User's Manual

Please read this manual to ensure your safety and proper use of the product.
All rights reserved. No part of this manual may be reproduced or used in any manner without
the written permission of KT&C.
The contents of this manual may be changed without prior notice to improve the function and
quality of the product.
Safety Precautions
* We recommend the door lock be installed by an experienced professional to avoid malfunction.
The following lists general safety precautions to ensure the safety of the
user and prevent any damages to the product.
Do not disassemble or attempt to
repair the parts.
Ensure correct polarity (+/-).
Change user passwords periodically
for your security.
When the battery is low or dies,
replace ALL batteries at the same time.
Do not spill liquid on the product or
use the product with wet hands.
Upon low battery alert,
replace the battery within one week.
Do not expose the indoor body to
direct sunlight for a long time.
It may result in temperature sensor
alarm to go off.
When cleaning the product,
do not directly spray flammable substances
such as alcohol or benzene.
Wipe using a clean cloth.
Auxiliary Deadbolt Lock Type
(Password/Emergency Ke y )
DIGITAL DOOR LOCK
User Manual
OR
●
Turn the manual knob.
For emergency use.
●
Click the [Open/Close] button.
◇ If the door is opened from the inside while the external forced lock function is set,
an intrusion alarm may go off.
Smart
Touchpad
Remote App
(optional)
4
How to Use
1. In open state, click [Registration] button.
The password for the selected Register ID will be lit on the number pad.
2. Enter the Register ID (1 to 20) and [#] key.
5. When done, click [Registration] button to complete the deletion.
4. If you want to delete more passwords, repeat steps 2-5.
◇ If there is no password stored under the selected Register ID,
an error tone will sound.
◇ When all saved passwords are deleted, the session will automatically end.
◇ When all saved passwords are deleted,
only the factory default password (1234) will remain operational.
3. Press [#] key to confirm.
If the master password is already registered, enter master password + [ ] key.
2
1
7
3
5 64
Delete Individual Password
5
How to Use
1. In open state, click [Registration] button.
3. Hold down [Registration] button for 3 seconds.
1 3
2
◇ When all passwords are deleted,
only the factory default password (1234) will remain operational.
2. Press [#] key.
If the master password is already registered, enter master password + [ ] key.
Delete All Passwords
OR
◇ Automatic re-lock: If the door is not opened within 5 seconds after unlocking,
it will automatically get locked again.
◇ The door would not open with the master password.
◇ Imaginary function (prevent password exposure) - Up to 20 digits including password.
- You can conceal your password exposure by entering an imaginary number before
or after the password.
◇ Safe mode: When 5 consecutive authentication error occurs,
an alarm will go off and number pad operation stops for 3 minutes.
It can be reset by unlocking from inside using manual knob or [Open/Close] button.
●
Use Emergency key.
●
Touch the number pad and enter the registered password + [ ] key.
[Optional] You can open the door using the smartphone app.
[Example] '123456' password → '2345123456' or '1234562345'
Unlock from Outside
6
How to Use
Unlock from Inside
◇ When you touch the number pad from the outside, an alarm sounds.
◇ Under this mode, the smartphone app will not work. Only emergency key works.
This function prevents another user to gain access with a registered
password while the user is inside.
Hold down [Open/Close] button for 3 seconds in close state.
If you press [Open/Close] button from the inside or open the door
using the manual knob, it will be released.
Set
Internal force Lock
Release
This is a security enhancement function that triggers an alarm when an
intruder operates the door lock from inside when home is vacant for an
extended time.
Unlocking the lock using a password or the app.
Touch the number pad + Password + Hold down
[#] key for 3 seconds.
◇ An alarm will trigger when [Open/Close] button or use the manual knob.
◇ An alarm will trigger when [Registration] button is clicked.
◇ The function is sustained even when the battery replacement.
External Force Lock
Set
Release
A high-pitched alarm will sound when the inside temperature reaches
above 75℃ (167°F) while the door is closed.
High-Temperature Alarm
This function is to notify the open state of the door in Auto-Lock mode.
Open Door Alert
If the door is opened and does not get closed within a certain period,
the notification alarm will sound after 10 and 15 seconds.
4. Click [Registration] button to complete the setup.
4. Click [Registration] button to complete the setup.
◇ Auto-lock is set by default.
◇ Only manual lock mode will be available when the door close sensor is
not installed.
Auto/Manual Lock
[Auto lock setting]
1. In open state, hold down [Registration] button for 3 seconds.
If the master password is registered, enter the master password + [ ] key.
1. In open state, hold down [Registration] button for 3 seconds.
If the master password is registered, enter the master password + [ ] key.
2. Press [3] .
3. Press
[1] .
2. Press
[3] .
3. Press
[2] .
[Manual lock setting]
◇ Lock from outside: Touch the number pad for more than 1 second to lock.
◇ Lock from inside: Press [Open/Close] button or turn the manual knob to lock.
2
How to Use
Password Registration
◇ Up to 20 passwords can be registered and registration automatically stops when all
20 Register IDs are being used.
◇ When registration is not completed properly,
the previous password will be maintained.
◇ When registering for the first time, the first registered password will replace
its factory default password of ‘1234’.
◇ The same password cannot be registered under multiple Register ID.
◇ The registered master password cannot be registered as a password.
2
1
7
3
5 64
1. In open state, click [Registration] button located behind the battery cover.
7. If you want to register more passwords, repeat steps 2-5.
8. When the password registration is done,
click [Registration] button to complete.
2. Enter a new password.
4. The entered password will be lit up sequentially on the number pad.
6. Upon registering a new password,
a registered storage number (Register ID) will light up on the number pad.
Password has to be 4
–
10 digits.
3. Press [ ] key.
If the master password is already registered, enter‘Master Password + [ ]’key.
5. If the entered password is correct,
press [ ] key to register or
[#] key to retry.
3
How to Use
This function is to temporarily disable the number pad tone so as not
to disturb those inside the house.
◇ If there is no operation for 7 seconds after pressing [#] key,
the etiquette mode ends.
Etiquette Mode
Touch the number pad and press [#] key before entering the password.
This is a one-time function.
The number pad tone will sound on the next use.
Set
Release
◇ Even in etiquette mode, an alarm will go off in any alarm situations.
4. Click [Registration] button to complete.
3. Press [
3
] or [
4
] or [
5
] or [
6
] to set.
[3] : 15 seconds, [4] : 30 seconds, [5] : 1 minute, [6] : 2 minutes
◇ Locking will be performed regardless of the door close sensor status.
◇ When the door is manually locked within the set delay, the time delay will
be overridden. Auto/manual lock setting would override and disable this
time delay setting.
◇ It will automatically lock after the set delay time (15 seconds, 30 seconds,
1 minute, 2 minutes) from the point when the deadbolt is unlocked.
1. In open state, hold down [Registration] button for 3 seconds.
2. Press
[3] .
Delayed Lock
Volume Up
◇ Alarm volume will be steady regardless of volume level setting.
◇ At factory reset, the volume is set to level 6.
◇ The volume can be adjusted in seven levels while the lowest level is silent.
◇ When the volume reaches the highest or lowest level,
the LED would stop flashing upon up or down key.
Volume Control
[ Registration ] Button ( 3 seconds ) + [1] + [3] ( up a step )
+ [
Registration ] Button
Volume D o wn
[
Registration ] Button ( 3 seconds ) + [1] + [1] ( down a step )
+ [ Registration ] Button