KU NA KN A-CWP-BK-01 l Camera Wall Plate INSTRUCTION MANUAL Learn more or need support? Visit help.getkuna.
PACKAGE CONTENTS DESCRIPTION QUANTITY A Camera Wall Plate 1 B Camera Wall Plate Bracket 1 © Camera Bar Bracket 1 D 2) long and (2) short screws for Camera Wall Plate Bracket 4 E Wire nuts 3 F Fixture holding hook 1 UL INFO suitable for Wat Locations, suitable for mounting with 4 ft of ground. The camera wall plate is designed to be used with a compatible light fixture. To be compatible, the light fixture should a. support standard AC power and a standard light bulb (SOW maximum), and, b.
INSTALLATION Tuna App = r = Before installation, on your iOS or Android smartphone, please visit to download and Install our free Tuna App. Follow In-app Instructions to set up your Tuna Camera Wall Plate at Stop 7. [] 1 Disconnect power at fuse or cultural breaker Places CWP onto the two posts protruding from before Installing the CWP. Tightly attach the CWP bracket. Level the CWP and fully proprietary CWP mounting bracket ta junction tighten two adjustment screws referenced in box.
Now that the wiring is connected, mount your light fixture of choice to the CWP following the Instructions for your specific light fixture. Install alight bulb If necessary. (maximum wattage: SOW) Typically, you wll slide the light fixture over two screws attached to the mounting bracket, and secure the light with decorative nuts. We strongly recommend you use silicone caulking to seal the gap between the wall and the Camera Wall Plate, as well as the gap between the Light Fixture and the Camera Wall Plate.
Get powered. Get the app. Welcome to the next generation in smart security FA [§ i] Your Tuna Camera Wall Activate your CWP now! Create your account and Plate Installs In minutes Visit to connect your light. using existing wiring. It’s download the Tuna app powered by the Tuna app on your Apple or Android for wireless Intelligence. mobile device.
FCC STATEMENT KN A-CWP-BK-01 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could cold the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.