DIGITAL READY TV INSTRUCTION MANUAL MODEL: 29GG400 WWW.KEC.CO.
EXCELLENT PICTURE AND SOUND QUALITY, MULTIPLE FUNCTION TABLE OF CONTENTS READY TELEVISION FOR DIGITAL BROADCASTING FEATURES BEFORE USING THIS PRODUCT FEATURES PRECAUTIONS LOCATION OF CONTROLS USE OF THE REMOTE CONTROLLER ANTENNA CONNECTION POWER SUPPLY VIDEO / AUDIO CONNECTION EXCELLENT PICTURE QUALITY 3~5 6~8 9~10 11~12 13~14 15 16~18 640 480 Resolution ! Flickerless picture and NTSC image conversion to progressive scan! You can view an analog broadcasts with the best picture quality .
MISCELLANEOUS FUNCTIONS MISCELLANEOUS FUNCTIONS DOUBLE WINDOW Watch main and sub picture simultaneously! Closed Caption Decoder : A Built-In Closed Caption Decoder(CCD) detects broadcasts with encoded closed caption signals and displays their content on the screen. PERSONAL COMPUTER INPUT It can display a 640 Built-In V-Chip(Violence Chip) : This "Blocking V-Chip" Allows adults to block television programs, movies, and videos which they feel are inappropriate for children.
PRECAUTIONS PRECAUTIONS Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. Don’t use a volatile solvents like benzene in cleaning. Clean TV with a piece of dry cloth. Separate TV set from magnetic materials like speaker, telephone. Take due care not to use this TV close to other electric apparatus. Don’t pull the power cord out. Place TV set on a flat and stable spot.
PRECAUTIONS GRAPHICAL SYMBOLS EXPLANATION LOCATION OF CONTROLS FRONT PANEL VIEW(LIST OF KEY SWITCHES, CONNECTORS) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
LOCATION OF CONTROLS THE USE OF THE REMOTE CONTROLLER REAR PANEL VIEW Point to the remote controller sensor of the TV set. The maximum operatable distance is approximately 20 feet from the remote controller sensor, and not more than 30 to either side of the center. The operation of the remote controller is most effective when there's no obstruction between it and the remote controller sensor. The duration of the batteries is approximately 6 months to 1 year.
THE FUNCTIONS OF THE REMOTE CONTROLLER 1. P.C Mode Selection Button 2. Video Mode Selection Button VIDEO P.C POWER 1 2 DOUBLE SURROUND 4 5 3 MUTE Q.VIEW 6 7 CH 10 MENU VOL VOL 8 9 CH 12 11 SLEEP WIDE 13 S.STD 14 P.STD 1 2 3 4 5 6 7 8 9 0 100 15 16 DISPLAY ADD/DEL MTS PICTURE ABC 18 19 22 PIP TV/VIDEO POSITION SIZE 24 25 28 31 V-CHIP STILL SWAP CH INDEX STROBE 17 20 21 23 27 26 30 29 (VIDEO1 VIDEO2 VIDEO3 YUV RGB TV) 3. Power Button 4. Surround Button 5.
ANTENNA CONNECTION POWER SUPPLY CABLE TV(CATV) CONNECTION In case that the power cord is 110V AC, Insert the AC cord plug into a standard 110V polarized AC outlet. Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter / descrambler is generally provided to the subscriber by the cable TV company. This converter / descrambler is necessary for normal watching of the scrambled channels.
VIDEO /AUDIO CONNECTION VIDEO /AUDIO CONNECTION Please use the front terminals(VIDEO 3) for a GAME-PLAYER or CAMCODER. S-VHS Input has priority over VIDEO 3 input. Push the video button in sequence until VIDEO 3 appears on the picture. 2 Listen to the sound of main picture or sub picture with headphone or earphone.
VIDEO /AUDIO CONNECTION 4. S-VHS IN : At either video 2 or video 3 mode, insert S-VHS cable from set-top box or VCR into S-VHS terminal. And the display will change from video 2 to S-VHS 2 or video 3 to S-VHS 3. S-VHS input has priority over video 2 input. 5. DVD IN : Insert A/V cables from DVD player. Be Careful in connecting the jacks for Y,CB,CR. 6. L,R : In case of DVD, RGB or PC mode, input the audio signals into this L,R JACKS if necessary. 7. RGB IN : Insert A/V cables from DVD player or set-top box.
PICTURE ADJUSTMENT AUTOMATIC PICTURE ADJUSTMENT PICTURE ADJUSTMENT MANUAL PICTURE ADJUSTMENT By pressing the P.STD button on the remote controller, sequentially select any one of 4 picture standard pre-sets. Adjust the picture state one by one, using VOL + and CH / button. Pressing PICTURE button on the remote controller, the same display will appear. Press menu button and then select PICTURE icon by VOL -/+KEY. 1.
SOUND ADJUSTMENT AUTOMATIC SOUND ADJUSTMENT SOUND ADJUSTMENT MANUAL SOUND ADJUSTMENT By pressing the S.STD button on the remote controller, sequentially select any one of 4 SOUND standard pre-sets. Adjust the sound state one by one, using VOL + and CH / button. Press menu button and then select SOUND icon by VOL -/+ Key. 1. Press CH button LOUDNESS : Loudness effects for a grand bass sound. AVC(AUTOMATIC VOLUME CORRECTION) : different sound sources fairly do not have the same volume level.
SOUND ADJUSTMENT HEADPHONE SOUND ADJUSTMENT STEREO SOUND SYSTEM Adjust the volume of sound by VOL + and CH / button. When the power is switched on or channel changes, “ [[S]], cally displayed, depending on the current broadcast signal. ]” symbols are automati- If the receiving signal is weak, noise may be heard. In such case, press MTS button and set the sound mode mono for better sound reception.
CLOCK SETTING CLOCK SETTING The On/Off timer lets you use alarm and automatic off-functions . Set the time and minutes and use as a clock and timer! Set ON TIMER’S time and minutes, using VOL+ and CH / button. Set the current time before you set the automatic On/Off timer. The current time will be displayed by pressing Display button on the remote controller. Press menu button and then select CLOCK icon by VOL -/+ Key. 1. Press CH button. Set OFF TIMER’S time and minutes, using VOL+ and CH / button.
CLOCK SETTING When the power is off(stand-by mode) after timer is set, the color of stand-by indicator changes from green to orange. SET UP ANTENNA SELECTION CATV If on timer and off timer is set at the same time and minutes, ON TIMER has priority over off timer when power is off You can activate timer function and channel, using VOL + and CH / button. TV In this mode, you can change the broadcast mode between TV (For regular VHF/UHF channel) and CATV (For cable channel).