Page 22 KASAI Electronics Co , Ltd.
‘CONTENTS Page Introduction 1 © Safety Precautions Package Before Use Control Panel Function On Screen Display (OSD) Control Adjustment CS Button Power Management Image Adjustment Video Memory Modes A Note About The Video Memory, Modes UDC (Display Data Channel) x Specifications Federal Communications Commission Before Calling For Service wr «© Power Management
| | Congratulations! You are now the owner of our Color Monitor. To ensure proper operation, please carefully read this manual. After you've rec this manual, keep it in a safe place for future reference. This SAGA / EVA Auto Scan Color Display is a monitor designed for use with [EM PS/2 PCs (Personal Computers) and compatibles which can utilize the Video Graphics Array (VGA) standard. Typical examples are IBM compatible PC, PC IAT, 386, 386sx, 485, 486sx.
disconnected the monitor from the supply main if the monitor is not to be used for an extended period of time. = Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personal. = Do not place objects on top of the monitor cabinet, which could “into vents or which could cover them znd prevent proper «w+. of the monitor's electronics.
g instate the tilt / Swivel base «Place the monitor upside-down with the screen facing you, « Hold the base upside-down. + Insert the tab into the slot on the monitor Rotating the base clockwise until hearing a clicking sound. * SR 1 Computer connection i Notice: Shut down the power of the computer before connecting the A monitor. « Connect the monitor power. « Connect the monitor signal cable.
Bi . Signal Cable Description: PIN NO.
Cage ABR 3 i — ane fre. Control rel function Alt functions 2g adjusted from the Microprocessor based digital controls. Buttons on the front of the monitor allow you to adjust image easily through an 05D menu. The allowing is 3 description of use for each button. | bod Rotation control rob: to adjust tit 2 REC: recall the factory preset made. BSO nonfood. on screen display onion button | Use this knob Tor selecting the level of the selected fem 10 be 4. increase adjusted (increase) 6.
Making adjustments to the i parameters of the monitor are on EE (OSD) Control Adjustment mage size, position and operating quick and easy with the On Screen Display Control system, using only the OSD button increase & decrease button, left & right bu son. A quick example is given below to familiarize you with the use of the controls. Following is an outline of the available adjustments 03D.
abi his AL sid SE oa man on Kl lL EYP n shows you the current level of the selected H-size Decrease button to adjust the level to fit size. When you have finished, press the ’ The bar gap control: se fie Increase or the screen or your desired 08D button again to exit OSD. and exit from the On Screen Display £ this button will show the OSD. To remove the display, either wait 20 seconds of press this button re Use this button to start/enter (OSGOOD. If there is no OSD, One press © again.
MLE LID ] This monitor has a microprocessor-based On Screen Display (OSD) control system for adjusting the following items: Contrast, Brightness, Horizontal width, Horizontal position, vertical height and position, Side pincushion and trapezoid. When you make adjustments to any of the above items, the microprocessor will automatically memorize the adjustments you made. Your setting will be maintained even if you tun off tae monitor and turn it on again.
Rosin ni iid SRR ATE i 1 A Note Aho! There'is“a total of 14 video memory modes, generally more modes than you will use at any one time. Of these 14 modes, 6 are factory fixed modes that can not be changed. The remaining 8 dares are left blank (empty) If you use up the 8 blank modes and sill have more new video modes, the monitor will delete the lowest memory mode and add the new mode.
DDC [Display Data Channel) DDE: a: communication channel over which the monitor automatically informs the ‘host system (PC) about its capabilities. This monitor has DDC . NOTE: The PC must support ODC functions to do this. AP 1. General Information Model C5780 TRY SIZE { VIEWABLE] [15° [1387 TYPE 15" CONVENTIONAL DOT PITCH 026mm FACE PLACE NON-GLARE Video INPUT SIGNAL ANALOGUE AMP BANDWIDTH _[MHz HORIZONTAL {FREQUENCY S0-BEKHZ RESOLUTION MAX 1280 DOTS VERTICAL |FREQUENCY.
| soon (FCC) Federal Communications Commies: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.