DAWN50BT OWNER’S MANUAL
FCC ID: 2AAVGHMG00050; IC ID: 11349A-HMG00050
Caution: This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
IMPORTANT SAFETY INSTRUCTIONS Danger Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S.
IMPORTANT SAFETY INSTRUCTIONS FRENCH 1. Danger L‘exposition a des niveaux eleves de bruit peut provoquer une perte permanente de l’audition, Chaque organisme humain reagit differemment quant a la perte de l’audition, mais quasiment tout le monde subit une diminution de I’acuite auditive lors d’une exposition suffisamment longue au bruit intense.
6 5 5 4 4 2 3 7 1 9 8 10 11 12 13 14 BLUETOOTH PAIRING INSTRUCTIONS: To connect your Bluetooth device to the Dawn Bluetooth receiver for the first time, navigate to the Bluetooth settings menu on you Bluetooth enabled device. Ensure that Bluetooth is enabled and your Dawn product is powered on. Perform a scan for available devices. Select and pair to the Dawn product in the list of available devices. Enter 0000 for the passcode if prompted. Once paired, a connection can be established.
CONTROLS & FUNCTIONS OVERVIEW INPUT SECTION: This is where you may plug in microphones, instruments, keyboards, drum machines and other audio devices, adjust the volume, bass and treble. 1. MIC Inputs: These XLR inputs are designed for low-impedance microphones or equipment that has a mic-level, balanced output (often called a Direct Out). Note: These inputs receive 15-volt phantom power. This is used to provide power to condenser microphones.
DAWN50BT Specifications Output Power 1% Accepted Inputs Frequency Response Hum & Noise 50W 8 Ohm load Channels 1 and 2 Mic XLR Balanced, Line level 1/4" Un-balanced Channel 3 20HZ-20kHz Actual response is tailored to speaker cabinet for accurate acoustical response.
AUX 3 MIC LINE 2 MIC LINE 1 Bluetooth Receiver Phantom Power 15V Phantom Power 15V GAIN GAIN low low low Aux Input Disables Bluetooth volume volume volume CHANNELS high high high OUT IN SYSTEM LINK MASTER MASTER SUB LP Filter Conditioning Hi Pass Filter (HPF) HORN POWER AMP + _ + _ + _ Crossover SUBWOOFER OUT j LO Inserting 1/4" mono (tip/sleeve) SHIELDED instrument cable into subwoofer out ack activates HPF.
EC Declaration of Conformity We: Kustom Musical Amplification INC. 3015 Kustom Drive Hebron, Ky 41048 Tel: 1-859-817-7164 Fax: 1-859-817-7199 Declare that the product Product name: Dawn Product model number: DAWN50BT to which this declaration relates is in conformity with the following standards; EN55013: 2001/+A1: 2003+A2: 2006 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.
DAWN50BT OWNER’S MANUAL DAWNPROAUDIO.