•Dual-RX •Dual-Band •Dual-Watch •Dual-Display •MICRO USB Charging •DTMF Selective Calling •Channel Scan/Memory Scan •Wide viewing angle LCD Screen USER'S MANUAL
Preface Thank you for buying the company's products。 This product offers latest design, enhanced features, solid performances and easy accessibility. We believe you will be pleased with the high quality and reliable features for all your communication needs. This manual includes functional descriptions and step-by-step instructions. It also includes troubleshooting guides. If the body is damaged due to incorrect operation, please read the safety information manual carefully before use.
Highlight Function -Fast scan frequency and radios pairing -DTMF encoding/Decoding -Up to 128 named memory channels.
Table of Contents Chapter 1. Getting started……………………………………… 1. Packing List………………………………………………………… 2. Assembly…………………………………………………………… 2.1 Antenna……………………………………………………………… 2.2 Belt clip……………………………………………………………… 2.3 Battery……………………………………………………………… 2.4 Charging and battery maintenance……………………… 3. Getting to know your radio………………………………… 3.1 Radio Controls and Indicators…………………………… 3.2 Reading the display……………………………………………… 3.3 Status LED………………………………………………………… 3.4 The main keys…………………………………………………… Chapter 2.
Chapter 3. Advanced Operations…………………………… 3.1 Working the menu system………………………………… 3.2 Scanning…………………………………………………………… 3.3 Fast scan frequency and pairing………………………… 3.4 Dual watch………………………………………………………… 3.5 CTCSS, DCS and Tone-burst………………………………… 3.6 DTMF……………………………………………………………… 3.7 DTMF call………………………………………………………… 3.8 FM Radio…………………………………………………………… 3.9 VOX…………………………………………………………………… 3.10 Special DCS……………………………………………………… 3.11 Manual programming……………………………………… Chapter 4.
Chapter 1. Getting started 1. Packing List Please unpack carefully and check that you have received the following items. If any item is missing or damaged, please contact your dealer. Item Quantity(PCS) Item Quantity(PCS) Radio 1 Antenna 1 Belt Clip 1 Wrist Strap 1 Charging Cradle 1 Documentation Kit 1 1 Lithium Ion Poly Battery 1 AC-DC Charging Adapter The frequency band is marked on the label of antenna; if it is unavailable there; see the label on the radio. 2.
2.1 Antenna This transceiver is fitted with a Male SMA connector. To mount your antenna (Female SMA Connector), align the two connectors and turn clockwise until it stops. NOTE • Do not over-tighten your antenna to avoid damage to the connectors. • When installing the antenna, don't grip it by the top. Grip by the base and turn. • Do not hold the antenna with your hand or wrap the outside of it to avoid bad operation of the transceiver. • Never transmit without an antenna. 2.
them through the holes on the belt clip as you screw them back into the radio body. NOTE Do not use any form of glue to fix the screws on the battery clip. The solvents in the glue may cause damage to the battery casing. 2.3 Battery Before attaching or removing the battery make sure your radio is turned off by turning the power/volume knob all the way counter-clockwise.
■Installation Make sure the battery is aligned in parallel with the radio body with the lower edge of the battery about 1-2cm below the edge of the radio. NOTE Once aligned with the guide-rails, slide the battery upward until you hear a click as the battery locks in place.
■Removal To remove the battery, press the battery release above the battery pack, as you slide the battery downward. 2.4 Installing the Additional Speaker/Microphone (Optional) Pry open the rubber MIC-Headset jack cover and then insert the Speaker / Microphone plug into the double jack.
2.5 Charging and battery maintenance ■Charging NOTE Battery should be fully charged before initial use. Optimum battery efficiency will be achieved after the three full battery charge and discharge cycles.
Follow these steps to hook up and use the charger: 1. Plug the DC connector of the power adaptor into the charger base. 2. Plug the AC connector of the power adaptor into a main AC wall outlet. 3. Place the radio in the charging slot on the charger. 4. Make sure the radio is making contact with the charger. When the red LED comes on steady, your radio is charging. 5. The radio is fully charged once the charger's green status LED goes steady.
To determine the charging status, check the light-emitting diode (LED) indicator on the charger according to the following table: Charging Indicator Charging Status Glows red The battery is charging. Glows green The battery is fully charged. Flashes red rapidly The battery fails to be charged. NOTE The charger and battery are fitted with matching notches so that you can charge your battery on its own! Practical if you have two batteries.
• Never attempt to disassemble your battery pack. • Do not short-circuit the battery. • Use only batteries approved by the original manufacturer. • Do not charge the rechargeable battery used in this equipment in any charger other than the one specified in the owner’s manual. Using another charger may damage the battery or cause the battery to explode. • The battery for your radio comes uncharged from the factory; Please let it charge for at least four to five hours before you start using your radio.
■Storage Partially charge your battery before long-term storage in order to prevent damage from over- discharge. While lead acid must always be kept at full charge during storage, this radio uses a lithium-based battery and should be stored at around a 40 percent charge. This level minimizes age-related capacity loss while keeping the battery in operating condition and allowing self-discharge.
3. Getting to know your radio 3.1 Radio Controls and Indicators Figure 1.3.1.
Table 1.3.1 Radio controls and indicators 1. Status LED 2. PTT key 3. Microphone 4. Side key2 (PF2) 5. Side key3 (PF3) 6. VFO/MR mode key 7. A / B select key 8. MENU function key 9.UP/DOWN Navigation key 10. Numeric keypad 11. Battery release latch 12. Antenna 13. Flashlight 14. Power / Volume knob 15. Dual band LCD 16. Accessory jack 17. Speaker 18. MICRO USB charge jack 19. EXIT key 20. Battery pack 21. Battery contacts 3.
Table 1.3.2. Display icons and what they mean Icon Description Icon Description Squelch Open/ Close Indicator Battery level indicator D Dual watch enabled VOX enabled N Narrowband enabled The keys are locked. + TX will be shifted higher in frequency than RX Indicates active band or channel - TX will be shifted lower in frequency than RX DCS DCS enabled CT CTCSS enabled 10/2 Current channel number R Reverse function enabled 467.
LED Indicator Radio Status Glows red Transmitting. Glows green Receiving. 3.4 The maim keys ■Side key 2 –SK2 (Flashlight and alarm) Press [SK2] momentarily to turn on the LED flashlight. Another momentary press will flash the LED. Another momentary press turns the flashlight off. Press and hold [SK2] to activate the alarm function. Press (a short press) again to turn it off. ■Side key 3–SK3 (Broadcast FM and Monitor) Press [SK3] momentarily to start the broadcast FM receiver.
signal. ■V/M(VFO / MR) mode key Press [V/M] switches between Frequency (VFO) Mode and Memory (MR) mode. Memory mode is sometimes also referred to as Channel mode. To save frequencies to channel memory you must be in Frequency (VFO) mode. ■A/B select key The [A/B] key switches between A (upper) and B (lower) displays. The frequency or channel on the selected display becomes the active listening and transmit frequency or channel. To save frequencies to channel memory you must be on the A display.
The numeric keys have their secondary function printed on them (in reality it's rather menu short-cuts, more on that in Chapter 3.1, working the menu system). The [* ] and [# ] keys on the other hand have actual secondary functions, scan and keypad lock respectively. Press and hold the [0] key to display the battery voltage. NOTE The charger and battery are fitted with matching notches so that you can charge your battery on its own! Practical if you have two batteries.
stop as soon as an active station is found, regardless of scanner resume method. The radio features a keypad lock that locks out all keys except for the three side keys. To enable or disable the keypad lock, press and hold the [# ] key for about two seconds. You can also enable so that the radio automatically locks the keypad after ten seconds from the menu, see Chapter 3.1, working the menu system (menu 23). ■Star[* ]/scan Key To enable the scanner, press and hold the [* ] key for about two seconds.
Chapter 2. Basic Operations 2.1 Power and volume Before we turn the power on, make sure you have attached the battery and antenna. ■Turning the unit on To turn the unit on, simply rotate the volume/power knob clockwise until you hear a "click". If your radio powers on correctly there should be an audible double beep after about one second and the display will show a message or flash the LCD depending on settings for about one second. Then it will display a frequency or channel.
■Turning the unit off Turn the volume/power knob counter-clock wise all the way until you hear a "click". The unit is now off. ■Adjusting the volume To turn up the volume, turn the volume/power knob clock-wise. To turn the volume down, turn the volume/power knob counter-clock-wise. Be careful not to turn it too far, as you may inadvertently turn your radio off. 2.2 Making a call NOTE Press the【A/B】key to switch the main channel to the other channel if there is 2 channels shown on the display.
entering, press the [PTT] key, a call to the current channel. Speak into the microphone with normal tone. Initiate a call, the red LED is on. • Receive a call: When you release the [PTT] key, you can answer it without any action. When receiving a call, the green LED is on. NOTE To ensure the best reception volume, keep the distance between the microphone and the mouth at the time of transmission from 2.5 cm to 5 cm. 2.
2.4 Frequency (VFO) mode In Frequency (VFO) mode you can navigate up and down the band by using the [UP] and [DOWN] keys. Each press will increment or decrement your frequency according to the frequency step you've set your transceiver to. You can also input frequencies directly on your numeric keypad with kilohertz accuracy. The following example assumes the use of a 12.5 kHz frequency step. Example 2.4.1. Entering the frequency 462.6125 MHz on display A 1.
WARNING Just because you can program in a channel does not mean you're automatically authorized to use that frequency. Transmitting on frequencies you're not authorized to operate on is illegal, and in most jurisdictions a serious offence. If you get caught transmitting without a license you can and will get fined, and in worst case sent to jail. However, it is legal in most jurisdictions to listen.
Chapter 3. Advanced Operations Chapter 3 covers the more advanced operations, such as setup of repeater offset and programming via computer link. 3.1 Working the menu system 3.2 Scanning 3.3 Fast scan frequency and pairing 3.4 Dual watch 3.5 CTCSS, DCS and Tone-burst 3.6 DTMF 3.7 DTMF call 3.8 FM Radio 3.9 VOX 3.10 Special DCS 3.
3.1 Working the menu system For a complete reference on available menu items and parameters, see Appendix C, Menu definitions. ■Basic use Procedure 3.1.1 Using the menu with arrow keys 1. Press the [MENU] key to enter the menu. 2. Use the [UP] and [DOWN] keys to navigate between menu items. 3. Once you find the desired menu item, press [MENU] again to select that menu item. 4. Use the [UP] and [DOWN] keys to select the desired parameter. 5.
■Using short-cuts As you may have noticed if you looked at Appendix C, Menu definitions, every menu item has a numerical value associated with it. These numbers can be used for direct access of any given menu item. The parameters also have a number associated with them; see Appendix C, Menu definitions for details. Procedure 3.1.2 Using the menu with short-cuts 1. Press the [MENU] key to enter the menu. 2. Use the numerical keypad to enter the number of the menu item. 3.
3.2 Scanning The radio features a built in scanner for the VHF and UHF bands. When in Frequency (VFO) mode it will scan in steps according to your set frequency step. In Channel (MR) mode it will scan your channels. Dual Watch is inhibited while scanning NOTE To enable the scanner, press and hold the [* ] key for about two seconds. Press [# ] key to exit scanning mode.
5. Press the [MENU] key to confirm and save. 6. Press the [EXIT] key to exit the menu. -Time operation In Time Operation (TO) mode, the scanner stops when it detects a signal, and after a factory preset time out, it resumes scanning. -Carrier operation In Carrier Operation (CO) mode, the scanner stops when it detects a signal, and after a factory preset time with no signal it resumes scanning. -Search operation In Search Operation (SE) mode, the scanner stops when it detects a signal.
■Tone Scanning Scanning for DCS and CTCSS Codes/ Tones Scanning for a DCS code or CTCSS tone can be done while Frequency Mode (VFO) or Channel Mode (MR) is selected. Only when VFO mode is selected, can the detected code / tone be saved to menu 11/12. NOTE DCS code and CTCSS tone scanning mode can be accessed with or without a signal being present. The scanning process itself only occurs while a signal is being received. Not all repeaters requiring a DCS code or CTCSS tone for access will transmit one back.
Scanning for CTCSS Tone 1. Press [MENU] key to enter the menu. 2. Enter [1][2] on your numeric keypad to come to Menu 12: RX CTCS. 3. Press the [MENU] key to select. Insure you have a tone activated (and it is not off). 4. Press the [* ] to begin CTCSS scanning. ■Procedure 3.2.2 CPS programming Channel scanning 1. Channels are added to the scan group via CPS programming software. In the channel list, the Scan Add option is set to ON, the channel is added to the scan group.
Figure 3.2.
allows to add, OFF prohibits to add. 3.3 Fast scan frequency and pairing This unit can be regarded as a receiver to quickly implement frequency monitoring, pairing, and callback functions. 1. In standby mode, press [MENU] [* ] to enter the scan receiving status, and the received frequency and sub tone code will be displayed on the screen. 2. Press [UP]/[DOWN] to switch the UHF/VHF band in the scan. 3.
You can both have one receiver in your radio and flip-flop between two frequencies at a fixed interval (known as Dual Watch), or you can equip a radio with two receivers (known as Dual Receive or Dual VFO). Procedure 3.4. Enabling or disabling Dual Watch mode 1. Press [MENU] key to enter the menu. 2. Enter [7] on the numeric keypad to get to Dual Watch. 3. Press [MENU] to select. 4. Use the [UP] and [DOWN] keys to enable or disable. 5. Press the [MENU] key to confirm. 6.
same way and any radio will make contact with every other radio in the group. Individual calling, sometimes also known as paging, is a one-to-one form of communication. Every radio is programmed with a unique ID code. And only by sending out a matching code can you get that radio to open up to your transmissions. The radio features three different ways of group calling: • DCS • CTCSS • Tone-burst (1750Hz) The radio does not feature any form of individual calling.
■DCS DCS is set with menu 11 RX DCS and menu 13 TX DCS. For a complete list of available DCS codes, see Appendix E, “DCS Codes”. Procedure 3.5.1 DCS setup how-to 1. Press the [MENU] key to enter the menu. 2. Enter [1][1] on the numeric keypad to get to receiver DCS. 3. Press [MENU] to select. 4. Enter desired DCS code on the numeric keypad. 5. Press [MENU] to confirm and save. 6. Enter [UP] on the numeric keypad to go to transmitter DCS. 7. Press [MENU] to select. 8.
For more information see the section called “11 RX DCS - Receiver DCS” and the section called “13 TX DCS Transmitter DCS” in Appendix C, Menu definitions. ■CTCSS CTCSS is set with menu 12 RX CTCS and menu 14 TX CTCS. For a complete list of available CTCSS codes and corresponding sub-tone frequencies, see Appendix D, CTCSS Table. Procedure 3.5.2 CTCSS setup how-to 1. Press the [MENU] key to enter the menu. 2. Enter [1][2] on the numeric keypad to get to receiver CTCSS (RX CTC). 3. Press [MENU] to select.
8. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad. Make sure it's the same frequency as that you entered for receiver CTCSS. 9. Press [MENU] to confirm and save. 10. Press [EXIT] to exit the menu system. For more information see the section called “12 RX CTCS - Receiver CTCSS” and the section called “14 TX CTCS - Transmitter CTCSS” in Appendix C, Menu definitions.
3.6 DTMF DTMF is an in-band signaling method using dual sinusoidal signals for any given code. Originally developed for telephony systems, it has proved a very versatile tool in many other areas. In two-way radio systems, DTMF is most commonly used for automation systems and remote control. A common example would be in amateur radio repeaters where some repeaters are activated by sending out a DTMF sequence (usually a simple single-digit sequence).
3.7 DTMF calls CPS programmed The CPS programming settings of the DTMF call function include programming of important parameters such as DTMF code group, local ID code, and group call code. Before using the DTMF selective call function, make the following settings through the CPS programming software: Procedure 3.7.1 CPS programming setup how-to 1.
Figure 3.7.
2. Set the signaling code, PTT-ID mode Method 1: PC settings In the CPS software - "Edit" - "Channel Information", it can signal the channel selection, PTT-ID mode selection, and write it to the radio.
Method 2: Radio menu settings 1. Press the [MENU] key to enter the menu. 2. Enter [1][7] on the numeric keypad to get to S-CODE. 3. Press [MENU] to select. 4. Use the [UP] and [DOWN] keys to select 1-15. 5. Press [MENU] to confirm and save. 6. Press [EXIT] to exit the menu system. 3.8 FM Radio The FM radio function of the radios defaults to long press the [SK3]key. Procedure 3.8.
Please press [SK3] to exit out from the FM radio mode. NOTE When working on the FM frequencies, the current frequency and channel will be standby and it will be temporarily switched to two-way communication once getting the receiving signals, and then automatically get back to FM radio after the signal disappears. Press [PTT] to transmit, and still gets back to FM radio after 5 seconds. 3.
-The larger the value, the higher the sensitivity. 5. Press [MENU] to confirm and save. 6. Press [EXIT] to exit the menu. - Repeat the above operation and select OFF to turn off the voice-activated transmission function. 3.10 Special DCS The special DCS is a dynamic DCS. Due to its dynamic nature, it is often impossible to crack DCS. He needs to set the DCS code and activate the special DCS function. This function is valid.
3. Press [MENU] to select. 4. Press the [UP] or [DOWN] key to select ON. - OFF: Turn off the special DCS function. 5. Press [MENU] to confirm and save. 6. Press [EXIT] to exit the menu. 3.11 Manual programming Memory channels are an easy way to store commonly used frequencies so that they can easily be retrieved at a later date.
programming if permitted. Channel Mode (MR) - Used for selecting preprogrammed channels. All programming must be initially none in the frequency mode (VFO) only. From there you have the option of assigning the entered data to a specific channel for access in the channel mode. Call tones, TX/RX tones, squelch, and power settings are adjustable on saved channels in channel mode. Ex. Programming a Simplex Channel with CTCSS tone EXAMPLE New memory in Channel 11: RX/TX = 462.625 MHz TX CTCSS tone 67.
press [MENU] to confirm. 5. Press [MENU][1][4][MENU] to come to Menu 14: TX CTCSS, press [UP]/[DOWN] to select 67.0,and then press [MENU] to confirm. 6. Press [MENU][2][6][MENU] to come to Menu 26: Memory, and then Press [1][0][MENU] to confirm (Ex. CH-11). 7. Press [V/M] return to MR Mode. Channel number will re-appear. Ex: Programming a Channel Repeater Offset with CTCSS Tone EXAMPLE New memory in Channel 20: RX = 462.625 MHz TX = 452.625 MHz(This is a (+ 10.00) Offset) TX CTCSS tone 67.
3. Press [EXIT] to exit the menu. Enter RX frequency [4][6][2][6][2][5] on you numeric keypad. 4. Press [MENU] [1][2] [MENU] to come to Menu 12: RX CTCS, press [UP]/[DOWN] to select 67.0, and then press [MENU] to confirm. 5. Press [MENU] [1][4] [MENU] to come to Menu 14: TX CTCSS, press [UP]/[DOWN] to select 67.0, and then press [MENU] to confirm. 6. Press [MENU] [2][5] [MENU] to come to Menu 25: Offset, enter offset frequency [1][0][0][0][0] on you numeric keypad. 7.
momentarily and you'll reverse your transmit and receive frequencies. Commercial Radio Setup PLMR users in the United States are mandated to move to 12.5 kHz narrowband communication in the 150-174 MHz VHF and 421-512MHz UHF bands by January 1, 2013. Follow these instructions to set your radio to Narrowband mode: This section is only true for VFO mode. WN is settable on a per channel basis and has to be set prior to storing a channel.
In contrast with Commercial radio operators, who often need very specific requirements to be compatible with a very specific radio implementation, Amateur radio operators tend to need the broadest possible settings in order to be compatible with as many systems as possible. This basically implies turning all the fancy features that you typically might need for a commercial setup off. In a typical Amateur radio setup the following settings would be recommended: • Set bandwidth to Wide (menu item 5).
Chapter 4. Product Safety Guide Important Safety Information Before using your radio, please read these general precautions and warnings. Warning and Notice Statements To make the most of this radio, it must be used properly. Please read the installation and operating instructions carefully before using the radio. Special attention must be paid to the WARNING and NOTICE statements in this manual. WARNING Statements identify conditions that could result in personal injury or loss of life.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two (2) conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The following WARNINGS and NOTICE information will make you aware of RF exposure hazards and how to assure you operate the radio within the FCC RF exposure limits established for the radio. WARNINGS To control your exposure and ensure compliance with the occupational/ controlled environmental exposure limits, always adhere to the following procedures. Guidelines: -DO NOT remove the RF Exposure Label from the device. -User awareness instructions should accompany device when transferred to other users.
antenna when transmitting. KEEP the radio at least two (2) inches (5 cm) away from yourself and others when transmitting. - When worn on the body, always place the radio in an approved holder, holster, case, or body harness or by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which exceed the FCC's occupational/ controlled environmental RF exposure limits.
EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the following directives: - 2014/53/EU - 2012/19/EU - 2011/65/EU - 2006/66/EU Please note that the above information is applicable to EU countries only.
Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and United Kingdom (UK). For the warning information of the frequency restriction, please refer to the package or manual section. •Disposal of your Electronic and Electric Equipment Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
IC Requirements: Licence-exempt radio apparatus This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Appendix A. - Troubleshooting Phenomena You cannot turn on the radio. During receiving, the voice is weak or intermittent. You cannot communicate with other group members. You hear unknown voices or noise. You are unable to hear anyone Analysis Solution The battery may be installed improperly. Remove and reattach the battery. The battery power may run out. Recharge or replace the battery.
because of too much noise and hiss. You may be in an unfavorable position. For Move to an open and flat area, restart the example, your communication may be blocked by radio, and try again. high buildings or blocked in an underground area. The radio keeps transmitting. You cannot use the keys. It may be the result of external disturbance (such as Stay away from equipment that may cause electromagnetic interference). interference.
Appendix B. - Technical Specifications General Frequency Range (VHF)136-174MHz/(UHF)400-470MHz (Rx ) (VHF)144-148MHz/(UHF)420-450MHz (Tx ) Memory Channel 128 Groups Operation Voltage DC 7.4 V ±10% Battery Capacity 2200mAH (Li-Ion) Frequency Stability ±2.5ppm Operating Temperature -20℃ to +60℃ Mode of Operation Simplex Antenna Impedance 50ohm Transmitter Part RF Output Power (VHF)5W (UHF)4W/3W/1W FM Modulation 11K0F3E@12.
Spurious Emission -36dBm＜1GHz， -30dBm＞1GHz Adjacent Channel Power 60dB @ 12.5KHz Transmission current ≤1600mA Receiver Part Receive Sensitivity 0.25μV (12dB SINAD) Adjacent Channel Selectivity ≥55dB@12.5KHz Inter Modulation and Rejection ≥55dB@12.5KHz Conducted Spurious Emission ≤-57dB@12.5KHz Rated Audio Power Output 1W @16 ohms Receive current ≤380mA Rated Audio Distortion ≤5% All specifications may be modified without prior notice or liability. Thank you.
Appendix C. - Menu definitions Menu Name № (Full name) 0 1 2 Squelch -Squelch level Setting Description Setting the squelch to 0 will open up the squelch entirely. [0 - 9] - Squelch silences the receiver when there is no signal. - Setting the squelch to 0 will open up the squelch entirely. Step - Frequency 2.5K[0] | 5K[1] | 6.25K[2] | 10.00K [3]| Selects the amount of frequency change in VFO/Frequency Step 12.50K[4]| 20.0K[5] | 25.0K[6] | 50.
Bandwidth 5 -Wideband / Width [0] | Narrow [1] Narrowband 6 Backlight - Display Illumination Time Bright [0] | 1-10 in 1 second steps Dual Standby - Dual 7 Watch, Dual OFF [0] | ON [1] Reception 8 9 Beep Prompt Keypad Beep Voice - Voice Prompt -Wideband (25 kHz bandwidth) or -Narrowband (12.5 kHz bandwidth). Time-out for the LCD backlight. (seconds) Monitor [A] and [B] at the same time. The display with the most recent activity ([A] or [B]) becomes the selected display.
DCS specific low-level digital signal. If the station you are listening to does not transmit this specific signal, you will not hear anything. Mutes the speaker of the transceiver in the absence of a 12 Rx CTCSS - Receiver CTCSS OFF[0] | see CTCSS Table in Appendix D specific and continuous sub-audible signal. If the station you are listening to does not transmit this specific and continuous signal, you will not hear anything.
You simultaneously will holding down the [PTT] and [SK1] key. 17 S-CODE - Signal Code 1[0] | 2[1] | 3[2] | 4[3] | 5[4] | 6[5] | 7[6] | 8[7] | 9[8] | 10[9] | 11[10] | 12[11] | 13[12] | 14[13] | 15[14] Scanning Resume Method : Scan Mode 18 Scanner Resume Selects 1 of 15 DTMF codes. The DTMF codes are programmed with software and are up to 5 digits each. Time[0]|Carrier [1] |Search [2] Method Time: Scanning will resume after a fixed time has passed.
Note: Names must be entered using software. Disables the [PTT] key on a channel that is already in use. The 22 Busy Lockout OFF [0] | ON [1] transceiver will sound a beep tone and will not transmit if the [PTT] key is pressed when a channel is already in use. Key Auto Lock – 23 Automatic Keypad OFF [0] | ON [1] Lock Enables access of repeaters in VFO/Frequency Mode. Direction 24 Frequency Shift None [0]｜Plus [1]｜Minus[2] Direction 25 26 27 28 Manual input frequency (range shift amount 0.
| Send code [2] Send sound: Transmits a cycling tone over-the-air. Send code: Transmits ANI code and alarm. This function is used eliminate squelch tail noise between 29 TAIL - Squelch Tail Elimination OFF [0] | ON [1] handholds that are communicating directly (no repeater). Reception of a 55 Hz or 134.4 Hz tone burst mutes the audio long enough to prevent hearing any squelch tail noise.
Appendix D. - CTCSS Table CTCSS CHART (Hz) Number Frequency Number Frequency Number Frequency Number Frequency Number Frequency 1 67.0 2 69.3 3 71.9 4 74.4 5 77.0 6 79.7 7 82.5 8 85.4 9 88.5 10 91.5 11 94.8 12 97.4 13 100 14 103.5 15 107.2 16 110.9 17 114.8 18 118.8 19 123.0 20 127.3 21 131.8 22 136.5 23 141.3 24 146.2 25 151.4 26 156.7 27 159.8 28 162.2 29 165.5 30 167.9 31 171.3 32 173.8 33 177.3 34 179.9 35 183.5 36 186.
Appendix E.
61 D356N 62 D364N 63 D365N 64 D371N 65 D411N 66 D412N 67 D413N 68 D423N 69 D431N 70 D432N 71 D445N 72 D446N 73 D452N 74 D454N 75 D455N 76 D462N 77 D464N 78 D465N 79 D466N 80 D503N 81 D506N 82 D516N 83 D523N 84 D526N 85 D532N 86 D546N 87 D565N 88 D606N 89 D612N 90 D624N 91 D627N 92 D631N 93 D632N 94 D645N 95 D654N 96 D662N 97 D664N 98 D703N 99 D712N 100 D723N 101 D731N 102 D732N 103 D734N 104 D743N 105 D754N 106 D023I
141 D223I 142 D225I 143 D226I 144 D243I 145 D244I 146 D245I 147 D246I 148 D251I 149 D252I 150 D255I 151 D261I 152 D263I 153 D265I 154 D266I 155 D271I 156 D274I 157 D306I 158 D311I 159 D315I 160 D325I 161 D331I 162 D332I 163 D343I 164 D346I 165 D351I 166 D356I 167 D364I 168 D365I 169 D371I 170 D411I 171 D412I 172 D413I 173 D423I 174 D431I 175 D432I 176 D445I 177 D446I 178 D452I 179 D454I 180 D455I 181 D462I 182 D464I 183 D46
Our high-quality product line includes: Analog business radio Analog professional radio Analog amateur radio Analog car radio DMR Commercial Digital radio DMR professional digital radio DMR Digital Base Station DMR Car Digital UHF/VHF radio DMR Amateur Digital UHF/VHF radio Disclaimer The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given.
