DAWN100BT OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS Danger Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S.
IMPORTANT SAFETY INSTRUCTIONS FRENCH 1. Danger L‘exposition a des niveaux eleves de bruit peut provoquer une perte permanente de l’audition, Chaque organisme humain reagit differemment quant a la perte de l’audition, mais quasiment tout le monde subit une diminution de I’acuite auditive lors d’une exposition suffisamment longue au bruit intense.
6 6 5 5 4 4 2 3 7 1 9 8 10 11 12 13 14 BLUETOOTH PAIRING INSTRUCTIONS: To connect your Bluetooth device to the Dawn Bluetooth receiver for the first time, navigate to the Bluetooth settings menu on you Bluetooth enabled device. Ensure that Bluetooth is enabled and your Dawn product is powered on. Perform a scan for available devices. Select and pair to the Dawn product in the list of available devices. Enter 0000 for the passcode if prompted. Once paired, a connection can be established.
CONTROLS & FUNCTIONS OVERVIEW INPUT SECTION: This is where you may plug in microphones, instruments, keyboards, drum machines and other audio devices, adjust the volume, bass and treble. 1. MIC Inputs: These XLR inputs are designed for low-impedance microphones or equipment that has a mic-level, balanced output (often called a Direct Out). Note: These inputs receive 15-volt phantom power. This is used to provide power to condenser microphones.
3 2 1 AUX MIC LINE MIC LINE Bluetooth Receiver Phantom Power 15V Phantom Power 15V GAIN GAIN low low low high high high Aux Input Disables Bluetooth volume volume volume CHANNELS OUT IN SYSTEM LINK MASTER LINKING BUS MASTER SUB LP Filter Conditioning Hi Pass Filter (HPF) HORN POWER AMP + _ + _ _ + _ + + _ LO SUBWOOFER OUT Inserting 1/4" mono (tip/sleeve) SHIELDED instrument cable into subwoofer out jack activates HPF.
DAWN100BT Specifications Output Power 1% Accepted Inputs Frequency Response Hum & Noise System Gain (Measurements made at 1kHz) Channel EQ (high, low) SYSTEM LINK (IN and OUT) Subwoofer Out Phantom Power Power Requirements Speakers Horn Power Capacity Frequency Response Nominal Impedance Bluetooth Module Features Dimensions & Weight 100W CH 1 and 2 CH3 4 Ohm load Mic XLR Balanced, Line level 1/4" Un-balanced 1/8” Line Level or Bluetooth Device Actual response is tailored to speaker cabinet for 20HZ-20kHz
EC Declaration of Conformity We: Kustom Musical Amplification INC. 3015 Kustom Drive Hebron, Ky 41048 Tel: 1-859-817-7164 Fax: 1-859-817-7199 Declare that the product Product name: Dawn Product model number: DAWN100BT to which this declaration relates is in conformity with the following standards; EN55013: 2001/+A1: 2003+A2: 2006 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.
DAWN100BT OWNER’S MANUAL DAWNPROAUDIO.
