User's Manual

ManualsBrandsKTV Global ManualsElectronicsFM Transmitter

6 . 4

TFT LCD TELEVISIO

OPERATING INSTRUCTIONS

PROFESSIONAL INSTALLATION ONLY

MODEL : LSM64

FOR RV-SPECIFIC DC-ONLY OPERATION

PLEASE READ THIS ENTIRE OWNER’S

MANUAL BEFORE USING THIS LCD TV.

IMPORTANT NOTE :

WHEN USED IN A VEHICLE, THIS SYSTEM IS INTENDED PRIMARILY AS A MONITOR FOR A VIDEO

CASSETTE PLAYER, VIDEO GAME, OR CAMERA.

TELEVISION BROADCAST RECEPTION WILL BE ADVERSELY AFFECTED BY CONDITIONS SUCH AS

MOTION, CHANGE OF DIRECTION, ATMOSPHERIC ACTIVITY, AND LOCAL SURROUNDINGS.

IT IS THEREFORE LIKELY THAT BROADCAST PICTURE QUALITY WILL BE MARGINAL WHEN THIS

SYSTEM IS USED IN A MOBILE ENVIRONMENT.

MOBILE

APPLICATIONS

Ⓡ

"THIS PRODUCT HAS BEEN DESIGNED, MANUFACTURED

AND INSPECTED IN COMPLIANCE WITH THE ISO9001 QUALI-

TY ASSURANCE SYSTEM."

Summary of content (13 pages)

PAGE 1
MOBILE Ⓡ APPLICATIONS 6.4" TFT LCD TELEVISION OPERATING INSTRUCTIONS PROFESSIONAL INSTALLATION ONLY MODEL : LSM64 FOR RV-SPECIFIC DC-ONLY OPERATION PLEASE READ THIS ENTIRE OWNER’S MANUAL BEFORE USING THIS LCD TV. "THIS PRODUCT HAS BEEN DESIGNED, MANUFACTURED AND INSPECTED IN COMPLIANCE WITH THE ISO9001 QUALITY ASSURANCE SYSTEM." IMPORTANT NOTE : WHEN USED IN A VEHICLE, THIS SYSTEM IS INTENDED PRIMARILY AS A MONITOR FOR A VIDEO CASSETTE PLAYER, VIDEO GAME, OR CAMERA.
PAGE 2
CAUTIONS IMPORTANT SAFEGUARDS CAUTION : ·ANY CHANGES OR MODIFICATIONS IN CONSTRUCTION OF THIS DEVICE WHICH ARE NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE WARNINGS : ·TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ·DO NOT OPEN THE CABINET. DANGEROUS HIGH VOLTAGE IS PRESENT. SERVICING SHOULD ONLY BE PERFORMED BY QUALIFIED PERSONNEL. ·THIS LCD VIDEO SYSTEM SHOULD ONLY BE OPERATED WITH 12V DC.
PAGE 3
IMPORTANT SAFEGUARDS 13. Damage requiring Service-Unplug this product the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. lf liquid has been supplied, or objects have fallen into the product. c. lf the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions.
PAGE 4
FEATURES IDENTIFICATION OF SWITCH AND JACKS 6.
PAGE 5
ACCESSORIES REMOTE CONTROL USE Remote Control Please check to make sure that all of these items have been included. 1. TV/VIDEO BUTTON Press repeatedly to cycle program source selection between TV A/V1 IN & A/V2 IN & A/V3 IN. This button is duplicated on th remote control and TV/SET. 1 9 2 10 2. TV/CATV BUTTON This model is not supplied TV/CATV button function. 3. DIRECT CHANNEL SELECTION (0 ~ 9) BUTTONS Used for the direct selection of channels.
PAGE 6
REMOTE CONTROL USE SIGNAL CONNECTION • Connect the antenna lead to the ANTENNA Input terminal of the TV set. 75-ohm Coaxial Cable VHF/UHF ANTENNA EXT.Speaker (4 ohm) VIDEO GAME or VCP or DVD etc. Remote control Sensor KEC Mobile Applications VCP NOTES : Remote control should be directed at the remote control sensor on the TV. The maximum operating distance of the remote control is about 10 feet from the front of TV set.
PAGE 7
SIGNAL CONNECTION AUDIO SYSTEM • Audio output is Monophonic when receiving on-air broadcast signals. • Audio output is Stereo when a stereo audio signal is fed from external audio equipment that is connected to the [selected] A/V1 or A/V2, A/V3 Input terminals. • The SPEAKER JACK teminal is a high level output whose sound level is Variable up to 0.7W maximun when connected to a 4-ohm speaker.
PAGE 8
SET UP FOR CAR USE TV OPERATION INITIAL PREPARATIONS 1. LCD TV ASSEMBLY • Insert batteries into the Remote Control unit by following the "REMOTE CONTROL USE" section in this manual. • Connect the DC Cord to 12-Volt Power by following the "POWER CONNECTION" section in this manual. • Install LCD A ssembly with 4 screws. NOTES: The DC Power plug should not be accessible to the consumer.
PAGE 9
SET UP BUTTON SET UP BUTTON (1) AUTO PROGRAM On-Screen Display • When the on-screen display appears on the screen, it will disappear after several seconds. • The On-screen display may be unclear, shaky, or blurred when the System is in TV Mode and tuned to a channel where no program is being broadcast. • The On-screen display may be shown with or without a black background (except for Channel number). The MENU function allows you to perform basic settings for TV and Monitor status.
PAGE 10
PICTURE BUTTON SET UP BUTTON (3) FM MODE & FM FREQUENCY • Fuction to be able to listen to audio signal captured by TV set with car radio through FM antenna Procedure 1. Press the MENU button repeatedly to select the “FM MODE” item 2. Press the VOLUME (▲ ) button to cycle the on-screen menu between “OFF” “MODE1” and “MODE2”. 3. If FM MODE1 selected, “FM FREQ” can select 4 signal areas. (88.3MHZ, 88.7MHZ, 89.1MHZ, 90.3MHZ) 4. If FM MODE2 selected, “FM FREQ” cam select signal area from 88.3MHZ to 95.
PAGE 11
STATUS BUTTON MORE USEFUL FUNCTIONS By pressing the STATUS button on the Remote Control, you can sequentially select any one of four possible preferred picture settings. • As this button is repeatedly pressed, the mode will be changed as follows. (1) USER mode (2) STANDARD mode Press the Q. VIEW button on the Remote Control. Q. VIEW The previously viewed channel will appear on the screen. Press Q. VIEW again to switch back to the original channel. Repeatedly pressing Q.
PAGE 12
MORE USEFUL FUNCTIONS RECEPTION DISTURBANCE The most common types of television interference are as follows : (4) MUTE Button Press the MUTE button on the Remote Control. The audio from the program being viewed will be reduced almost to zero and "VOLUME 0" will appear on the screen. VOLUME 33 MUTE IGNITION NOISE: VOLUME Black spots or horizontal lines may appear, picture may flutter or drift.
PAGE 13
TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. For more information, see the corresponding page in this manual.