BATTERY POWERED PA PA40BAT / PA40BATBT Congratulations on the purchase of your Kustom Battery Powered PA. Kustom PA40BAT and PA40BATBT Models draw on decades of amp design and manufacturing experience at Kustom. These products were built from the ground up to offer world-class tone, useful features and reliable performance. Inside this manual, you’ll find valuable information about your product’s controls and specifications. Being familiar with its features will help you effectively use your system.
IMPORTANT SAFETY INSTRUCTIONS Danger Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S.
IMPORTANT SAFETY INSTRUCTIONS FRENCH 1. Danger L‘exposition a des niveaux eleves de bruit peut provoquer une perte permanente de l’audition, Chaque organisme humain reagit differemment quant a la perte de l’audition, mais quasiment tout le monde subit une diminution de I’acuite auditive lors d’une exposition suffisamment longue au bruit intense.
CONTROLS & FUNCTIONS OVERVIEW 1 2 3 4 5 6 7 1. AUX IN: Use this stereo input to connect an external audio device such as an MP3, CD player or computer for playback. Note: Right and Left channels are summed to mono on this input. 2. MIC Input: This XLR input is designed for low-impedance microphones or equipment that has a mic-level, balanced output. Note: This input sends 9-volt phantom power. This is used to provide power to condenser microphones.
SYNC 1 2 3 4 6 5 7 PA40BATBT: BLUETOOTH PAIRING INSTRUCTIONS To connect your Bluetooth device to the Kustom Bluetooth receiver for the first time, navigate to the Bluetooth settings menu on you Bluetooth enabled device. Ensure that Bluetooth is enabled and your Kustom product is powered on. Perform a scan for available devices. Select and pair to the Kustom product in the list of available devices. Enter 0000 for the passcode if prompted. Once paired, a connection can be established.
BATTERY: IT IS RECOMMENDED THAT THE BATTERY BE RECHARGED AFTER USE TO PROLONG THE BATTERY LIFE. FREQUENT CHARGING WILL NOT HARM YOUR BATTERY, AND WILL ENSURE THAT THE BATTERY IS FULLY CHARGED AND READY FOR ITS NEXT USE. STORING BATTERY NOT FULLY CHARGED WILL SHORTEN BATTERY LIFE. -Always charge for 12 full hours after heavy use. -The battery does not need to be fully discharged before recharging. -It is recommended to stop using the unit under battery power when red Battery Level LED is on.
BATTERY REPLACEMENT The battery will need to be replaced when the unit fails to charge. Carefully follow the installation instructions for battery replacement. Perform battery replacement in a safe place, away from children. Remove the four screws in the lower portion of the rear of the cabinet & remove the battery panel. Holding the cabinet securely, carefully tilt the it backwards. The battery should slide out of it’s compartment. Disconnect the two wires attached to the battery.
MIC XLR LINE 1/4" 2 LINE 1/4" S T CS CN R Phantom Power 9V BLUETOOTH AUX 1/8" 1 GAIN GAIN volume volume CHANNELS low low high high OUT IN SYNC MASTER LINKING BUS MASTER Conditioning HORN Crossover + _ + _ + _ SPEAKER POWER AMPs SPEAKERS PA40BAT & PA40BATBT SIGNAL FLOW DIAGRAM MAIN BUS
EC Declaration of Conformity We: Kustom Musical Amplification INC. 3015 Kustom Drive Hebron, Ky 41048 Tel: 1-859-817-7164 Fax: 1-859-817-7199 Declare that the product Product name: Kustom Product model numbers: PA40BAT PA40BATBT to which this declaration relates is in conformity with the following standards; EN55013: 2001/+A1: 2003+A2: 2006 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.
PA40BAT / PA40BATBT OWNER’S MANUAL www.kustom.
