warning: Inserting an accessory into the incorrect jack will damage the phone.
Content is DRM protected. Position location is set to emergency services only. Position location is set to your service provider and to emergency services. The phone has a high speed data connection. A call is in progress. New message. The speaker phone is turned on. A T-coil hearing aid is in operation. A traffic channel is active. The phone is in TTY device mode. The phone is set to vibrate or to vibrate and then ring. AF The phone is set to light up instead of ring. The phone is receiving a signal.
Main Menu From the home screen, press the OK key or select Menu to access the main menu. Level 1 > Level 2 Menu Contacts Access these options: View All, Add New, Groups, Speed Dial List, Voice Dial List, Erase Contacts, and Contacts Count. Recent Calls Access these options: All, Incoming, Outgoing, Missed, Erase Call List, Call Timers, and Kilobyte Counter. Browser Browse the web. Alarm Clock Set an alarm. Media Gallery Access these options: Images, Sounds, and Delete All.
Guide Conventions D R AF T In this guide, the following conventions are used when describing phone features. Select means to press the Left softkey, Right softkey or OK key to select an item seen on the display. For example, “Select Menu” tells you to physically press the left softkey to choose Menu from the display. Press means to press a phone key. For example, “Press the Send key to make a phone call” tells you to physically press the Send key on your phone.
Call Features This section describes the basic features related to calls. Power Phone Up • To turn your phone on, press the End key and wait until the phone display lights up. To turn your phone off, press and hold the End key until the phone plays a short musical sound and turns off. Make Phone Calls You can use voice commands to call a contact from your voice dial list or to dial a phone number. For more information, see “Voice Commands” on page 76. Redial a Number 1.
Activate Voice Dialing Use Speed Dialing 1. Press and hold the Send key. 2. Follow the prompts. For more information, see “Voice Commands” on page 76. Speed dialing allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Assign Speed Dials to Contacts” on page 25. To call a contact that has a speed dial location: 1. Enter the one- or two-digit speed dial location. 2.
Exit Emergency Services D R AF T When you have completed the emergency call: 1. Select Exit. 2. Select Exit again to confirm your choice. Note: To determine who has access to your location, see “Set Location Information” on page 67.
3 Text Entry You can enter letters, numbers, and symbols in contacts, text messages, and your banner. Press the Function key once to change the mode for the next character only. Text Entry Modes Enter Letters with QWERTY Keypad From the text entry field, select Options > Normal Alpha to enter letters. You can enter text in the following ways: • To enter a letter, press the key for the letter. Press the Shift key to change the case of a letter.
The icon indicates you are in Rapid Entry mode. To change case mode, press the Shift key. D R AF While entering text in Normal Alpha mode, press the Function key and then the key for the number or symbol. To access more symbols, do one of the following: • Press the Symbol key and then the key for the symbol. • Select Options > Add Symbols and then the key for the symbol.
Text Entry Quick Reference This table gives instructions for entering letters, numbers, and symbols. Do this.. Enter a letter In Normal Alpha mode, press a key. Enter a number In Numbers Only mode, press a key. Enter a symbol Use Normal Alpha mode, press the Function key and then a key. Enter a space Press the Space key. T To.. Erase a character Press the Back key. Press and hold the Back key.
4 Contacts Use Contacts to store information about a person or company. Contacts Menu Select Contacts from the main menu to access the following functions: Level 3 View All Access your existing contacts list. Add New Add a new entry to your contacts list. Groups View your groups of contacts. Speed Dial List View your contacts assigned with speed dials. Voice Dial List View your contacts assigned with voice dials. Erase Contacts Access these options: Contacts Only, Groups Only, Erase All.
Use Frequent List up or down to move through the contact fields.) 4. When done, select Save. With Frequent List enabled, you can view 15 of your most frequently called contacts. See “Enable Frequent List” on page 63. Add a Code or Extension Use Fast Find Add Contacts AF Add Contacts from Home Screen When saving the phone number of an automated service, you may include a pause for dialing an extension. 1. From the home screen, enter a phone number. 2.
Send a Multimedia Message to Contacts Send a Contact vCard Edit Contact Details 1. From View All, select a contact. 2. At the contact details screen, select Edit. 3. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.) 4. When done, select Save. Assign Number Types 1. From View All, select a contact. 2. At the contact details screen, select Edit. 3. Press down twice to scroll to the number type dropdown and press the OK key.
2. At the contact details screen, highlight the contact name. 3. Select Options > Msg Tone > Assign Msg Tone and a ringer from the list. (Scroll to play the ringers.) Assign Pictures to Contacts Add Contacts to Groups 1. From View All, select a contact. 2. At the contact details screen, highlight a number or email address. 3. Select Options > Add to Group. 4. Select groups from the list provided. A checkmark appears next to each selection. You can also remove a checkmark. 5. When finished, select Done.
Erase an Entire Contact Erase All Contacts Create a New Group 1. From Groups, select New. 2. Enter a name for the group and select Next. 3. Select contacts from the list provided. A checkmark appears next to each selection. You can also remove checkmarks. 4. When finished, select Done. Your new group appears the next time you view your groups list. AF 1. From View All, select a contact. 2. At the contact details screen, highlight the contact name. 3.
Send a Group vCard 3. If you are modifying a group you created, select Next. Otherwise, go to the next step. 4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks. 5. When finished, select Done. 1. At the Groups list, highlight a group. 2. Select Options > Send > Via Bluetooth. 3. Complete the appropriate task to send the group information. Assign Ringers to Groups 1. From Groups, highlight a group. 2.
Voice Dial List Search Contact Voice AF Your phone creates a voice dial tag for each contact that has a name field which is not blank or a name that is more than five syllables. You can enable or disable the voice dial tags associated with your contacts. 1. From Voice Dial List, press the OK key to add or remove checkmarks. A checkmark appears next to each enabled voice dial. (Scroll through the list to play the voice dial tags.) 2. When done, select Save.
5 Recent Calls Recent Calls Menu Select Recent Calls from the main menu to access the following functions: Level 2 > Level 3 Recent Calls All See a list of all voice calls. Incoming See a list of all voice calls you have received. Outgoing See a list of all voice calls you have made. Missed See a list of all voice calls you have missed. AF T Level 1 > Access these options: All, Incoming, Outgoing, and Missed.
Return a Missed Call Send Text Message from Call List 1. From Missed, highlight a number. 2. Press the Send key to call the number or select Options to access more features. This list contains all calls you received, but did not answer. 1. At a call list, highlight a contact. 2. Select Options > Send Text Msg. 3. Complete your text message and select Send. Call List Options R Save Number from Call List 1. At a call list, highlight a contact. 2. Select Options > Send Pic Msg. 3.
Work with Call Timers This timer tracks all roaming calls made and received since you last reset the timer. To reset this timer to zero, select Reset > Yes. Your phone can alert you with a short beep ten seconds before each minute passes during a call. For more information, see “Enable Minute Alert” on page 63. View All Calls Timer Select Life Timer to view the number of calls and the total call time. Select Done when finished.
Browser You can use your phone to browse the Internet if you have obtained phone Internet services from your service provider and if over-the-air Internet access is available in your area. Launch Browser • • To choose a site, scroll to the link and press the OK key. An underline and an arrow indicate that there is more text. Scroll down to view the rest of the text. Press the Back key to return to the previous screen. Press the End key to exit. Select Options to access more browser features.
7 Alarm Clock You can set up to four alerts with your phone’s three alarm clocks and one quick alarm. Note: The alert occurs only if the phone is on. Set an Alarm Change Alarm Clock Settings From Settings, you can modify the following features. T 1. From Alarm Clock, scroll to one of the alarms and select Set. 2. Press the OK key to change the time, if needed. – Scroll left or right to move between hour, minute and AM/PM fields. – Scroll up or down to change hour, minute and AM/PM.
8 Media Gallery Use Media Gallery to retrieve and playback media files and other downloads. Media Gallery Menu Select Media Gallery from the main menu to access the following functions: Level 2 > Level 3 Media Gallery Images Access these options: Camera Pictures, Saved Images, Wallpapers, Wallpaper Shuffle, Screensavers, and Caller IDs. Sounds Access these options: Saved Sounds, Ringers, Ringer Shuffle, and Voice Memos.
Change the Default Wallpaper Assign a Ringer 1. From Wallpapers, select a wallpaper. 2. Select Set Default. 1. From Ringers, highlight a ringer. 2. Select Assign and choose how you want to assign the ringer. 3. Complete the appropriate task. Edit the Wallpaper Shuffle Change the Default Screensaver Assign a Caller ID D R 1. From Caller IDs, select an image. 2. Select Assign. 3. At the contacts list, select a contact. Sounds Send a Sound 1. From Saved Sounds, highlight a sound. 2.
Send a File Play a File 1. From a media file list, highlight a file. 2. Select Options > Send > Via EMS (to attach to an enhanced message), Via MMS (to attach to a multimedia message), Via Bluetooth (to send to a Bluetooth-enabled device), or To Printer (to print on a Bluetooth-enabled device). The options available depend on the file type. 3. Complete the appropriate task. Note: If your phone has no Bluetooth feature, you may send the file with a message only. 1.
View a Slideshow Erase All Image Files 1. From Camera Pictures, select Options > Slideshow to play the slideshow of the files contained in the current folder. 2. Select Pause (to stop), Play (to resume), or Options (to access more features). With Options selected, your phone automatically pauses the slideshow. 3. When you are done, select Options > Exit. From Delete All, select Images Only > Yes to erase all files in the Images folder. Note: You can only erase unlocked files.
9 Messaging Use Messaging to send, receive, and erase messages from your phone. Messaging Menu Select Messaging from the main menu to access the following functions: Level 2 > Level 3 Messaging New Text Msg Compose a text message. New Pic Msg Compose a multimedia message. Voicemail Shows how many voicemails are waiting. Inbox Shows a list of received text and multimedia messages. Browser Alerts Shows how many alerts are waiting. Sent Msgs Shows a list of messages you have successfully sent.
Send Messages Create a Text Message 2. 3. 4. 5. T You can only send text messages to phone numbers capable of receiving them or to email addresses if supported. 1. From New Text Msg, enter a recipient’s phone number or email address. (Select Options to access contacts, groups or recently used addresses. Scroll down to move to the next field when done.) You can message up to ten recipients at once. Use comma or spaces to separate addresses. 2. Enter the message. (Select Options to access more features.) 3.
Add Recipients from Contacts Save Recipients as Contacts 1. At the compose message screen, select Options > Contacts when entering a phone number or email address. 2. Select a contact from the contacts list. 3. Select a number or address. 4. Complete your message. 1. At the compose message screen, select Options > Save Address when entering a phone number or email address. 2. Select a number or address. 3.
Complete Messages in Drafts Add Memos to Messages 1. From Drafts, highlight your desired message. 2. Select Edit or Options > Edit. 3. Complete your message. 1. At the compose message screen, select Options > Insert Note when entering the text. 2. Select a memo. 3. Complete your message. Use Preset Text Add Pictures to Messages 1. At the compose message screen, select Options > Insert Picture when entering the text. 2. Select a file. 3. Complete your message. AF 1.
Add Media Files to Messages D R 1. At the compose message screen, select Options > Media Gallery when adding a media file. 2. Select a file to add to your message. To remove a media file, select the applicable option. For example, to remove a sound, select Options > Remove Sound. 3. Complete your message. Take Pictures for Messages 1. At the compose message screen, select Options > Take a Picture when adding an image. 2. Take a picture. 3. Select it to add to your message. 4. Complete your message.
Request a Message Receipt – Scroll up or down to change the month, day, and year. 6. Select Done. 7. Complete your message. Your phone will save the message and send it later. Set Message Priority Set the Validity Period 1. When entering a message, select Options > Msg Settings > Set Priority to set the priority level. 2. Complete your message. 1. When entering a message, select Options > Msg Settings > Validity Period. 2.
1. When entering the message, select Options > Msg Settings > CC & BCC to enable or disable the CC and BCC address fields. 2. Complete your message. Manage Received Messages Reply to Text Messages Reply to Multimedia Messages (with Prompt) When receiving a message in prompt mode, your phone displays a notification showing a new message is available for download. 1. At the download notification, select Yes (to download the message) or Options (to retrieve it later or erase it without downloading). 2.
add to an existing contact, or create a new contact depending on the sender. Reply to all Recipients Lock Messages 1. When viewing a received message, select Options > Reply All to send your reply to all the message recipients. 2. Complete the message and select Send. When viewing a received message, select Options > Lock Msg to protect it from accidental deletion. To unlock the message, select Options > Unlock Msg. Reply with a Copy of the Message Sort Messages in Inbox 1.
When viewing a received message containing multiple slides, use the following options to navigate through the slides. • Next to view the next slide. • Options > Replay to restart the message from the beginning slide. • Options > Pause to pause at the current slide. • Options > Resume to resume playing the slides. • Options > Done to exit the message. Check your Voicemail When you receive a voicemail message, a notification with a voicemail message icon appears at the top of your screen.
The message was sent. You cannot cancel delivery of the message. The message has been received. The message has been sent to more than one recipient. Check Message Status in Outbox AF The message is pending and will be sent when possible. You can cancel delivery of the message. T Use the following symbols to check your Outbox for the status of messages sent but still in process. Warning: Your service provider may charge you for each message segment.
Set Page Alerts Set Message List View 1. From Alerts, select Page Alert. 2. Select an alert for pages. If you select an & Remind alert, the phone notifies you once when receiving a new message and notifies you again every five minutes. To stop a reminder alert, select Ignore. From Msg List View, select one of the following to set your message list display: • Sender & Preview displays the sender and first part of messages. • Sender & Date-Time displays the sender and sent time of messages.
Enable Auto Retrieve Enable CC/BCC Fields From CC and BCC, select Disabled (to hide the CC and BCC fields) or Enabled (to show them). R Set Callback Number D 1. From Callback Number, enter a new number to change your default callback number. 2. Select OK to save the number. Enable Save to Sent From Save to Sent, select Enabled to automatically save outgoing messages to the Sent Msgs folder.
Set your Voicemail Number Erase Messages from a Folder Often your service provider automatically programs your voicemail number (the number your phone calls to retrieve voicemail). To change it: 1. From Voicemail Number, select Edit. 2. Enter your voicemail number. (Use Options > Time Pause or Hard Pause to enter pauses.) 3. Select Save. From Erase Msgs, select a folder to erase messages from. For example, to erase received messages, select Inbox > Yes. Note: You cannot recover deleted information.
10 Camera Camera Tips T Your phone has a camera. Before using your phone’s camera, here are some tips: • You cannot activate the camera while on an active call or while browsing files in the media gallery. • Once the camera is active, the home screen acts as the viewfinder. • If you get a “Low memory” error, check your resolution and quality compression settings. • If there is no activity within 30 seconds after you turn your camera on, the camera times out and returns to the previous launch point.
Set Color Tone From camera mode, select Options > Settings > Date/Time > On to place a date/time stamp on each picture taken. The icon indicates when the date/time stamp is on. 1. From camera mode, select Options > Settings > Color Tone. 2. Scroll left or right to select a color tone. Look at the viewfinder to see how each setting looks. Enable Multishot Mode Set Picture Quality From camera mode, select Options > Settings > Multishot > On to take multiple pictures.
11 Scheduler Use Scheduler to schedule events and set reminder alerts. Create an Event D R AF T 1. From Add New Event, enter a name. Scroll down to move to the next field when done. 2. Press the OK key to select an event type from the list. 3. Press the OK key to change the date, if needed. – Scroll left or right to move between month, day, and year fields. – Scroll up or down to change month, day, and year. Press the OK key to save and move to the next field. 4.
View Events by Date From View Day, do one of the following: • Scroll left or right to move to another date. • Select an event. • Scroll to a time and select Add New to create a new event. • Select Options to access more features. Go to a Specific Date R View Events by List From View All Events, select an event from the list or Options to access more features. D Return to the Current Date From View Day, select Options > Go to Today to return to the current date.
Erase Events – Scroll up or down to change hour, minute, and AM/PM. 2. Select Save when done. Erase an Event 1. From View Day, select an event. 2. At the event details screen, select Options > Erase > Yes. Erase Events Automatically From Auto Erase, select an option from the list to set when to automatically erase your past events. Erase the Current Day’s Events From View Day, select Options > Erase Today’s Events > Yes to erase all events on that day.
12 Settings Settings Menu Select Settings from the main menu to access the following functions: Level 2 > Level 3 Settings Bluetooth Access these options: On/Off, My Devices, and Settings. Browser Access these options: Multimedia, Look & Feel, Security, and Edit Search URL. Sounds Access these options: Ringers, Ringer Mode, Volume, Pwr On/Off Sound, and Keypad.
Bluetooth Set Scroll Step Use Bluetooth to configure your devices. See “Bluetooth” on page 74 for more information. From Scroll Step, set how far up or down you go when you scroll through Web page. Browser Set Connection Timeout Multimedia From Multimedia, you can modify the following settings. Show Images Play Sounds R From Sounds, choose whether or not to play sounds when you use the browser. Download Objects D From Objects, choose whether or not to download objects when you use the browser.
Enable Cookies – Edit Ringer Shuffle From Cookies, turn the cookies for the browser on or off. 1. From Ringer Shuffle, select Edit. 2. Select Add (to include the file in the shuffle) or Remove (to remove the file from the shuffle). 3. When finished, select Options > Done. From Link Referral, choose whether or not to allow link referrals when you use the browser. Edit Search URL From Edit Search URL, modify the default search page.
You can also press and hold the # Q key to toggle between Vibrate Only mode and Normal Sounds mode. Note: The phone rings when attached to an external power source (such as a charger), even if all sounds have been silenced. Set Power On/Off Sounds Volume Keypad From Volume, you can modify the following settings. From Keypad, you can modify the following settings. Set Ringer Volume Set Key Press Sounds T 1. From Pwr On/Off Sound, select Power On Sound or Power Off Sound. 2.
Enable Wallpaper Shuffle From Wallpaper Shuffle, select Enable to turn on wallpaper shuffle. Edit Wallpaper Shuffle 1. From Wallpaper Shuffle, select Edit. 2. Select Add (to include a file in the shuffle) or Remove (to remove a file from the shuffle). 3. When finished, select Options > Done. View Wallpaper Shuffle Set Theme From Themes, select a color theme for the display background.
Backlighting Set Time and Date Format Set Display Duration From Date/Time Format, select a time and date format. Convenience Use these settings to make your phone more convenient to use. Set Date and Time In Airplane mode, you can set the time and date manually. Note: You can only access Set Date/Time with Airplane Mode enabled. 1. From Set Date/Time, do the following to change the date: – Scroll left or right to move between the month, day, and year fields.
Enable Auto Keyguard D R Use Auto Keyguard to automatically lock the keypad after 30 seconds of inactivity to prevent accidental key presses. From Auto Keyguard, select Enabled or from the home screen, press and hold the Back key. Unlock Keyguard From the home screen, select Unlock and press the Back key to unlock the keypad.
– Exit to exit. The next time a call comes in, you can place it on hold. 2. From the home screen, press the keys corresponding to the letters of the name you want to find. A matching contact or speed dial entry appears. 3. Scroll to your desired contact and press the Send key to call the number. Place a Call on Hold Enable Frequent List T From Frequent List, select Enabled. With Frequent List enabled, the last 15 of your most frequently called contacts appear at the beginning of your contacts list.
Customize Keys Set Expert Mode You can modify the Navigation key and Left softkey settings to set up your desired shortcut. 1. From Customize Keys, select UP Key, LEFT Key, RIGHT Key, DOWN Key, or Left Soft Key. 2. Select your desired menu option for the targeted key shortcut. Use Expert Mode to speak a command after you hear a tone instead of following the initial voice prompts. From Expert Mode, select one of the following: • Normal sets the phone to default voice prompts.
Voice Answer 2. Follow the prompts for each number until training is complete. Note: You must read the numbers digit by digit for voice training to work. Enable Voice Answer Set Headset Sounds With a headset attached to your phone, you can play the ringer through the headset or phone speaker. From Headset Sounds, select Out of Phone (ringing from the phone speaker) or Out of Headset (ringing from the headset).
Connect to Hearing Aid Device Use this setting if you want the phone to alert you when you roam outside of your home service area. From Roam/Svc Alert, select one of the following: • Disabled turns roaming service alert off. • When No Svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.
Set Web Alerts You can set an alert to confirm the start or end of a browser session. From Web Alert, select one of the following: • At Start prompts when you start a session. • At End prompts when you end a session. • Both prompts when you start and end a session. • No Prompts sets for no prompts. Set Location Information Enable Roaming Call Alert Use Location to share your location information with network services other than emergency services (for example, 911, 111, 999 and 000) in serviced areas.
Lock Phone Change Lock Code Set Lock Phone Change your lock code from the default. 1. From Security, enter your four-digit lock code. 2. Select New Lock Code > Yes. 3. Enter a new four-digit code. 4. Re-enter your new lock code. Unlock the Phone R 1. From the home screen, select Unlock. 2. Enter your four-digit lock code. Set Limit Calls Phone Info T View Version Information Select Build Info to check your phone’s software and hardware information.
13 Downloads Download an Application Your Kyocera phone has the added ability to download and manage applications through BREW. BREW brings you the full range of applications and services you have come to expect from the Internet: Email and instant messaging, real-time navigation services, group chat, games, relevant news, and much more. You connect to the server, download applications, and then manage them as you like.
14 Tools & Games Tools & Games Menu Select Tools & Games from the main menu to access the following functions: Level 2 > Level 3 Tools & Games Brick Attack Play Brick Attack. Voice Memo Access these options: Record New and Recorded Memos. Scheduler Schedule an appointment. Alarm Clock Set an alarm. AF T Level 1 > Tip Calculator Calculate a tip. Calculator Perform basic calculations. Timer Set a countdown timer. Use a stopwatch timer.
Voice Memo Use Voice Memo to record and play back audio memos. Record Voice Memos R 1. From Recorded Memos, highlight a memo. 2. Select Play to play the memo or Options to access more features. Scheduler 1. From Calculator, enter the first number. 2. Select a mathematical operation: – Scroll left to multiply. – Scroll right to divide. – Scroll up to add. – Scroll down to subtract. Your selection will appear highlighted. 3. Enter the second number, and press the OK key to view the result. 4.
Use Timer Write a Memo 1. From New Memo, enter the memo. 2. Select Save. View a Memo From View Memos, select View to open a memo or Options to access more features. Edit a Memo 1. From View Memos, highlight a memo. 2. Select Options > Edit. 3. Edit the memo, and select Save. D R AF The timer counts down for the specified time. It beeps when that amount of time has elapsed. 1. From Timer, select Set. 2. Enter the time length. – Scroll left or right to move between hours, minutes, or seconds fields.
2. Select Options > Lock Memo. To unlock a memo, select Unlock Memo. Erase a Memo 1. From View Memos, highlight a memo. 2. Select Options > Erase > Yes. From View Memos, select Options > Erase All > Yes. Note: Selecting Erase All only erases unlocked memos. AF World Clock T Erase All Memos Use World Clock to check times in cities around the world in relation to your local time. Set World Clock D R 1. From World Clock, first scroll left or right to select a time zone. 2.
15 Bluetooth Enable Bluetooth R Before you can connect your phone with a Bluetooth device, you need to enable the Bluetooth feature on your phone. From On/Off, select On. D Pair with a Device To enable your phone to communicate with a Bluetooth device, you need to "pair" the device with your phone. The following instructions describe the process. You may also need to reference the user guide provided with your Bluetooth device. 1.
Rename a Device Limit Visibility 1. From My Devices, highlight a device. 2. Select Options > Rename. 3. Enter a new name and select Save. By default your phone is always visible, if set to visible mode. You can limit the time your phone is visible to other Bluetooth devices. From Visibility, select an option to set the phone visible for your selected time before becoming invisible. Delete a Device You can delete a Bluetooth device that you have paired your phone with. 1.
16 Voice Commands Call a Contact 1. From the home screen, press and hold the Send key. The phone prompts, “Say a command”. 2. Say “Dial Number” and then speak the digits of the number you want to call. If you pause, the phone prompts you, “Did you say ” or “Say a number” if it does not recognize the name. Say “Yes” to make the call, “No” to cancel the phone call. 3. Press the End key to end the call. D R AF 1. From the home screen, press and hold the Send key.
Find a Contact D R AF T 1. From the home screen, press and hold the Send key. The phone prompts, “Say a command”. 2. Say “Find Contact”. The phone prompts, “Say a name”. The phone prompts, “Please repeat” or “Say a name” if it does not recognize the name. If the name you spoke matches a contact in the voice dial list, the phone prompts: “Name, correct?” Say “Yes” to display the contact, “No” to select a similar name, or “Cancel” to cancel the search.
17 Get Help From Phone Info, select User Guide to access the user guide for your phone. You can also find the user guide at www.kyocera-wireless.com/support. Customer Support D R AF Your service provider’s customer support department may be accessible directly from your phone when you dial a number, such as *611 (check with your service provider). They can answer questions about your phone, phone bill, call coverage area, and specific features available to you, such as call forwarding or voicemail.
Index Numerics 1-touch dialing, 62 AF D R accessories, 78 headsets, 65 T-coil hearing aid, 66 TTY device, 65 airplane mode, 62 set date and time, 61 alarm clock, 33 snooze reminder, 33 alerts browser, 67 calls, 35, 58 lights only, 58 messages, 47 minute, 63 missed calls, 63 pages, 48 roaming, 58, 66, 67 scheduler, 55 vibrate, 58 voice privacy, 66 voicemail, 48 applications, 69 downloading, 69 auto-hyphenation, 62 T A B backlighting, 61 banner, 60 battery charging, 9 drain, 10 User Guide installing
secure prompt, 57 select images, 57 timeout, 57 AF D R calculator, 71 calendar, see scheduler call history, see call lists call lists all, 29 erasing, 30 incoming, 29 missed, 30 outgoing calls, 29 saving numbers, 30 sending messages, 30 viewing contacts, 30 call logs, see call lists call timers all, 31 data, 31 home, 31 incoming, 31 outgoing, 31 recent, 31 roaming, 31 caller IDs, 35 calls alerts, 58 answering, 16 any key answer, 63 auto answer, 65 call lists, 29 emergency, 17, 18 ending, 16 limiting, 68
web addresses, 25 contacts list, 22 conventions, using this guide, 15 countdown timer, 72 customer support, 78 D data counter, 31 display, 59 brightness, 61 language, 61 time and date, 61 downloads, 69 help, 69 drafts folder, 41 fast find, 63 frequent list, 63 G I D games Brick Attack, 70 groups adding, 26 adding contacts, 25 assigning alerts, 27 assigning pictures, 27 editing, 26 erasing, 27 sending messages, 26 sending vCard, 27 viewing, 26 groups list, 26 User Guide icons, 12 images erasing, 37 sen
T attaching sounds, 41, 42 callback number, 43, 49 calling numbers, 45 checking status, 46, 47 completing drafts, 41 creating, 39 delivery receipts, 43, 49 erasing, 49, 50 forwarding, 44 incoming calls, 39 list view, 48 locking, 45 online locations, 40 playing attachments, 45 previewing, 42 read receipts, 44 recent calls, 40 recent list, 40, 50 replaying, 46 replying, 44, 45 saving, 45, 49 saving addresses, 40 saving attachments, 45 saving drafts, 40 saving preset text, 41 sending later, 43 setting pri
writing language, 42 missed calls, 30 multimedia, 34 multimedia messages, 39 auto retrieve, 44, 49 CC/BCC fields, 49 prompt, 44 user guide, 68, 78 picture messages, see multimedia messages pictures erasing, 37 frames, 52 sending, 34 slideshow, 37 taking, 42, 51 viewing, 52 power on sounds, 59 preset text, 41, 48 primary number, 25 product evaluation, 78 N T navigation shortcuts, 11, 64 notifications messages, 44 voicemail, 46 number prefixes, 25 number types, 24 Q OBEX authentication, 75 outbox, 47 ou
stopwatch, 72 support, customer, 78 T 84 T T-coil hearing aid, 66 teletype device, 65 text entry, 19, 21 modes, 19, 49 numbers, 19 text messages, 39, 44 themes, 60 timer, 72 tip calculator, 71 tools, 70 alarm clock, 33 calculator, 71 memopad, 72 scheduler, 53 stopwatch, 72 timer, 72 tip calculator, 71 voice memos, 71 world clock, 73 AF D R event reminders, 55 finding dates, 54 finding events, 54 month view, 53 sending events, 54 silent mode, 55 snooze duration, 33 sorting events, 54 work hours, 55 sc
T AF W D wallpaper shuffle activating, 60 editing, 35, 60 time interval, 60 viewing, 60 wallpapers, 35, 59 web browser, 32 world clock, 73 R digit lengths, 64 editing, 28 voice dialing, 17 voice memos, 71 playing, 35, 71 recording, 71 voicemail alerts, 48 changing number, 50 checking, 46 configuring, 46 volume adjusting, 17 earpiece, 59 keypad, 59 ringers, 59 speakerphone, 59 User Guide 85
D T AF R
T AF R D User Guide 87
T AF R D Kyocera Communications Inc. www.kyocera-wireless.com 82-A6074-1EN, Rev.