User's Manual

Manual instruction

Hardwareinstallation
1. InstalltwoAAABatteriesintothemouseandtwoAAAbatteriesintothekeyboard.
2. PlugintheUSBreceivertoaUSBportonyourPC.



IDChannelSettingandconnection:
Afteryouinstallthereceiver:
1. Wait about 5‐10 seconds and the connection will be executed and the kit will be ready for
use.
2. Foroptimumperformance,makesurethatthedistancebetweenthewirelessdeviceandthe
receiverdoesnotexceed10M.


ReplaceBatteries
If the mouse or keyboard does not work properly, then the batteries have lost their charge, so
youneedtoreplacethem.
Warning:donotmixorusedifferenttypesofbatteriesatthesametime.

MouseButtonAssignments
1. LeftButton:Providestraditionalmousefunctionslikeclick,
doubleclickanddrag.
2. Magic‐Roller:Scrollthebuttontosurftheinternetandwindowsdocuments.
3. RightButton:Providestraditionalmouserightclickfunction.


FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or