KTV. © APPLICATIONS MODEL: LAM-70 7" TFT LCD TELEVISION MONITOR/RECEIVER SYSTEM INSTALLATION INFORMATION & OPERATING INSTRUCTIONS FOR PR TONAL INST HN ON| THIS FOR SPECIFICATION 12 VOLT FL-ONLY OPERATION PLEASE READ ALL OPERATING INSTRUCTIONS BEFORE USING THIS PRODUCT. {PORTENT NOTE wi SED IN A VEHICLE, THIS SYSTEM 1S INTENDED PRIMARILY AS A MONITOR FOR A DIVES 2 PLAYER, DIVED Save, COR CAMERA, BEFORE Aga BROADCAST Pr rie QUALITY oh ii SYSTEM 1S USED fh A MOBILE ENVIRONMENT.
MEGS OR MODIFICATIONS i CONSTRUCTION OF THIS DEVICE WHICH ARE NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY 10 OPERATE THE EQUIPMENT, GS STOP T FIRE OR SHOCK HAZARD, BO NOT EXPOSE THIS UNIT TO GAIN OR MOISTURE. DO NOT GEN THE CABINET. DANGEROUS HIGH VOLTAGE IS PRESENT.
1, Read instructions-All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions-The safely and operating Instructions should be retained for future refer enter. 3. Heed Warnings-All warnings on the product and in the operating instructions should ba adhered to. . Follow Instructions-Sol calipering and use insinuations should be followed. 5. Cleaning-Unplug this product farm power cable connect before cleaning.
13. Damage requiring Service-Unplug this product the wall outlet and refer servicing © device ampersand under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been supped, oy objects have fallen info the product. ¢. ff the product has been exposed to rain or water, dl. ihe product dis nat operate normally by following the repeating Instructions.
7 INF TFT LCD Panel 12 Volt DC Operation Wiriness Nonvoter Control ATS Stereo Frequency Synthesizer Tuning System Full Foreseen Display of all Switching Fusions Full On-Noreen Display of all Picture Functions Automatic Power On, Automatic Power Off & Memory Power On Functions High Vegetate Protection {Over 18 ols DE} Polarity Reversal Protection Four Input Selections Builtin MTS Stereo TV Tuner, Stereo Audio Video Inputs 1,2, & 3) Low Laval Stereo Audio Video Outpatient Powered Stereo External Speakers Cuto
4 12¢ DU Power assignation cable $ External Speaker Extension Cable TERESA (ASA EXTENSION CABLE {Design may vary with packaging) + REMOTE CONTROL — $4 WARRANTY CARD 4 OWNERS MANUAL 4 CUTOUT TEMPLATE The following positional accessory is available from KEC Mobile Applications landlord ite distributors at additional coat: + HOUSING FRAME & INSTALLATION SCREWS {rer general and vehicle specific mounting and installation accessories are also available.
Bo + FRONT VIEW Mote ; The Yo lime (7+) Keys are also used for prole ad adjustments ant bore MEM items
Remote control sensor + “The Remote control soul! be directed at the Remote Control sensor Just below the LOD Screen as shown above, + The maximum operating distance of the Remote Control is about 10 feet. + The Remote Control should be kept sway from UV exposure which may disrupt its operation. + It may ba difficult to receive Remote Contra] signal wham LV is present.
External Peke: Extension Gable (15 foo) External Speaker PH ¢ 12V DC Input {4 oms x2) AN INPUTS KTV Mobile Hyphenation VCP Extension Cable Ha foot) SHE wr ANTENNA 75-0 Coaxial Cable AN DISPUTANTS GAME, CAMERA, DVD, ETC AV IMPUTE GAME, CAMERA OVD, ETC, Be sure 10 disconnect POWER before making sny connections.
SELECTING THE PROGRAM SOURCE Press the EVIDENT bunion on the Remold Control or LOME Control Panel to select the desired program source. Repeated pressing the button will switch between inputs as follows: Broadest TV (ltl AVS. Broadcast TV... AUDIT SYSTEM « The Audi Output always ford a low-level audio signal from the selected Input. + The Audi Outputs feed a Monophonic signal whenever the sellotape input source Tas a Monophonic audio signal (e.g.
BE vo CONNECTING TC CAR POWER Front Vehicle Battery: RED: DOWDY Power Extension Catle{15foot} “3 variably sett to connect the ELM-70 1 the volley power supply arias depending on product packaging. MANUFACTURER : TEASING ELECTRIC GOLLY. TYPES | AWM STYLE 1015 WARNING The DC Battery Cord is ONLY for usa with this model.
IMPORTANT NOTE NEGATIVE & POSITIVE DOOR CIRCUITS: The S-wire shames for the LAM-70's built-in dom fights i& color-coded lor use in vehicles that employ & negative dour circular. This includes most US and imported vehicles, Mast Ford Motor Company vehicles and some imported vehicles employ a positive door circulate, First verify which type of circuital is used in the installation vehicle and then follow the instructions in the | appropriate section below.
1. LS M-7C INSTALLATION SON SHOULD THE LCD DISPLAY BE MOUNTED IN ANY POSITION WHERE A PICTURE MIGHT BE VISIBLE TO THE DRIVER, EVEN IN THOSE CASES WHERE BUCHANAN INSTALLATION 18 HOT PROHIBITED BY LAW, DOING SO MIGHT INCREASE THE LIKELIHOOD OF A SERIOUS ACCIDENT. EXAMPLE(Using optional mounting bracket} Install the unit with 4 scows, « Use extreme care 10 insure halt looks do not damage the unit.
1. INITIAL PREPARATION + Irritant batteries into the Remote Control unit by following the procedure described in the "REMOTE CONTROL BATTERY INSTALLATION section in this manual. + Follow tha procedure described In the "MENU OPERATION and "AUTO PROGRAM" sections that fallow to automatically Sean and store active television channels into memory. 2. BASIC OPERATION PROCEDURE 1. Lowering the LOD Tureen releases he AUTO POWER SWITCH (sew item #12 on page 8] and Hans power on.
On-Screen Display « On-screen displays automatically disappear after about § seconds # no selection is made. The MENU button gives you access to a variety of TV and Monitor functions, 1. Press the MENU button on the Ra mate Control, The First ime i is pressed, the following display appears on the screen, \dd-gp-ib sere a #1 SCREEN hall ag Vil = 2 FM TRANSMIT CER 3 LANGUAGE ENGLISH LR SEL «SET Many of this television's features are accessed through cm-soreen mans.
(1) ANTENNA SELECTION This many tier allows vou to change the tuner reception mode from "TV" (for regular VHF channels) and ® CATV” for cable channels). Procedure 1. Press the MENU bunion to bring up the MAIN MENU, 2. Pros the CHANNEL w/a futons {ff necessary} fo Highlight SETUP.
{2) AUTO PROGRAM This function allows automatic memorization of all active TV channels in your viewing area. Once memorized, channels can be selected with the CHANNEL WA bunions on the Remote Control or on the LSM3td's Control Anal. Procedure « Crass the TV/Video button as necessary to switch 0 TV Mode, + Pros the CHANNEL WA buttons if necessary) lo highlight « Crass the VOLUME + button to bring up the SETUP menu.
(1) ASPECT/ZOOM SELECTION This menu item allows you to change the ASPECT/ZOOM mode form viewing area, Procedure + Press the bu ten as necessary 10 with io TV Mode, » Press the CHANNEL w/4 buttons [f necessary) to * Press the VOLUME + bunion to bring up the SCREEN men GENS HB gone En Co strop INSPECTION FULL FS SCREEN SCANTY.
{4} FM BROADCAST MODE & Fi FREQUENCY The LAM-70 has a built-in FA Stereo Broadcast Transmitter to allow you fo listen to the audio signal from the selected program seize (TV, AVY, AV2, oF AVS} through the hide's FM radio. Procedure « Crass the MENU button to bring up the MAIN MENU. « Press the CHANNEL w/a buttons if necessary) lo highlight FM TRANSMIT, » rags the VOLUME « button io bring up the FM TRANSMIT menu. mm MENU ES FE TRANSPLANT LJ SETUP FY MODE ODE EB SCREEN Fi FREQ. 88.
The PICTURE button slows you fo select each picture adjustment element. General re Adjustment Procedure: + Press the PICTURE bunion on the Remote Control or on the LAM-70 Central Panel to bring up the PICTURE Menu. A Peas the CHANNEL w/a bunions to move the cursor 10 the tier you wish to adjust. « Usa tha VOLUME + buttons to stadium the replete to sonar taste. An adjustment bar graph will appear at the bathroom of the screen as soon 2s the VOLUME + or VOLUME bunion Is pressed.
The STATUS bunion on the Remote Control lets you sissified between 2 CUSTOM adjustable picture setting mode or any ens of 3 factory preset picture modes. Pressing the PICTURE bunion repeatedly changes the mode as follows: {1) CUSTOM mode | & STANDARD dare l (3) DYNAMIC mode 1 (5 HO DISPLAY {47 MILD mate MODE PICTURE Select this mode lo vise a puce that may be adjuster 10 your swan personal fasts.
{1) QUICK VIEW Button Press the Q. VIEW button on the Remote Control. — The previously viewed channel will appear on the screen. TY Crass Q.VIEW again to switch back to the original channel ~~ (2) DISPLAY Button se Press the DISPLAY button on the Remote Control Ry The Program Source (Chanson 4 & MTS mode, AVI, AVE or AVE] you as viewing and the set: ting of the SLEEP TIMER will ba displayed as shown.
{4} MUTE Button Press the MUTE button on the Remote Control. Audio trim any speaker(s} detach to the EXTERNAL SPEAKERS OUTPUT CONNECTOR wil be reduced to zero ard "MUTE" will appear on the strewn Pressing the MITE button again wil rosters the audio fo fis original level.
The most common Types of television interference are as follows © (GRANITIC NOISE: Black spats or horizontal lines may appear, picture may flutter or drift. Usually caused by in acne from automobile ignition systems, neon lamps, electric drills and other elect appearances. GHOSTS; hosts are caused by tha television signals following twa paths, One is a diet and the other is reflected from all buildings, hills or other objects.
Before interesting service, please refer © tha following chart fur he symptom and posits solution. For mare fermentation, see the corresponding page In tis manual.