User's Manual

ManualsBrandsKTV Global ManualsElectronics29 Inches Flat Type TV Broadcast Receiver

ANTENNA SELECTION

CATV

In this mode, you can change the broadcast mode between TV (For regular VHF/UHF

channel) and CATV (For cable channel).

Press menu button and select set-up icon by VOL -/+ Key.

1. Press CH

button.

2. Change the broadcast mode by VOL +

button.

SET UPCLOCK SETTING

When the power is off(stand-by mode)

after timer is set, the color of stand-by

indicator changes from green to orange.

If on timer and off timer is set at the same

time and minutes, ON TIMER has priority

over off timer when power is off

You can activate timer function and chan-

nel, using VOL + and CH

/ button.

SLEEP TIMER

Select a sleep time period from 15 to 90 minutes.

The television automatically is turned off after the set sleep time has elapsed.

Whenever sleep button is pressed, the time period change as shown below

OFF

15 30 45 60 90.

AUTOMATIC POWER -OFF OPERATION

Set is turned off automatically after 15 minutes in the absence of picture signal.

Summary of content (7 pages)

PAGE 1
CLOCK SETTING When the power is off(stand-by mode) after timer is set, the color of stand-by indicator changes from green to orange. SET UP ANTENNA SELECTION CATV If on timer and off timer is set at the same time and minutes, ON TIMER has priority over off timer when power is off You can activate timer function and channel, using VOL + and CH / button. TV In this mode, you can change the broadcast mode between TV (For regular VHF/UHF channel) and CATV (For cable channel).
PAGE 2
SET UP AUTO-PROGRAM SET UP MANUAL SEARCH All broadcast channel in the current mode (CATV/TV) will be scanned and stored. The channel is deleted from the memory, and the color of the channel number changes from green to red. After this operation, press MENU button to exit. FINE-TUNE T0 stop this procedure during the operation, press VOL + button. If the reception is clear, do not fine-tune the channel. Because this is done automatically during the autoprogram operation.
PAGE 3
PIP OPERATION PIP OPERATION In this mode, enjoy watching and listening to two picture sources at the same time. PIP OPERATION PIP OPERATION 3. PIP Size 1. PIP ON / OFF Press VOL + button to activate PIP operation or press the PIP button on the remote controller. 4. PIP TV/VIDEO Press TV/VIDEO button on the PIP panel and then PIP picture mode will be toggled as shown below. TV 2. PIP Position and VOL + button to change a direction or press position button on the Press CH panel PIP.
PAGE 4
PIP OPERATION PIP OPERATION PIP OPERATION PIP OPERATION 7. Channel index function You can check other broadcast pictures in sequence while watching main picture! 8. PIP Strobe operation You can view sports game action frame by frame in still quickshots. Press strobe button once more to exit. Press index button in sequence. Press index button once Press index button twice Press index button thrice times Press index button four times Press index button again or CH 34 / button to exit.
PAGE 5
FUNCTIONS FUNCTIONS WIDE FUNCTION HALFTONE MODE This function lets you select one between wide and normal screen. WIDE ON : 16:9 SCREEN WIDE OFF: 4:3 SCREEN Press menu button and then select FUNCTION icon by VOL -/+ key. 1. Press CH See guide characters on a slight black background. Press VOL + button to activate the halftone mode. button BLUEBACK MODE 2. Press VOL + button to activate wide mode or press wide button on the remote controller.
PAGE 6
FUNCTIONS CLOSED CAPTION DECODER MODE A built-in closed caption decoder(CCD) Detects broadcasts with encoded closed caption signals and displays their content on the screen. While the closed caption and text modes are respectively capable of receiving either of 2 channels of information (CCD 1&2, text 1&2), few TV stations broadcast more than 1 channel of CCD information, and fewer still broadcast any text information at all.
PAGE 7
PRACTICAL APPLICATION PRACTICAL APPLICATION DOUBLE WINDOW FUNCTION DOUBLE WINDOW FUNCTION 3. Swap function in double window. Press swap button on the panel PIP to swap main picture with sub picture. VIDEO 1 RGB VIDEO1 TV VIDEO 2 (S-VHS 2) VIDEO 1 VIDEO 2 (S-VHS 2) VIDEO 2 (S-VHS 2) VIDEO 2 (S-VHS 2) VIDEO 3 (S-VHS 3) VIDEO 2 (S-VHS 2) YUV VIDEO 2 (S-VHS 2) RGB VIDEO 2 (S-VHS 2) TV 4.