I N S TA L L AT I O N MA N UA L Coda 4” Centerset Basin Faucet FUS-13802 www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
7/8” (22mm) 19.7 º 10 1/8” (257mm) 8 5/16” (21mm) ∅ 1 15/16” (∅ 50mm) ∅ 1 3/4” Prior (∅ 45mm) ∅ 1 15/16” • (∅ 50mm) 1 3/8” (35mm) to Installation: Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-7750703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
FUS-13802 Diagram and Parts List D1 D2 D3 A B C A. Faucet Body D. Aerator Assembly B. Putty Plate D1. Aerator Washer C. Mounting Nut D2. Aerator D3.
Faucet Dimensions 4
Lift Rod Drain Diagram and Parts List Dimensions 1 a 2 b 3 4 5 c d 6 e 7 f 8 g a. Drain Body e. Mounting Nut b. Rubber Washer f. Tailpipe Washer c. Concave Washer g. Tailpipe d.
Step1: Remove mounting hardware Remove mounting nut (C) and putty plate (B) from threaded mounting pipe A A B B tty s Pu ber m Plu C C Step 2: Install faucet A A B tty s Pu ber m Plu B C Apply a small amount of putty to the groove along the bottom outer edge of the putty plate (B). Secure putty plate (B) to faucet.
C Step 3: Secure faucet Tighten mounting nuts (C) onto threaded mounting pipe from underneath the countertop or sink (HAND-TIGHTEN ONLY) A B tty s Pu ber m Plu C C C Step 4: Connect waterlines to faucet and main valve D1 D2 D3 Thread hot & cold waterlines (not included with faucet) to threaded mounting pipe. (A. Hot Side: Left, B. Cold Side: Right). Secure other end of waterlines to the angle stops. Tighten both ends with adjustable wrench until snug.
Step5: Install drain • Remove tail pipe (g), mounting nut (e), plastic washer (d), and concave washer (c) from drain body (a) a b c d e f g a b c d e e f g a b a b c d e f g c d e a b c Install drain bodyd(a), with rubber washer (b) attached,einto the drain hole. From underneath, attach concave washer (c) (narrow end up), plastic washer (d), and mounting nut (e) to drain body (a). Secure tightly to sink with an adjustable wrench • • Tighten mounting nut (e) with g snug.
C C Step7: Install drain • Connect tailpipe (g) to p-trap g C C Step 6: Flush faucet D1 D2 D3 9 Remove aerator assembly (D). Loosen aerator cover (D3) with adjustable wrench. Remove aerator (D2) and aerator washer (D1). Turn water on for 1 minute to remove any debris.
Replacement Part List - FUS-13802 1 4 1 5 6 2 2 3 7 1. Metal Handle HOT & COLD 2. Base Ring 3. Cartridge – HOT 4. Aerator Washer 5. Aerator 6. Aerator Cover 7. Cartridge – COLD 8. Putty Plate 10 9.
Replacement Part List - Lift Rod Drain 1 2 3 2. Drain Body 3. Rubber Washer 4. Concave Washer 4 5. Plastic Washer 5 7. Tailpipe Washer 6 7 8 11 1. Drain Cap 6. Mounting Nut 8.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work 10 properly, take the following corrective steps: PROBLEM 11 ACTION Hot or cold cartridge (3 13 or 7) may be loose Aerator drips or has inconsistent water flow pattern Aerator (5) may be dirty Unscrew aerator cover Hot Cold or not seated properly (6) with adjustable Water Water wrench.
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.
Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance www.kraususa.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.