SmartMat Quick Start Manual SmartMat (SM-W32/SM-W42) Quick Start Manual Ver 1.
SmartMat Quick Start Manual Table of Contents 1. Initial Set-Up .......................................................................................................... 1-0. Things Required for Initial Set-up ............................................................. 1-1. 0kg Reset (Required to Conduct Right After Inserting Batteries) ................ 1-2. Wi-Fi Settings ......................................................................................... 1-3. Prepare the Mat Management Software .
SmartMat Quick Start Manual 1. Initial Set-Up Initial Set Up – Overall Flow 1-1 0kg Reset 1-2 WiFi Settings 1-3 Admin Soft 1-0. Things Required for Initial Set-up SmartMat (Hardware) Wi-Fi (2.4GHz) ➢ SSID and Password ➢ Alphanumeric 8 to 63 characters Security Limitation Secret mode: SmartMat can perform MAC address verification: SmartMat can perform but please check with the network administrator in advance ➢ DHCP: SmartMat does not perform.
SmartMat Quick Start Manual 1-1. 0kg Reset (Required to Conduct Right After Inserting Batteries) 0kg reset is the auto-adjustment function based on the user location. SmartMat does not work without 0kg reset, even after inserting the dry cell batteries. Please make sure to carry out 0kg reset! a. Insert dry cell batteries and push 0kg reset button without putting anything on the SmartMat DO NOT PUT ANYTHING ON THE MAT when carrying out 0kg reset.
SmartMat Quick Start Manual b. Set-up the WiFi connection via the recommended internet browser and connect SmartMat to the Internet Input “192.168.4.1” into your browser, and the WiFi setting page will be displayed. Input the SSID and Password, and then the light will blink green. If the lamp turnes red, it indicates SmartMat is not connected to the internet. Please confirm if SSID/PWD of WiFi is correct and whether Wi-Fi network is properly performed.
SmartMat Quick Start Manual b. How to Set the Measured Products b1. Register the Measured Products to Products Master Click New Product Creation from Product Master Register Product and Product Picture b2. Link the Measured Products and SmartMat 1. Back to Top and Click Products Icon Choose the Products from Products Master c. How to Set the Measurement Parameters Click Setting Icon in “Remaining” Row Set Display Mode and Parameters (Max & Unit Weight, Threshold etc.
SmartMat Quick Start Manual Under the default settings, email alert generates when the remaining weight falls behind the preset threshold. If you want to receive the email alert when the remaining weight exceeds the preset threshold, change the Remaining Mode to “Increase”. d. Notification and Auto-Order Settings Once the alert/order setting is complete, automatic notification/order is being initiated at the preset threshold parameter. d1. Auto Web-Order d2.
SmartMat Quick Start Manual Click “Create location (large)” in the Location master and fill in the necessary data. Once the location (large) is created, also click location (middle) and location (small) and fill in the data subsequently. e2. Link the Measured Products and Location Back to “TOP” and click icon in the “place” row Designate the location of SmartMat at 3 layers (large, middle and small) Location (middle and small) should not be set as blank.
SmartMat Quick Start Manual 2. How to Use SmartMat 2-1. How to Use the Mat Management Software a. Mat Management Screen b. How to Change Wi-Fi Follow (1-2b) and input the new WiFi information, then the settings will be updated. c. Change the Measured Products Once you register the new measured products, follow (1-3-b2) and link the mat and products again. (You will need to register the products again) d.
SmartMat Quick Start Manual e. Email Address and Notification Coverage of Recipients Mat management administrator will receive the notification of all the SmartMats; each user will receive notification on the relevant SmartMat he/she monitors. Notification and email alert are delivered to you every 10:00am (default settings and can be changed) f.
SmartMat Quick Start Manual STEP3 (Factory Reset Button): If the issues are not solved after STEP2, press the factory reset button longer using the pin to reset to the factory set initial configuration. 2-3. Online Support Please see our online support for the configuration, basic function, troubleshooting and the latest news and additional services. Our support desk information is available via online.
SmartMat Quick Start Manual 2-4. For Further Information / Inquiry Please contact us in case the issues are not solved after (2-2) Troubleshooting, and (2-3) Support. [ Smart Shopping Customer Support for SmartMat] Email ： support@smartmat.jp Call ： +81-50-1746-8179 (For Current SmartMat User Only) Operating Hours: 9:00am to 6:00pm (Except for Sat, Sun and Year End Holidays) 3.
SmartMat Quick Start Manual Operating Environment 0℃〜35℃ / 30〜85%RH Storage Environment -20℃〜60℃ 10〜95%RH Splash-Proof IPX3: Resistant to spray water at 60C from vertical Cautiously Statement – In order to use SmartMat safely PROHIBITED CAUTION Do not use or store the SmartMat within the reachable scope of babies and infants.
