Instruction Manual

ManualsBrandsKWorld ManualsPlayersM102

ONE Introduction

..............................................................02

1.1 Features

..............................................................02

1.2 Specification

........................................................03

1.3 Package Contents

................................................03

1.4 Remote Control Guide

.............................................04

1.5 Introducing the Unit

.................................................05

1.6 Connection Diagram for YPbPr

.........................................06

1.7 Connection Diagram for HDMI

...........................................07

TWO Activating the Media Player

...................................08

2.1 Setting Up Your KWorld Media Player M102

.................10

2.2 System Settings

.............................................................10

2.3 Getting Started With Your Media Player M102

...................12

2.4 Format Factory........................

...................................16

2.5 Updating a firmware file?

..............................................16

THREE FAQ

..............................................................17

Contents V1.1

Technical Support

Thank you for reading this manual. If there is any further inquiry, please contact us at www.kworld-global.com

The information contained in this documentation is for reference only. The text, images and charts of this

documentation have been processed with intensive care and we have been dedicated to ensure the accuracy

and completeness. However, the content of this document is subject to change without notice and no liability

nor responsibility is assumed for any loss or damage arising from any kind of misunderstood, improper uses of

the hardware, software, and documents.

KWorld Computer Co., Ltd.

6/F, No. 113, Jian 2nd Road

Jhonghe City, Taipei County 235

Taiwan (R.O.C.)

http://global.kworld-global.com

trademarks of KWorld Computer Co., Ltd. All other trademarks and logos presented in this material are the

property of their respective owner. KWorld Computer Co. Ltd. reserves the right to revise the specications

mentioned above. No part of this documentation can be copied, reproduced or distributed in any kind of print or

electronic forms without legal permission.

Summary of content (20 pages)

PAGE 1
Contents V1.1 ONE Introduction ..............................................................02 1.1 Features ..............................................................02 1.2 Specification ........................................................03 1.3 Package Contents ................................................03 1.4 Remote Control Guide .............................................04 1.5 Introducing the Unit .................................................05 1.6 Connection Diagram for YPbPr.......
PAGE 2
ONE 2 Instruction Introduction Thank you for purchasing the KWorld Media Player M102 and you will be able to enjoy digital entertainment on the big screen in your living room. This manual will guide you through all of the installation and instruction. You will be able to use many of the exciting and useful features that make your multimedia experience more enjoyable than ever. 1.1 Features • A light and compact device. • User-friendly OSD control.
PAGE 3
1.2 Specifications TV System PAL/NTSC HDD Partition FAT32,NTFS Max output Resolution HDMI/YPbPr:720P System I/O Card reader * 1 IR Receiver * 1 USB Host * 1 (USB2.0) Power Jack * 1 YPbPr output RCA * 3 AV output CVBS output RCA * 1(The Y connector) Audio L/R RCA * 2 HDMI connector Card Reader SD/SDHC/MS Power Adaptor AC102-240V 50/60Hz 5V 2A Support Media format AVI/MP4(Divx,Xvid),Mpeg 1/2, RM, RMVB, DAT, MOV(not H.
PAGE 4
1.4 Remote Control Guide Key Function Mute: Enable/Disable Mute function. Power on/off: activate Stand by mode Movie: Enter Movie page. Music: Enter Music page. Photo: Enter Photo page.
PAGE 5
1.5 Introducing the Unit: This media player is built with touch buttons and ports on the media player unit. Front Panel Exit: exit from the currently accessed page move right on the menu (enter sub-directory) move left on the menu (back to previous directory) move up on the menu move down on the menu OK: confirm your selection or access to an item on the menu Side Panel TheYPbPr output ports to plug in the YPbPr (green, blue, red) cables.
PAGE 6
1.6 Connection Diagram for YPbPr 1. Take out the media player unit from the product package. 2. Plug the YPbPr (the green, blue and red ones) and the audio (the white and red ones) cable to the YPbPr and audio input ports of the unit. Notes: the YPbPr cables are for video display and the audio cable is for the output of sound. a. The output ports for audio Audio cable (white and red) YPbPr cables (green, blue and red) The YPbPr output ports of the unit b.
PAGE 7
3. Insert a USB device to the USB port at the rear of the unit for the source of files and plug the power adapter. Plug the power adapter included in the package The USB port for inserting an USB device 1.7 Connection Diagram for HDMI 1. Plug in the HDMI cable into the HDMI port of the media player. Connect another end of the HDMI cable to your TV. The HDMI outputs both high definition image and sound, so you don’t need to plug audio cables if you connect with HDMI cable.
PAGE 8
TWO 8 Activating the Media Player 1. Once you have followed the steps above (in the Connection Diagram for YPbPr or the Connection Diagram for HDMI section) to set up the media player properly, please turn on your TV. 2. When you turn on your TV, you must switch the “VIDEO” source for your TV FIRST. You can either do it with the remote or the buttons on your TV set. Tip: your remote should have a button with a function like the video source switch, as the picture shown below.
PAGE 9
4. The main screen will appear on your TV once you have switched to the appropriate video source. However, it is possible to encounter the “black screen” like the figure at the right. Tips to solve this problem: a.Since the default output mode of the media player is “PAL Composite”, you can connect with AV cables in order to see the picture on the screen, though be in lower picture definition with approximately 480i.
PAGE 10
2-1. Setting up Your KWorld Media Player M102 1.If you have inserted an USB device to your media player unit, the main screen will appear with an USB icon. That means you can access to your USB device that is connected to the media player unit to search and playback files. 2-2. System Settings Once you have entered the “SETTINGS” page, you will see the following options: Language: Please use the ◄/► key on the Remote to select your preferred language, then press “OK” to confirm.
PAGE 11
Music repeat Mode: You can set the Music Play Mode as “Repeat one” or “Repeat All”. Please use the ◄/► key on the Remote to select which one you prefer, then press “OK” to confirm. Movie repeat Mode: You can set the Video Play Mode as “Repeat one” or “Repeat All”. Please use the ◄/► key on the Remote to select, then press “OK” to confirm. Display Mode: Set the display ratio based on your TV screen ratio. Please use the ◄/► key on the Remote to set the proper ratio, then press “OK” to confirm.
PAGE 12
Autorun: You may enable or disable the auto play function. Please use the ◄/► key on the Remote to set your preference, then press “OK” to confirm. File Sort mode: You can choose how your files are sorted by “Name/Size/Time”. Please use the ◄/► key on the Remote to select the proper TV setting, then press “OK” to confirm. Default: To return to the default settings. Simply select it, then press “OK” to confirm. 2-3.
PAGE 13
1.Movie: Please select the Movie icon on the Main Menu and press “OK” key to enter the video file list. Choose a video file, and proceed to the full screen play mode. For Video Playback: Use the “▼/▲” key on the Remote to select the video file and press “OK” to play or press the “Exit” key to return to the previous page and back to the file listing. In full screen mode, press the “OK” key on the Remote to enable the Video Control Bar. Use the “◄/►” key to select the icon and press “OK” to confirm.
PAGE 14
Memory and Resume Functions for Videos: When you are watching a video, you can press the ” ” button on your remote to activate the video memory function. There will be a icon appearing on the top right corner of the screen. This icon indicates that the media player has memorized the part of video you are currently watching. If you want to resume to the part of video that you have memorized, just press the button on the remote.
PAGE 15
Background Music: You can play background music during the photo slideshow by pressing “BGM” key on the remote. 4. Text: Select the Text icon on the Main Menu and press the “OK” key to enter Text file listing page. For Text Files Viewing: Please press the “▼/▲” key to select text files and press “OK” to start full-screen mode. Use the “▼/▲” key on the Remote to scroll up and down the text file. 5.File: Select the File icon on the Main Menu and press the “OK” key to enter File Listing page.
PAGE 16
2-4. Format Factory KWorld has included a multi-functional media converter – Format Factory as a bonus software that you can easily convert your video, audio and picture files from one format to another. This software supports 48 languages and file conversion in MP4, 3GP, MPG, AVI, WMV, FLV, SWF, MP3, WMA, AMR, OGG, AAC, WAV, JPG, BMP, PNG, TIF, ICO, GIF, and TGA. You can also rip DVD into a video file or input RMVB files for your source files for conversion.
PAGE 17
THREE 17 FAQ Q1: Why can’t I enter the Main Menu, or the Start-up Screen looks different? A1: Please follow the steps below: 1. Please check the connections. Have you properly connected all of the necessary cables? (For example, the power cord for your KWorld Media Player M102.) 2.
PAGE 18
Q7: How do I create subtitle files in SRT format with ANSI encoding? A7: Since Media Player M102 only supports subtitle files in ANSI encoding format, please follow the steps below: Please open the subtitle file with Notepad (a program that comes with your Windows Operating System). Click on the Files Menu and select the “Save As” option. Please change the Encode option to ANSI encoding and click on Save to proceed.
PAGE 19
End-user License Agreement Please read this agreement carefully before using the product: Please ensure: (1)Do not dismantle the product for improper purposes. (2)Do not read and refresh the firmware of the product by improper means. (3)Do not conduct inverse engineering and disassembling for related software and codes of the product (4)The product and this license agreement can be transferred to a third party who accepts the terms and conditions of the agreement.
PAGE 20
WARNING This User’s Manual is for specific product, and all its contents are processed with due care but are not ensured fully correct. We assume no responsibility for any loss arising from use of this manual. The right to interpret all contents of this User’s Guide belongs to the company. The manual is subject to change without notice. This User’s Manual is not authorized to any party and no reproduction or copy, in part or whole, of the manual in any way is permitted. KWorld Website: www.