User's Manual

ManualsBrandsKYE Systems ManualsComputers & AccessoriesWIRELESS KEYBOARD

Table Of Contents

Mouse Factory Setting
- Notes on Battery Usage

ENGLISH

Hardware Installation

1. Install two AA batteries each into the mouse and keyboard.

2. Plug in your USB receiver to a USB port of your PC.

3. Turn on your PC.

Software Installation

1. Place your CD driver in your PC drive for software installation

2. Follow the instruction on the screen to finish the software

installation

Replace Batteries

When mouse or keyboard does not work properly, then the batteries

have lost their charge, so please replace them.

(Warning: please do not mix or use different types of batteries at the

same time)

Summary of content (7 pages)

PAGE 1
ENGLISH Hardware Installation 1. Install two AA batteries each into the mouse and keyboard. 2. Plug in your USB receiver to a USB port of your PC. 3. Turn on your PC. Software Installation 1. Place your CD driver in your PC drive for software installation 2. Follow the instruction on the screen to finish the software installation Replace Batteries When mouse or keyboard does not work properly, then the batteries have lost their charge, so please replace them.
PAGE 2
ENGLISH ID Channel Setting The channel ID is factory preset. The green LED (data transmission indicator) will be lit constantly when the wireless device is in normal operation. In case your wireless devices do not work, please reset the ID channel by: 1. Press the connect button on the receiver and the LED will be blinking for connection. 2. Press the connect button of the wireless device once within 20 seconds and observe if the LED light on the receiver has gone off.
PAGE 3
ENGLISH is locked. Also set your password for unlock computer. Then, press “OK”, and the security setting will be finished. 4. If you want to start the security function, just press “ ”, and the picture you set pop up to hide the screen. For security, the mouse and keyboard won’t work. 5. If you want to unlock this function, just ”again, and install your press password. “Warning 1. (Trouble shooting) The wireless desktop set provides 256 ID codes, and it selects the ID # for your wireless devices.
PAGE 4
ENGLISH 2. Although that the mouse has granted the eye safety certification, it is strongly suggested that a direct eye contact with the laser lens should be avoid. 3. To use MSN and Lock function, it requires software to be installed. 4. To re-program for other media programs, software installation is required. Mouse Factory Setting Button Assignments 1. 2. 3. Left Button: Provides traditional mouse functions like click, double click and drag.
PAGE 5
ENGLISH Horizontal Scroll: Press the roller to the left and the cursor scrolls to the left; press the roller to the right and the cursor scrolls to the right. 4. 5. Security: Lock your screen, mouse and keyboard unless you install the password. Power indicator: If your battery power is low, the LED will brighten. Keyboard hot key definition 1. 2. 3. 4. 5. 6. 7.
PAGE 6
ENGLISH 10. Stop: Stop playing music or video sources 11. Volume Down: Decrease volume level 12. Play/Pause: Play/Pause the music or video sources. Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect the battery performance.
PAGE 7
ENGLISH THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT ESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.